NHTSA ID Number: 10144688
Manufacturer Communication Number: SSP-990593
TSB/Document Date: 2018-09-17
Summary
eSelf-Study Program 990593 - 2019 Audi
A7
cameras
5th generation
6th generation
X
-
-
X
-
J519
X
-
-
X
-
J519
X
X
-
X
-
J519
X
X
-
X
-
J519
X
-
X
-
X
J1121
Possible combinations of different assist systems for parking at the launch of the Audi
A7.
The installation position of the surround view camera in the
exterior mirrors have been changed to extend their range.
They are located further outwards in the exterior mirrors of
the Audi
A7 and no longer "look" vertically downwards, but
are tilted outwards. This allows the side detection area to be
enlarged, which allows the area around the vehicle to be
detected better.
With the third generation of the surround view cameras,
two more two dimensional vehicle views are available:
A three dimensional view of the vehicle is available to
customers for the first time with the third generation
surround view cameras.
The viewing angle of the vehicle is not specified by the
system, but can be freely chosen by the customer via the
touchscreen. It is still possible to choose between three
different preset viewing angles via three virtual buttons in
the row of buttons.
>> Simultaneous view of the front left and front right wheels.
-and>> Simultaneous view of the rear left and rear right wheels.
91
Infotainment and Audi
connect
Introduction and overview of versions
The Audi
A7 features the MIB2+ version of the modular
infotainment matrix infotainment system. Customers can
choose between three MMI versions:
If the vehicle is equipped with Audi
connect vehicle-related
services (IW3), the following services may be available,
depending on the country:
MMI radio plus, MMI navigation and MMI navigation plus.
>>
>>
>>
>>
All three versions are based on the 2+ High version of the
modular infotainment matrix; MIB2+ High for short.
The MMI navigation and MMI navigation plus versions may
be equipped with Audi
connect, depending on the country.
However, they differ regarding the services available.
Audi
emergency call (license period: 10 years)
Online roadside assistance (license period: 10 years)
Audi
service request (license period: 10 years)
Vehicle status report (for example, Mileage, fuel tank level,
etc.)
(license period: 3 years)
>> Remote locking/unlocking (license period: 3 years)
>> Parking position (license period: 3 years)
The license period is three years after the vehicle’s first
registration. It can be renewed after this time has elapsed.
Depending on the country, the following Audi
connect
infotainment services may be available with MMI navigation:
>> Navigation data update (4 times per year online or via SD card
via myAudi portal)
>> Online routing
>> Individual news
>> Online traffic information
>> Twitter
>> Weather
>> Fuel prices
>> Parking information
>> Travel information
>> Destination entry via myAudi app
MMI navigation plus may, depending on the country, have
the following additional Audi
connect infotainment services:
>> Connected radio (no license period limits, but separate data
package required)
>> Google Earth
>> Google POI search via speech control
>> 3D city models
>> Messages (text message dictation) and e-mail
>> Traffic sign information
>> Hazard alerts
Reference
For further information on MIB2+, please refer to eSelf-Study Program 990293 The 2019 A8 Infotainment and Audi
Connect
Systems.
92
MMI navigation
(I8V + 7UG)
MESSAGES
MMI navigation plus
(I8T + 7UG)
MEDIA
TELEPHONE
SETTINGS
MEDIA
TELEPHONE
CAR
SETTINGS
MESSAGES
HELP
8.8" touch display with 1280 x 720 pixels
10.1" touch display with 1540 x 720 pixels
8.6" touch display with 1280 x 660 pixels
8.6" touch display with 1280 x 660 pixels
3D navigation system on SSD (7UG)
3D navigation system on SSD (7UG)
7" display in instrument cluster with driver information
system (9S7)
Audi
virtual cockpit (9S8)
AM/FM radio
AM/FM radio Connected radio (Internet radio)
Satellite radio (Sirius) (QV3)
Satellite radio (Sirius) (QV3)
Audi
music interface with 2 USB sockets, 1 SDXC card reader
and, depending on country, 1 SIM card reader (UF7)
Audi
music interface with 2 USB sockets, 1 SDXC card reader and,
depending on country, 1 SIM card reader (UF7)
Audi
Sound System 9VD
Bang and Oulfsen 9VS
Bluetooth interface (9ZX)
Bluetooth interface (9ZX)
UMTS/LTE data module (EL3) including Audi
connect
(IT1/IT3)
UMTS/LTE data module (EL3) including Audi
connect (IT1/IT3)
Emergency call & Audi
connect vehicle-related services (IW3)
Emergency call & Audi
connect vehicle-related services (IW3)
Optional equipment
Single DVD drive (7D5) (Optional)
Single DVD drive (7D5) (Optional)
Audi
music interface in rear with 2 USB sockets (UF8)
Audi
music interface in rear with 2 USB sockets (UF8)
Audi
smartphone interface (IU1)
Audi
smartphone interface (IU1)
Audi
phone box including wireless charging (9ZE)
Audi
phone box including wireless charging (9ZE)
Audi
phone box, light (for wireless charging only) (9ZV)
Audi
sound system (9VD)
Bang & Olufsen Premium Sound System with 3D sound (9VS)
(Standard)
Bang & Olufsen Advanced Sound System with 3D sound (8RF)
(Optional)
93
MIB2+ High without navigation system
The Audi
A7 features the MMI radio plus as standard. The
system is an MIB2+ High. In this version, however, it does
not have a navigation function or Audi
connect.
Information Electronics Control Module 1 J794 is installed
under the instrument panel in front of the glove box and
cannot be seen by the customer.
The MMI radio plus has the following features as standard:
>> Radio with phase diversity, FM dual tuner (very high frequency)
and AM tuner (medium wave) and background tuner.
>> Internal audio amplifier up to 180 W (9VD).
>> Bluetooth interface for HFP and A2DP (9ZX).
>> Speech dialogue system.
>> 1 image output for Audi
virtual cockpit.
>> 1 image output for both touch displays (1280 x 720 and
1280 x 660 pixels).
>> Audi
music interface with 1 SDXC card reader and 2 USB
sockets (UF7).
>> GPS receiver for time.
The following additional equipment can be ordered:
>> Functions integrated in J794:
>> Audi
sound system (9VD).
>> Functions in separate control units:
>> Single DVD drive (7D5).
>> Audi
phone box (9ZE).
94
MEDIA
MESSAGES
SETTINGS
MMI display J685 without MMI navigation
CAR
TELEPHONE
669_208
MIB2+ High with navigation system
The Audi
A7 can be equipped with the MMI navigation or
MMI navigation plus system. Both cases involve MIB2+
High devices.
The MMI display J685 has the same dimensions for the
MMI navigation and MMI navigation plus versions. The
active display, however, does not. It is possible to tell the
two versions apart very easily by counting the number of
menu items on the home screen.
MEDIA
MESSAGES
TELEPHONE
SETTINGS
The following equipment is standard:
>> Radio with phase diversity, FM dual tuner (very high frequency)
and AM tuner (medium wave) and background tuner.
>> SiriusXM radio (QV3).
>> Audi
music interface with 1 SDXC card reader, 2 USB sockets
(UF7).
>> 3D navigation with data on SSD with improved 3D city center
models (7UG).
>> UMTS/LTE-enabled mobile network module, possible data
transfer rates of up to 300 Mbit/s (EL3).
>> Emergency call and Audi
connect vehicle-related services (IW3).
>>
>>
>>
>>
Internal audio amplifier, 80 W (8RM) or 180 W (9VD).
Bluetooth interface (9ZX).
Speech dialog system.
7" display in instrument cluster (9S7) or Audi
virtual cockpit
(9S8).
669_163
MMI display J685 with MMI navigation
MEDIA
TELEPHONE
CAR
SETTINGS
MESSAGES
HELP
The following additional equipment/connect services can
be ordered:
MMI display J685 with MMI navigation plus
669_164
>>
>>
>>
>>
Single DVD drive (7D5).
Audi
smartphone interface (IU1).
Audi
phone box including wireless charging (9ZE).
Bang & Olufsen Premium Sound System with 3D sound and
705 W (9VS).
>> Bang & Olufsen Advanced Sound System with 3D sound and
1820 W (8RF).
95
Networking
Topology
Front Information Display
Control Head 2
J1060
Front Information Display
Control Head
J685
Mobile Device Charger 1
J1146
Driver Volume Control
E67
Control Module for
Emergency Call Module
and Communication Unit
J949
USB Distributor
R293
USB Connection 1
U41
DVD Player
R7
Instrument Cluster
Control Module
J285
Data Bus on Board
Diagnostic Interface
J533
Information Electronics Control Module 1
J794
1)
Digital Sound System
Control Module
J525
2)
Windshield Projection
Head Up Display Control
Module
J898
Driver Assistance Systems
Control Module
J1121
Comfort System Central
Control Module
J393
Close Range Communication Control Module
J1169
Rearview Camera System
Control Module
J7723)
Close Range Communication Control Module 2
J1170
669_180
Key:
Convenience CAN
LVDS
Infotainment CAN
USB wires
Modular infotainment matrix CAN (MIB)
Ethernet
Sub-bus systems
Composite video
MOST bus
Connect CAN
Connection only present if surround view cameras installed
Only installed from control module version B forward
3)
Not installed if surround view cameras installed
1)
2)
96
Touch display
Introduction
The 2019 A7 has two touch displays.
The upper display is for the MMI system; the lower display
is used, among other things, for operating the climate
control system.
The lower display is identical for all three MMI versions
available (MMI radio plus, MMI navigation and MMI navigation plus).
Connection to
J1060
Connection from
J794
The upper display can be installed in two different versions.
However, the only difference is the dimensions of the
display surface. The outer dimensions of the displays are
the same.
Vehicles equipped with MMI radio plus or MMI navigation
use the smaller display surface.
Front Information Display Conrol Head J685 (10.1 inch)
Technical features of the upper display
(MMI display J685)
With MMI navigation plus:
>> 10.1 inch.
>> 1540 x 720 pixels.
>> LVDS connection from J794: black.
669_165
Connection to
J1060
Connection from
J794
With MMI radio plus and MMI navigation:
>> 8.8 inch.
>> 1280 x 720 pixels.
>> LVDS connection from J794: blue.
The color coding of the LVDS connection on Information
Electronics Control Module 1 J794 to J685 is black for all
display versions.
Front Information Display Conrol Head J685 (8.8 inch)
669_166
Connection from
J685
Technical features of the lower display
(Lower touch display J1060)
>> 8.6 inch.
>> 1280 x 660 pixels.
Front Information Display Control Head 2 J1060
669_207
Reference
For further information on the displays and operation, please refer to eSelf-Study Program 990293, The 2019 A8 Infotainment and Audi
Connect Systems.
97
Control Module for Emergency Call Module and Communication Unit J949
Introduction
Antenna connection
Control Module for Emergency Call Module and Communication Unit J949 (referred to as the connectivity box) will be
introduced in the North American Region for the first time
in the 2019 A7.
The GSM, UMTS and LTE standards are supported. Two
external antennas are used for communication; they are
located in the bumper (rear right) and on the roof. The
antenna in the bumper (rear right) is usually used (Emergency Call Module Antenna R263). If this antenna’s reception is poor in an emergency call situation, the connectivity
box switches to the Roof Antenna R216.
It is a new development which replaces the mobile network
function of Data Bus On Board Diagnostic Interface J533
(gateway). The telephone module is "moved" from the
connected gateway to the connectivity box. The connectivity box assumes the tasks related to communicating with
the outside world. This affects, for example, the Audi![]()
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SSP-990593
Replacement Service Bulletin Number:
MFR Communication Date: 2018-06-29
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




