2018

A3/S3 Sedan & Cabriolet/RS 3
Audi Pre-Delivery Inspection
Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided
Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS
Diagnosis for using GFF for PDI function tests
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle

Vehicle Preparation

Exterior (continued)

 Check Elsa for open campaigns and updates

 Inspect exterior for damage, dings, dents and surface
scratches

 Deactivate vehicle transport mode*
This step must be performed with the engine off, and ignition on

Lighting and Windshield

 Set adaption channel to enable CD Ripping using Guided
Functions (if equipped with NAV)*

 Test exterior lighting functions

 Set service reminder*

 Install wiper blades

 Test front washers (and headlight washers if equipped)*

 Perform any open campaigns*
 Set the service intervals to 10k instead of 5k during PDI or
existing 2017 vehicles that are set incorrectly

Trunk Inspection
 Verify trunk is operational

1. Click on the “Special functions” tab

 Verify operation of emergency release handle

2. Scroll down to ‘Maintenance’

 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*

3. Select the 17 - inspection with oil change - 10,000 miles,
USA function test
4. Perform the function test, but make sure you select
“USA” as the country variant and when the question
“Which service display should be reset?” comes up,
select #2 (Oil service display and inspection service
display).
5. Then the MMI® indicator should now properly display the
following values

 Verify tool kit is installed securely in luggage compartment
 Verify inflatable repair kit and compressor are present (Cabriolet and RS 3 only)
 Set spare tire pressure (Sedan only)*
 Check battery clamps for proper torque*
Interior

− Next oil service in 10,000 miles / 365 days

 Verify operation of all seat belts and latches

− Next inspection service at 20,000 miles / 730 days

 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*

Exterior

 Check rear view mirror operation*

 Check all key buttons and features*

 Verify operation of all interior lights

 Inspect the outer door seals at all four doors and clean any
visible adhesive using D 002 000 A2 Adhesive Remover or
Acetone

 Verify operation of heated seats (if equipped)

Effective 7-11-2018-US
Version 1.5

 Verify operation of manual folding 2nd row
PRE-DELIVERY INSPECTION (PDI) | 1

2018

A3/S3 Sedan & Cabriolet/RS 3
Audi Pre-Delivery Inspection
Interior (continued)

On-Hoist Inspection

 Verify proper operation of climate control*

 Remove transport suspension blocks (follow ELSA instruction)

 Inspect operation of all power outlets*
 Check panoramic sunroof and sunshade operation*
 Verify the glove compartment opens and closes properly
 Verify operation of front Passenger Occupant Detection
System

 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check underside of vehicle for fluid leaks and loose components
 Inspect wheel bolts for proper torque

Settings

 Install wheel locks (if equipped)

 Verify operation of MMI® touch pad (if equipped)

 Install wheel bolt covers and center caps as supplied*

 Set time source setting to “GPS” and set auto daylight savings time to “on.”*

 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*

 Set Time to “Automatic setting” and “Automatic time zone”
 Verify and set language and measurement units*
 Verify Speech Dialog System is operating*
 Set “Entertain. Fad.” in parking aid to an audible level*
 Set dealership location in navigation (if equipped)*
 Turn off Manual Speed Warning (if equipped)*
Media / Radio / SAT
 Verfiy operation of all USB ports
 Verify operation of AMI or aux. input (if equipped)
 Verify operation of CD/DVD player (if equipped)
 Insert SD card and test function of all slots
 Program the presets to local stations
 Verify HD Radio is turned “off”*
Audi connect® (USA ONLY) (if equipped)
 If Audi connect is not functioning with an error message,
“The myAudi Server is currently unavailable”, reference TSB
2048436 to activate service

Driving Performance
 Check horn operation
 Verify hold and release of electronic parking brake
 Verify engine Start-Stop System functionality*
 Verify engine performance and acceleration*
 Verify transmission operation, including shift paddles (if
equipped)
 Test drive vehicle applying brakes several times*
 Check steering/tire alignment
 Check for squeaks, rattles and wind noise
 Calibrate rear view mirror*
 Verify quality of radio reception in AM/FM/SiriusXM® bands
Driver Assistance
 Verify cruise control/ACC functionality (if equipped)
 Verify Audi side assist functionality (if equipped)
 Verify Audi side assist functionality Pre sense rear (if
equipped)

 Verify Audi connect® Information Packet is present (if
equipped)*

 Verify Audi active lane assist functionality (if equipped)

 Verify system connects to mobile network (if equipped).
Review TSB 2042942 for additional information*

 Verify operation of High-beam assistant (if equipped)

 Turn on the wireless network (if equipped)*
 Turn on the Wi-Fi® hotspot (if equipped)*
 Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)*
 Check Wi-Fi® hotspot functionality (if equipped)
 Enable Google EarthTM (if equipped)*

Effective 7-11-2018-US
Version 1.5

 Verify operation of parking system (if equipped)*
 Activate NAV and follow directions back to dealership (if
equipped)
Convertible Functionality (Cabriolet only)
 Test operation of power folding top
 Verify convertible top manual closing tools are present

PRE-DELIVERY INSPECTION (PDI) | 2

2018

A3/S3 Sedan & Cabriolet/RS 3
Audi Pre-Delivery Inspection
Post-Road Test Inspection
 Interrogate fault memory and upload diagnostic log to
GFF Paperless Server
 Select reset interval in the MIB Service and Checks menu if
it is not displaying correct 10K and 20K intervals
 Perform a battery test*
 Check service interval and verify correct interval is displayed
 Check engine oil level*
 Check all fluid levels and top off if necessary
 Ensure the yellow tire pressure tag is installed on the
steering wheel
 Apply Inventory Maintenance Sticker**
 Install showroom charger to ensure battery remains
charged at all times**

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.

Technician Signature

Effective 7-11-2018-US
Version 1.5

Last 8 of VIN

Completion Date

PRE-DELIVERY INSPECTION (PDI) | 3