TIS Service Bulletin

Page 1 of 5

SI B01 13 18
Warranties

June 2018
Technical Service

X5 PHEV, I3 REX AND I8 FUEL TANK PRESSURE SENSOR:
LIMITED WARRANTY EXTENSION TO 10 YEARS/120,000 MILES
MODEL
F15 (X5 xDrive40e
iPerformance) (N20
Engine) Model Years
2016 and 2017
produced 7/6/2015 to
7/31/2017

I01 (i3 Rex) (IB1
Engine) Model Years
2014, 2015, 2016 and
2017 produced
6/4/2013 to 4/29/2017

I12 (i8) (B38T Engine)
Model Years 2014,
2015, 2016 and 2017
produced 4/16/2014 to
3/31/2017

Note: The “Model” information above is for informational purposes only, it is not the only deciding
factor.
To determination vehicle eligibility and that this coverage applies, always perform a VIN-specific DCSnet
Warranty Inquiry first; please refer to the “Eligible Vehicles” section of this bulletin for further details.

INFORMATION
For the eligible vehicles, BMW of North America, LLC (“BMW NA”) is extending the limited warranty for the
vehicle’s Fuel Tank Pressure Sensor to:


10 years/120,000 miles as determined by the vehicle’s original in-service date












This “component-specific” limited warranty extension applies
to defects in materials or workmanship.
This coverage is subject to the same vehicle eligibility
requirements, limitations, and exclusions that apply to the
BMW New Vehicle Limited Warranty for Passenger Cars and
Light Trucks.
The F15 (X5) sensor is displayed for reference only.
F15 (X5) and I01 (i3 Rex): The fuel pressure sensors are
available separately.
I12 (i8): The fuel pressure sensor is integrated within the fuel
pump, is not available separately.
Please check ETK for VIN-specific parts.

https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/465... 7/5/2018

TIS Service Bulletin

Page 2 of 5

Note: This bulletin is notice of a “limited warranty extension.” This is NOT a notice of a Recall
or Service Action.
There is no immediate repair required unless the BMW vehicle is currently experiencing this problem.
Customer Notification Letter
Even though this is NOT a Recall, BMW NA will be sending VIN-specific customer notification letters in a
phased release.

ELIGIBLE VEHICLES
To assist you in identifying those vehicles that have this “component-specific” extended limited warranty
coverage, the DCSnet Warranty Vehicle Inquiry has been updated with the VIN and Component-specific
“Vehicle Comment” shown below:

SI B01 13 18: For this vehicle, the Fuel Tank Pressure Sensor limited warranty for defects in
materials or workmanship has been extended to 10 year/120,000 mile as determined from the
original in-service date. This coverage is subject to the same vehicle eligibility requirements,
limitations, and exclusions that apply to the BMW New Vehicle Limited Warranty for
Passenger Cars and Light Trucks. Please see (DC 16 11 90 01 00).
Note: Before performing a repair and submitting a claim under this extended coverage, first confirm that the
vehicle has the above “Notice of Limited Warranty Extension” in the DCSnet Warranty Inquiry “Vehicle
Comments” section.
If the vehicle has the above flag, the vehicle was determined to be eligible and included by meeting all of the
applicable criteria, for example:


Series;



Model;



Engine type;



Model Years;



Production date (strictly by the mm/dd/yyyy version, in AIR dd/m/yyyy)

Based on applying all of the above criteria, if you have ELW eligibility and/or coverage questions, please
contact the Warranty department through IDS by selecting “Coverage, Policy and Coding” prior to performing
any repairs.

PARTS INFORMATION
Note: Please refer to the Electronic Parts Catalog (ETK/EPC), using the customer’s VIN to locate the
applicable replacement part numbers.





Only order these parts in the quantities needed to address customers’ vehicles that have confirmed
failures.
“Only in conjunction with” parts: When applicable, if ETK/EPC item identifies additional part(s) that

https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/465... 7/5/2018

TIS Service Bulletin

Page 3 of 5

must also be replaced/installed “in-conjunction” with performing a covered repair, these “required”
additional items are also covered under the terms of this extended limited warranty.


Also refer to ETK/EPC and the ISTA repair instructions for onetime-use fasteners/screws and other
information regarding repair-related gaskets, seals, fluid and/or lubricants that also need to be
replaced/used and claimed.

WARRANTY INFORMATION
The fuel tank pressure sensor component-specific limited warranty extension to 10 years/120,000 miles applies
to “eligible US-specification BMW vehicles” that are registered, operated and have their covered repair
performed by an authorized BMW center in the United States (including Puerto Rico).
The existing limited warranty coverage for the whole vehicle and other components has not changed.
This coverage supersedes the coverage that is provided under the BMW Certified Pre-Owned Program or any
BMW Group Vehicle Service Contract that applies to the vehicle.
Should the fuel tank pressure sensor fail again, this component is covered by the remaining portion of the
extended limited warranty coverage period.
Non-Qualifying Repairs
Non-US specification vehicles, ineligible vehicles, eligible vehicles operated and repaired outside the United
States and Puerto Rico and/or the diagnosis and repair of other unrelated issues are not covered under the
terms of this limited warranty extension.
Qualifying Repairs - Claim Submission
Claim this work with the defect code and labor operations provided below.

Defect Code:

1611900100

I01 REX I12 F15 PHEV Fuel Tank Pressure
Sensor

Labor Operation:

Labor Allowance:

Description:

00 00 006

Refer to KSD2/AIR

Performing “vehicle test” (with vehicle
diagnosis system – checking faults) (Main
work)

Refer to KSD2/AIR

Performing “vehicle test” (with vehicle
diagnosis system – checking faults) (Plus
work)

Refer to KSD2/AIR

Connect an approved battery charger/power
supply (indicated in KSD2 as “Charging
battery”)

Refer to KSD2/AIR

Connect an approved battery charger/power
supply (indicated in KSD2 as “i3) (luggage
compartment service cap removed)

Or:
00 00 556
And:
61 21 528
Or, for the i3 only:
61 21 529

https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/465... 7/5/2018

TIS Service Bulletin

Page 4 of 5

And:
61 25 910

Refer to KSD2/AIR

Recharging high-voltage battery unit (to high
voltage charging socket)

Work time (WT)

Performing vehicle diagnosis – test module

14 FRU (F15 X5); 29 FRU
(I01 i3 Rex); 56 FRU (I12
i8)

Replacing the fuel tank pressure sensor
(includes extracting fuel from the fuel tank
and filling)

And, as necessary:
61 00 006
And:
00 66 718

If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead of 00
00 006.
Refer to KSD2/AIR for the corresponding flat rate unit (FRU) allowances.
Work time labor operation code 61 00 006 is not considered a Main labor operation; however, it does require an
individual punch time and an explanation on the repair order and in the claim comments section.
Overlapping Labor Procedure – Other Repairs
If invoicing the KSD2 flat rate labor operation codes for other repair work results in overlapping labor, for those
flat rate labor operations that are affected, you can now:


Replace the stated KSD2 “FRU allowance” with a “reduced FRU value” to eliminate the overlapping labor.

For help in identifying the overlapping labor, please refer to the AIR FRU Plausibility Check (Overlapping Labor
Tool) that is located in the AIR Client.
Eligible other repair work being claimed under a different defect code will require separate punch times.
On the repair order and in the claim comment section, please identify and itemize those labor operations being
claimed with a “reduced FRU value.”
Previous Customer-pay Repairs – Limited Warranty Extension Reimbursement
For the “Models” listed above and under this extended limited warranty, BMW of North America, LLC will
provide reimbursement for “qualifying customer-pay repairs” that were performed on an eligible vehicle prior to
the release of this component-specific limited warranty extension.
Customer-pay repairs are subject to the applicable vehicle and coverage eligibility requirements, exclusions and
limitations that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.
Repairs that do not Qualify for Reimbursement
Repairs that do not qualify for reimbursement include repairs performed on ineligible vehicles, eligible vehicles
operated and repaired outside the United States (including Puerto Rico), and/or the diagnosis and repair of
other unrelated issues. This exclusion applies to repairs, including consequential, that were performed using
non-genuine BMW parts and/or used passenger car or light truck parts.
Requesting Reimbursement for a Previous Repair that Qualifies
For a customer to request reimbursement for a “qualifying customer-pay repair” performed either by an
authorized BMW center or independent repair shop located in the United States (including Puerto Rico), please

https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/465... 7/5/2018

TIS Service Bulletin

Page 5 of 5

have him/her submit his/her reimbursement request “online” at www.BMW-RP.com under the following
reference:


B-ELWR 2018 Fuel Tank Pressure Sensor 10Y120M

Reimbursement Request Procedure
The online process is initiated by attaching/sending “PDF files” of the supporting documentation for the “prior
repair.”
The website and attached sample customer letter provides information as to “what” documentation is needed to
be supplied to support a prior repair.
The letter also includes alternative methods to request reimbursement, either through the mail or by fax as
described below:
BMW Customer Reimbursement Center
Attention: B-ELWR 2018 Fuel Tank Pressure Sensor 10Y120M
P.O. Box 561089
Dallas, Texas 75356
Fax number: 877-434-2992
Please allow 4-6 weeks for processing your request.
Should you have any questions concerning this reimbursement process, please call 1-844-857-0341.
BMW Owner/Operator Inquiries and Assistance
For all other questions, please contact the BMW’s Customer Relations and Services via email at
[email protected] or via telephone at 1-800-831-1117.
Please have your 17-character Vehicle Identification Number (VIN) available and include the VIN with all
communications.

ATTACHMENTS
View PDF attachment B011318 Fuel Tank Pressure Sensor Cust Letter.
[ Copyright ©2018 BMW of North America, Inc. ]

https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/465... 7/5/2018

REPRESENTATION OF PRINTED DOCUMENT

BMW

P.O. Box 619063
Dallas, TX 75261-9063
DO NOT MAIL REPAIR ORDER TO THIS ADDRESS

4-777-MXC01-0000001-001-000-000-000-000

JOHN DOE
123 ANY STREET
PAPERTOWN NJ, 12345

June 2018
This “Important Limited Warranty Information” applies to the BMW vehicle with the
Vehicle Identification Number (VIN) of AAAAAAAAAAAAAAAAA.
Dear BMW Owner/Lessee:
BMW is committed to delivering the ultimate in product satisfaction to our customers.
777-3000-0714

Towards that end, BMW is extending the limited warranty for the:
•

Fuel Tank Pressure Sensor

On the above-referenced vehicle to:
•

10 years/120,000 miles as determined by your vehicle’s original in-service date.

This “component-specific” limited warranty extensions apply to defects in materials or
workmanship. This coverage is subject to the same vehicle eligibility requirements, limitations,
and exclusions that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and
Light Trucks.
This is notice of a “limited warranty extension.” This is not a notice of a Recall or
Service Action.

Company
BMW of North America, LLC
BMW Group Company
Mailing Address
PO Box 1227
Westwood, NJ
07675-1227
Telephone
(800) 831-1117
E-mail
Customerrelations@
bmwusa.com
Website
bmwusa.com

If a repair to this component is required, please contact your nearest authorized BMW center in
the United States or Puerto Rico to schedule an appointment. Your authorized BMW center will
determine the vehicle’s eligibility and review the scope of repairs that are covered by this
component-specific limited warranty extension(s).
After vehicle inspection and diagnosis, eligible repair work will be performed by the authorized
BMW center in the United States (including Puerto Rico) free of charge.
Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the
United States and Puerto Rico and/or the diagnosis and repair of other unrelated issues are not
covered by this limited warranty extension. This exclusion applies to repairs, including
consequential, that were performed using non-genuine BMW parts and/or used passenger car or
light truck parts.
The integrity of our products is essential to BMW’s success and our customers’ trust. We are
determined to exceed your expectations and hope this warranty extension further enhances your
ownership experience.
Sincerely,
BMW of North America, LLC

B-ELWR 2018 Fuel Tank Pressure Sensor 10Y120M

REPRESENTATION OF PRINTED DOCUMENT
4-777-MXC01-0000001-001-000-000-000-000

Previous Customer-pay Repairs – Limited Warranty Extension Reimbursement
BMW of North America, LLC
June 2018
VIN AAAAAAAAAAAAAAAAA
Under these extended limited warranties, BMW of North America, LLC (“BMW NA”) will provide
reimbursement for “qualifying customer-pay repairs” that were performed on an eligible vehicle prior to
the release of these component-specific limited warranty extensions.
Customer-pay repairs are subject to the applicable vehicle and coverage eligibility requirements,
exclusions and limitations that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and
Light Trucks.
Repairs that do not Qualify for Reimbursement
Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the United States
and Puerto Rico and/or the diagnosis and repair of other unrelated issues. This exclusion applies to repairs,
including consequential, that were performed using non-genuine BMW parts and/or used passenger car or
light truck parts.
Requesting Reimbursement for a Previous Repair that Qualifies
If you previously had a “qualifying customer-pay repair” performed either by an authorized BMW center or
independent repair shop located in the United States (including Puerto Rico), please submit your
reimbursement request “online” at www.BMW-RP.com under the following reference:
Covered Component Code
B-ELWR 2018 Fuel Tank Pressure Sensor 10Y120M
To initiate the online process, you will be asked to attach PDF files of the required documentation as
outlined in the reimbursement checklist on the next page.
Alternative Method to Request Reimbursement
Alternatively, you may mail or fax your request and documentation to:
BMW Customer Reimbursement Center
Attention: B-ELWR 2018 Fuel Tank Pressure Sensor 10Y120M
P.O. Box 54067
Hurst, Texas 76054
Fax number: 877-434-2992
Please allow 4-6 weeks for processing your request.
Should you have any questions concerning this reimbursement process, please
call 1-844-857-0341.
For all other questions, please contact BMW’s Customer Relations and Services via email at
[email protected] or via telephone at 1-800-831-1117.
Please have your 17-character Vehicle Identification Number (VIN) available and include the VIN with all
communications.

B-ELWR 2018 Fuel Tank Pressure Sensor 10Y120M

REPRESENTATION OF PRINTED DOCUMENT
4-777-MXC01-0000001-001-000-000-000-000

Fuel Tank Pressure Sensor: Limited Warranty Extension to 10 Years/120,000 Miles
Previous Customer-pay Repair Reimbursement – Documentation Checklist
BMW of North America, LLC
Reimbursement is available to the BMW Owner/Lessee who incurred the expense.
When submitting a reimbursement for a previous repair, please provide legible copies of the following
documentation and include your VIN, name, address and your preferred contact telephone number(s):
Repair Order (RO) or Invoice
This document should include the following information:

Customer name and address
Vehicle Identification Number (“VIN”)
The date of repair
The mileage when the repair was performed
Itemized breakdown of the labor charges for all repairs* including diagnosis
Itemized breakdown of the parts, including any miscellaneous items, billed for all repairs*
*For repair orders containing multiple repair line items, only the specific line item expenses that relate
to the components that are covered by this extended limited warranty will be considered for
reimbursement.
Proof of Payment
Please provide a copy of at least one of the following items as valid proof of payment:

Repair order (RO)/invoice stamped and dated as “PAID”
Copy of a cancelled check
Copy of a signed credit/debit card receipt
Copy of a credit/debit card statement
Determining if an eligible vehicle’s repair qualifies for reimbursement:
Please use the following questions to review your repair order documentation prior to submitting a
reimbursement request:
1.

Why was the vehicle brought into the repair facility?

2.

What was the repair facility's diagnosis?

3.

What did the repair facility do to correct the concern and does it qualify?

B-ELWR 2018 Fuel Tank Pressure Sensor 10Y120M