NHTSA ID Number: 10144236
Manufacturer Communication Number: TSBTRA077_R1
TSB/Document Date: 2018-09-10
Summary
TSB: SERVICE ACTION: FAST STATIC GEAR SHIFT LOGIC IMPROVEMENT (SA341) - This bulletin has been revised to include additional information. This bulletin provides the procedure to improve the logic of the Transmission Control Unit (TCU) on some 2018MY Stinger (CK) 2.0T & 3.3T vehicles, equipped with Shift-by-Cable (SBC) and produced from September 29, 2017 through February 7, 2018. These vehicles may experience improper 1st gear engagement when moving the shifter in a fast or abrupt manner from "Park" to "Sport Mode". To correct this condition, apply the improved logic to the TCU using the KDS ECU Upgrade function as described in this bulletin.
GROUP
TRA
MODEL
2018MY
Stinger (CK)
NUMBER
077 (Rev 1, 08/16/2018)
DATE
May 2018
TECHNICAL SERVICE BULLETIN
SUBJECT:
SERVICE ACTION: FAST STATIC GEAR SHIFT
LOGIC IMPROVEMENT (SA341)
NOTICE
This bulletin has been revised to include additional information. New/revised
sections of this bulletin are indicated by a black bar in the margin area.
This bulletin provides the procedure to improve the logic of the Transmission Control Unit
(TCU) on some 2018MY Stinger (CK) 2.0T & 3.3T vehicles, equipped with Shift-by-Cable
(SBC) and produced from September 29, 2017 through February 7, 2018. These vehicles may
experience improper 1st gear engagement when moving the shifter in a fast or abrupt manner
from “Park” to “Sport Mode”. To correct this condition, apply the improved logic to the TCU
using the KDS ECU Upgrade function as described in this bulletin. To confirm that the latest
reflash has been applied to vehicle you are working on, verify the ROM ID using the table on
page 2 of this bulletin. Before conducting the procedure, verify that the vehicle is included in
the list of affected VINs.
Kia
is requesting the completion of this Service Action on all affected vehicles, including in
dealer stock (prior to delivery).
Kia Diagnostic System (KDS)
NOTICE
A Service Action is a repair program without customer notification that is performed
during the warranty period. Any dealer requesting to perform this repair outside the
warranty period will require DPSM approval.
Repair status for a VIN is provided on WebDCS (Service → Warranty Coverage →
Warranty Coverage Inquiry → Campaign Information). Not completed Recall / Service
Action reports are available on WebDCS (Consumer Affairs → Not Completed Recall
→ Recall VIN → Select Report), which includes a list of affected vehicles.
This issue number is SA341.
File Under:
Circulate To:
X General Manager
X Service Advisors
X Technicians
X Service Manager
X Parts Manager
X Body Shop Manager Fleet Repair
Page 2 of 7
SERVICE ACTION: FAST STATIC GEAR SHIFT
LOGIC IMPROVEMENT (SA341)
SUBJECT:
ECU Upgrade Procedure:
To correct this condition, the ECU should be reprogrammed using the KDS
download, as described in this bulletin.
Upgrade Event Name
367. CK THETA 2.0T-GDI 8AT FAST STATIC GEAR SHIFT LOGIC IMPROVEMENT
373. CK LAMBDA 3.3T-GDI 8AT FAST STATIC GEAR SHIFT LOGIC IMPROVEMENT
NOTICE
A fully charged battery is necessary before ECU upgrade can take place. It is
recommended that the Midtronics GR8-1299 system be used in ECU mode during
charging. DO NOT connect any other battery charger to the vehicle during ECU
upgrade.
All ECU upgrades must be done with the ignition key in the ‘ON’ position.
Be careful not to disconnect the VCI-II connected to the vehicle during the ECU
upgrade procedure.
DO NOT start the engine during ECU upgrade.
DO NOT turn the ignition key ‘OFF’ or interrupt the power supply during ECU
upgrade.
When the ECU upgrade is completed, turn the ignition ‘OFF’ and wait 10 seconds
before starting the engine.
ONLY use approved ECU upgrade software designated for the correct model,
year.
NOTICE
Before attempting an ECU upgrade on any Kia model, make sure to first determine
whether the particular model is equipped with an immobilizer security system.
Failure to follow proper procedures may cause the PCM to become inoperative after
the upgrade and any claims associated with this repair may be subject to
chargeback.
ROM ID INFORMATION TABLE:
Upgrade Event #367 (2.0T) & #373 (3.3T)
Event
Model
Eng.
Trans.
CK RWD
367
2.0T
CK AWD
373
CK RWD
8AT Shift
by Cable
(SBC)
3.3T
TCU P/No.
ROM ID
Previous
New
95441 47560
TCK2T20NB0
TCK2T20NB1
95441 47620
TCK4T20NB0
TCK4T20NB1
95441 4J560
TCK0T33NB0
TCK0T33NB1
TCK0T33N10
To verify the vehicle is affected, be sure to check the Calibration Identification of the vehicle's ECM
ROM ID and reference the Information Table as necessary.
TSB: SA341 (Rev 1) Stinger (CK) May 2018
Page 3 of 7
SERVICE ACTION: FAST STATIC GEAR SHIFT
LOGIC IMPROVEMENT (SA341)
SUBJECT:
NOTICE
Prior to performing the ECU upgrade, be sure to check that the KDS is fully charged.
1.
Connect the VCI-II to the OBD-II
connector, located under the driver’s side
of the instrument panel.
NOTICE
The ECU upgrade function on
KDS operates wirelessly. It is
not necessary to perform the
upgrade via USB cable.
2.
With the ignition ON, turn ON the KDS
tablet. Select KDS from the home
screen.
3.
Confirm communication with VCI (A) and
then configure the vehicle (B) using the
AUTO VIN (C) feature.
B
A
C
4.
Select ECU Upgrade.
TSB: SA341 (Rev 1) Stinger (CK) April 2018
Page 4 of 7
SUBJECT:
5.
SERVICE ACTION: FAST STATIC GEAR SHIFT
LOGIC IMPROVEMENT (SA341)
The KDS will check the server for
recently uploaded Events and then
automatically download Upgrade Event
#367 or #373.
NOTICE
The vehicle must be identified in
Vehicle Selection to download
an Event for that vehicle.
6.
KDS
screenshot
shown
above
is
for
demonstration purposes only. Events shown in
screenshot are not applicable to this bulletin.
Select Auto Mode.
CAUTION
Do NOT attempt to perform a
Manual Mode upgrade UNLESS
Auto Mode fails. Always follow
the instructions given on the
KDS in either Auto or Manual
mode.
7.
Select the A/T system under the System
selection menu.
D
Touch ID Check (D) and confirm that the
latest update is available.
Select Upgrade Event #367 or #373
and select Upgrade to continue.
8.
The ECU upgrade will begin and the
progress of the upgrade will appear on
the bar graph. Upgrade part (1/2) (E) will
download the upgrade event to the VCIII. Upgrade part (2/2) (F) will upgrade the
ECU.
CAUTION
Do not touch the system
buttons (like ‘Back’, ‘Home’,
‘etc.’) while performing ECU
Upgrade.
TSB: SA341 (Rev 1) Stinger (CK) May 2018
E
F
Page 5 of 7
SUBJECT:
9.
SERVICE ACTION: FAST STATIC GEAR SHIFT
LOGIC IMPROVEMENT (SA341)
If a “Communication Fail” screen
appears, verify that the VCI-II and KDS
are communicating properly. Touch OK
and restart the procedure from step 4.
NOTICE
If an error notice continues to
appear or if the upgrade cannot
be performed, contact Techline
or GIT America Help Desk.
10. When instructed on the KDS, turn the
ignition OFF for ten (10) seconds then
back on. Touch OK to continue.
11. Once the upgrade is complete, touch OK
to finalize the procedure.
12. When prompted, select YES to check for
Diagnostic Trouble Codes (DTC) and
erase any DTCs stored such as EPS,
ESC, and TPMS that may have been set
during the upgrade.
13. Start the engine to confirm proper
operation of the vehicle.
TSB: SA341 (Rev 1) Stinger (CK) April 2018
Page 6 of 7
SERVICE ACTION: FAST STATIC GEAR SHIFT
LOGIC IMPROVEMENT (SA341)
SUBJECT:
Manual Upgrade Procedure:
NOTICE
The manual upgrade should ONLY be performed if the automatic upgrade fails.
If the automatic upgrade fails, turn the ignition OFF for about 10 seconds then place
it back in the ON position to reset the control unit BEFORE performing manual
upgrade.
See table below for Manual Mode passwords.
Manual Mode ECU Upgrade Passwords
Menu
CK THETA 2.0T-GDI 8AT (2WD) : 95441-47560
CK THETA 2.0T-GDI 8AT (4WD) : 95441-47620
CK LAMBDA 3.3T-GDI (NA) : 95441-4J560
Password
7560
7620
4560
1.
Within the ECU Upgrade screen displayed, select Manual Mode.
2.
Select the A/T system under the System selection menu. Select Upgrade Event #367 or
#373 and select Upgrade to continue.
3.
Select the appropriate control unit part number with reference to the ROM ID Information
Table on page 2, and select OK.
4.
Enter the appropriate password from the Manual Mode password table above and select
OK.
5.
The upgrade will begin and the progress of the upgrade will appear on the bar graph.
6.
When instructed on the KDS, turn the ignition OFF for ten (10) seconds then back on.
Touch OK to continue.
7.
Once the upgrade is complete, touch OK to finalize the procedure.
8.
When prompted, select YES to check for Diagnostic Trouble Codes (DTC) and erase any
DTCs stored such as EPS, ESC, and TPMS that may have been set during the upgrade.
9.
Start the engine to confirm proper operation of the vehicle.
TSB: SA341 (Rev 1) Stinger (CK) May 2018
Page 7 of 7
SERVICE ACTION: FAST STATIC GEAR SHIFT
LOGIC IMPROVEMENT (SA341)
SUBJECT:
AFFECTED VEHICLE RANGE:
Model
Production Date Range
Stinger (CK) 2.0T
September 29, 2017 through March 26, 2018
Stinger (CK) 3.3T
September 29, 2017 through April 12, 2018
WARRANTY INFORMATION:
N Code: N99 C Code: C99
Claim
Type
Causal P/N
Qty.
Repair
Description
0
(SA341)
2.0T Transmission
Logic Improvement
(SA341)
3.3T Transmission
Logic Improvement
95441 47560
V
95441 4J560
Labor Op
Code
Op
Time
180022R0
0.3
M/H
180022R1
0.3
M/H
Replacement
P/N
Qty.
N/A
0
NOTICE
VIN inquiry data for this repair is provided for tracking purposes only. Kia retailers
should reference SA341 when accessing the WebDCS system.
TSB: SA341 (Rev 1) Stinger (CK) April 2018
- Fits for GM Turbo 350 Automatic Transmissions
- 12" Chrome Shifter Arm
- Gated Lock-Out Safety Feature
- Gated Lock-Out Safety Feature
- Note: This Shifter Mounts Directly on the Transmission...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: TSBTRA077_R1
Replacement Service Bulletin Number:
MFR Communication Date: 2018-08-16
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.