ASTON MARTIN CLIENT SERVICES

QUARANTINE NOTICE
Reference number:

QN-10-1127V2

Issued: 9 August, 2018

Subject:

Fuel filler latch

Model(s):

Vantage 19MY

VIN Range:

Refer to the separately published list of Vehicle Identification Numbers (VINs)

Applicable to:

All Dealers

Distribute to:

After Sales Manager
Executive Manager
Service Manager
Sales Manager

Warranty Staff
Technician(s)
Parts Staff

Reason for Version 2 of this Service Action
Quarantine Notice QN-10-1127 included a step to test the filler door operation and only bond the parts if necessary.
This step has been removed. The changes to this document have a black line against them in the left margin. Please
destroy all copies of QN-10-1127 that you have and replace them with Quarantine Notice QN-10-1127V2.

Note:

This repair is the same as Service Action SA-10-1127V2. Use this Quarantine Notice for vehicles
that are not registered and have not been given to a Customer.
Some vehicles in the affected VIN list for this Quarantine Notice may now be registered and given
to a Customer. Make sure that you do a check of the Online Dealer Warranty (ODW) database to
make sure that all necessary work is done to every vehicle.

Reason for this Quarantine Notice
Aston Martin has found that the fuel filler latch mechanism can move out of position. If the fuel filler latch is not in the
correct position the fuel filler door will not open or close correctly.
Do the workshop procedure that follows to attach the fuel filler latch.

Workshop Procedure

9 August, 2018

Page 1 of 3

QUARANTINE NOTICE

1.

QN-10-1127V2

Remove the rear right-side wheel-arch liner (refer to Workshop Manual procedure 01.08.AK).

2. Remove the fuel filler latch from the clips that attach
it to the vehicle body (refer to Figure 1).

Figure 1
3. Apply Plexus MA300 adhesive in the location shown
by the red dot (refer to Figure 2).

Figure 2
4. Install the fuel filler latch into the clips that attach it to the vehicle.
Note: Make sure that you hear a “click” sound as the fuel filler latch engages into position.
5. Keep the fuel filler door open for a minimum of fifteen minutes while the Plexus adhesive cures.
CAUTION: IF YOU DO NOT GIVE THE PLEXUS ADHESIVE TIME TO CURE, THE FILLER LATCH MAY NOT BE
INSTALLED CORRECTLY.
6. Install the rear right-side wheel-arch liner (refer to Workshop Manual procedure 01.08.AK).

Part Data
Description

Part Number

Quantity

Plexus MA300

Local supply

As necessary

9 August, 2018

Page 2 of 3

QUARANTINE NOTICE

QN-10-1127V2

Warranty Data
Procedure and Labour Time

Description

Labour Time

Bond the fuel filler latch to the fuel bowl

0.75 hours

If you have any questions related to this Quarantine Notice, please contact: Aston Martin Technical
Services on: +44 (0) 1926 644720, email: [email protected],
Or contact your After Sales Manager.
The English version of this Quarantine Notice is written in
Simplified Technical English to ASD-STE100™.

9 August, 2018

Page 3 of 3