TSE

(Long stroke chamber recommended)

DRUM BRAKES
ABS SENSOR LOCATION:

Single:
Tandem:
Tridem:

SPINDLE NUT:

❒ No

❒ None
❒ None
❒ None
❒ 4 – Front and Middle
❒ Standard 3-Piece Nut

❒2
❒ 2 – Front
❒ 2 – Front
❒ 4 – Front and Rear

❒ 2 – Rear
❒ 2 – Middle
❒ 4 – Middle and Rear

❒ 4 – Both
❒ 2 – Rear
❒ 6 – All

Page 3

L544 Rev PP

DRUM BRAKE RTR® READY-TO-ROLL® PACKAGES*

❐ HXL3® Hendrickson

❐ Standard Service

Extended-Life

(1-Year Limited Warranty 9)

SPINDLE:

*Consult a customer service representative to ensure compatibility of the wheel-end equipment with the other selected suspension parameters.

System™

(3-Year Limited Warranty 9)

❐ HXL5® Hendrickson

Extended-Life

System™

(5-Year Limited Warranty 9)

❐ HXL7® Hendrickson

Extended-Life System™
(7-Year Limited Warranty 9)

❐ ConMet PreSet®

(5-Year Limited Warranty 9)

❐ HN
❐ HP
❐ Ductile Iron
❐ Dura-Light Hub
❐ Aluminum

❐ HN
❐ HP
❐ Ductile Iron
❐ Dura-Light Hub
❐ Aluminum

HP

❐ HN
❐ HP

HUB MATERIAL:

❐ HN
❐ HP
❐ Ductile Iron
❐ Dura-Light Hub®
❐ Aluminum

❐ Ductile Iron
❐ Dura-Light Hub
❐ Aluminum

Aluminum

HUB STYLE:

Hub Piloted

Hub Piloted

Hub Piloted

Hub Piloted

Hub Piloted

NUMBER OF STUDS:

10

10

10

10

10

BOLT CIRCLE DIAMETER:
WHEEL MATERIAL:

11.25"

11.25"

11.25"

11.25"

11.25"

❐ Aluminum
❐ Steel
❐ Steel / Aluminum
❐ Dual
❐ Super Single (SS)
❐ Super Single (LS)
❐ SAE 80/90
❐ Semi-Fluid Grease
❐ Synthetic 75W / 90
❐ Stemco Voyager
❐ Stemco Discover
❐ Stemco Guardian
❐ Federal Mogul

❐ Aluminum
❐ Steel
❐ Steel / Aluminum
❐ Dual
❐ Super Single (SS)
❐ Super Single (LS)
❐ SAE 80/90
❐ Synthetic 75W / 90

❐ Aluminum
❐ Steel
❐ Steel / Aluminum
❐ Dual
❐ Super Single (SS)
❐ Super Single (LS)

❐ Aluminum
❐ Steel
❐ Steel / Aluminum
❐ Dual
❐ Super Single (SS)
❐ Super Single (LS)

Semi-Fluid Grease

Semi-Fluid Grease

❐ Aluminum
❐ Steel
❐ Steel / Aluminum
❐ Dual
❐ Super Single (SS)
❐ Super Single (LS)
❐ Semi-Fluid Grease
❐ Synthetic 75W / 90

Standard

Standard

Standard

No (ConMet Included)

BEARING:
SPINDLE NUT:

Standard
Standard 3-Piece Nut

Standard

Standard

Standard
PRECISION320 Nut System

No (ConMet Included)
Standard 3-Piece Nut

HUBCAP TYPE:

Standard Bolt-On

Standard Aluminum Bolt-On

Standard Aluminum Bolt-On

Corrosion Resistant Bolt-On Standard Bolt-On

ABS TONE RING:

Yes

Yes

Yes

Yes

DUAL / SUPER SINGLE:
(SS) Short Stud
(LS) Long Stud
LUBE TYPE:

SEAL:

Nut System
PRECISION240 Nut System
or
or
PRECISION320® Nut System
PRECISION320 Nut System
PRECISION240®

Yes

9. Refer to Hendrickson publication L583 Comprehensive Warranty Statement for complete details.

Page 4

L544 Rev PP

DRUM OPTIONS
DRUM MATERIAL:
DRUM DUTY:

❐ Cast
❐ Standard

DRUM BALANCING:

Balanced

WHEEL FASTENERS:

❐ Yes10

AC C E S S O R Y I T E M S
STINGER:
SINGLE AXLE SLIDER
REPOSITIONING KIT 11:
MANUAL DUMP VALVE:
MUD FLAP BRACKET:
STOP BAR:
UNIVERSAL LOAD SCALE KIT:
OEM-INSTALLED UBL™ 12:

WHEEL STYLE / MATERIAL
TIRE SIZE:
COLD TIRE
PRESSURE SETTING (psi)17:
TRAILER-MOUNTED
INDICATOR LIGHT KIT:
WIRING HARNESS:
AIR PLUMBING KIT:
CONTROLLER TANK VALVE 20:
(Pressure Check)

10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

❐ No

Not included in VANTRAAX® Model Number — Sold Separately

❐ Yes
❐ Yes
❐ Yes
❐ Yes
❐ Yes
❐ Yes
❐ Yes

T I R E M A A X® K I T W O R K S H E E T 13,14
CONTROLLER TYPE:
ELECTRICAL CONNECTION:
HUBCAP TYPE:
LUBE TYPE:

❐ Fused
❐ Heavy Duty

❐ No
❐ No
❐ No
❐ No
❐ No
❐ No
❐ No

Length:

❐ 32"

❐ 36"

With Enclosure:

❐ Yes

❐ No

Not included in VANTRAAX Model Number — Sold Separately

❐ CP
❐ PRO
❐ Delphi Weather Pack (Standard)
❐ Blade Terminals15 (Hendrickson Controls approval required)
❐ Hendrickson Bolt-On
❐ Hendrickson Extended Bolt-On16
❐ Semi-Fluid Grease
❐ Oil
❐ Dual / Aluminum
❐ Dual / Steel or Combo
❐ Super Single / Aluminum (straight hose)
Super
Single
/
Steel
(outboard
valve
stem;
180-degree
hose)
❐
❐ Super Single / Steel (inboard valve stem; straight hose)
❐ 17.5" ❐ 19.5"
❐ 22.5"
❐ 24.5"
❐ 70
❐ 75
❐ 80
❐ 85
❐ 90
❐ 95
❐ 100 ❐ 105
❐ 110
❐ 115
❐ 120
❐ LED – 12V with 65-foot Cable (Standard)
❐ Incandescent – 12V
❒ Premium, 15-Foot, ABS-ready
❒ Standard, 18-inch, Wiring Adaptor Plug
❐ Manifold 19
❐ No
❐ Yes (CP Models Only)
❐ No

❐ LED – 12V with 35-foot Cable
❐ No15

❐ LED – 24V (Export18)

❒ Premium, 3-Foot, ABS-ready
❐ No15 (Hendrickson Controls approval required)

Two (2) wheel fasteners factory installed per wheel-end with balance packaged in plastic bag, taped and stretch wrapped to each wheel-end.

Hendrickson recommends the use of a Slider Repositioning Kit for all single-axle sliders used in conjunction with fixed suspensions. The kit locks the brakes and dumps the air on the sliding axle for ease of repositioning.
OEM-Installed UBL kits allow fleets and owner-operators to put the advantages of INTRAAX and HT Series to work in liftable applications.
Hendrickson does not provide warranty coverage for the installation, performance or components of a competitor brand tire inflation system installed on a Hendrickson suspension or trailer axle. Any consequential damages to the
Hendrickson suspension or trailer axle resulting from a failure to the competitor brand tire inflation system or components, whether installed by the OEM, repair facility or end-user customer, should be directed to the respective tire
inflation system manufacturer for warranty coverage.
When installing TIREMAAX, please contact Hendrickson to verify correct wheel-end component integration.

Controllers featuring blade terminals, require the light kit and wiring harness options to be "no".

Required for axles with TIREMAAX PRO equipped with cross-drilled spindles and using the castellated spindle nut. Please verify spindle nut requirements.
Refer to tire manufacturer’s recommended tire pressure. TIREMAAX PRO is restricted to cold tire pressure setting of 85-120 psi.
Please note, 12V is used in some export countries. If this is a new venture into a foreign country, please validate voltage requirements with Controls Engineering.
Not available for single-axle systems.
Not available with TIREMAAX PRO.

Page 5

L544 Rev PP

H E N D R I C K S O N S U S P E N S I O N A N D A X L E S AVA I L A B L E W I T H A I R D I S C B R A K E S ( A D B )
SUSPENSION/AXLE MODELS

AVAILABILITY

HKANT 23K, 40K, 46K, 69K23

ADB available

HKAT 50K, 69K25, 75K25, HKARL

ADB available without SURELOK®

HKANL, HKAL

ADB not available

DISC BRAKES*

WARNING:

IMPROPER WHEELS OR VALVE STEMS can interfere with air disc brakes and cause
rapid tire deflation, component damage, loss of vehicle control, property damage
or severe personal injury. Use only wheels and valve stems that provide proper
running clearance with air disc brakes equipped on the suspension. Contact
vehicle manufacturer to determine replacement wheels and valve stems approved
for the application.

*Please refer to L1225 at www.hendrickson-intl.com for more important information to consider when spec'ing air disc brakes.
HENDRICKSON MAXX22T™ ADB (Hendrickson Standard)

CONVERTER DOLLY APPLICATION:
DISC BRAKE APPROVAL:
PAD/LINING:
BRAKE CHAMBER:
ABS TONE RING / DUST SHIELD:
ABS SENSORS (Required):
ABS SENSOR LOCATION:

❐ No
❐ Yes (Service Only Chamber Available)
❐ Preapproval: 20,000 lb or less GAWR or up to 23,000 lb GAWR with appropriate tire SLR (See L809 for all Brake Certifications)