NHTSA ID Number: 10143828
Manufacturer Communication Number: NTB16-110i
TSB/Document Date: 2018-08-20
Summary
2013-2017 ALTIMA AND 2014-2016 ROGUE; 4 CYLINDER WITH DTC P0776 AND/OR P0841 AND/OR JUDDER WITH P17F0 OR P17F1 STORED This bulletin has been amended to add additional information under If You Confirm on page 1, the Claims Information and to add part numbers to Table B. No other changes have been made.
9. With the engine still running and at idle,
depress the brake pedal and shift the
CVT into neutral (N).
Confirm that all of the required
conditions indicated in Figure 4L are
being met.
Required
conditions
10. Select Start.
Figure 4L
11. While maintaining all conditions shown in
Figure 4L and the “Current status”
indicates “EXECUTING”, shift the CVT
into D and then wait until the Current
status indicates “COMPLETED”.
NOTE: This may take up to three (3)
minutes to complete.
Figure 5L
12. When the screen in Figure 6L is
displayed, select End.
Figure 6L
13. Turn the engine OFF and then back ON.
87/97
NTB16-110i
14. Select FWD CLUTCH POINT
LEARNING and then Start.
Figure 7L
15. With the engine still running and at idle,
depress the brake pedal and shift the
CVT into neutral (N).
Confirm that all of the conditions
indicated in Figure 8L are being met.
Required
conditions
16. Select Start.
Figure 8L
17. While maintaining all conditions shown in
Figure 8L and the Current status
indicates EXECUTING, shift the CVT into
R and then wait until the Current status
indicates COMPLETED.
NOTE: This may take up to 3 minutes to
complete.
Figure 9L
88/97
NTB16-110i
18. When the screen in Figure 10L is
displayed, select End.
Figure 10L
SELECT LEARNING (DRIVE/REVERSE LEARNING)
Perform Select Learning (Drive / Reverse Learning) as follows:
1. Set the parking brake.
2. Start the engine, and then wait five (5) seconds.
3. Move the shift selector to the N position and hold more than two (2) seconds, and then
move it to the D position and wait for transmission engagement.
4. Repeat step 3 ten times.
5. Move the shift selector to the N position and hold for more than 2 seconds, and then
move it to the R position and wait for transmission engagement.
6. Repeat step 5 ten times.
7. Move the shift selector to the P position, and then turn the ignition OFF.
89/97
NTB16-110i
TROUBLE SHOOTING
The Dummy Cover Will Not Sit Flush
Clutch pack
seated correctly
If the dummy cover does not sit flush, the
clutch pack may not be fully seated.
Figure 1M shows clutch pack fully
seated.
Clutch pack is not fully seated if it is
not below the surface that the dummy
cover bolts to.
Use instructions below to fully seat
clutch pack.
Surface dummy
cover seats on
NOTE: Always handle the clutch pack by
the input shaft.
Figure 1M
Dummy cover
1. Remove the dummy cover.
Figure 2M
Clutch pack
2. Pull up the clutch pack by the input shaft
to remove the entire clutch pack.
Make sure the O-ring is not installed
at this time, or it could be damaged
during reassembly.
Input shaft
Figure 3M
90/97
NTB16-110i
Clutch pack
Clutch pack layers
3. Gently using an appropriate tool align the
layers of the clutch pack.
Bottom of the clutch pack shown in
Figure 4M.
Appropriate
tool
Align layers
Figure 4M
4. Re-insert the entire clutch pack while
holding the input shaft.
5. Gently jiggle the input shaft until the
clutch pack seats below case lip.
Input shaft
6. If the clutch pack does not seat, rotate
back and forth from the input shaft and
jiggle.
7. If the clutch pack still does not seat,
repeat from step 2.
Clutch pack
Figure 5M
91/97
NTB16-110i
PARTS INFORMATION
The following part kits are only to be used if the Sub-assembly is being replaced.
DESCRIPTION
PART #
QUANTITY
Altima
31214-28X9E
BELT-PULLEY KIT
1
Rogue
31214-28X9B
CLAMP (Hose Spring Clamp)
16439-7S01E
2
VALVE ASSY KIT-CONTROL (Valve body)
Valve Assy Kit-Control includes:
VALVE ASSEMBLY-CONTROL (5)
STRAINER ASSY-OIL, AUTO TRANS
BRACKET (Temperature sensor bracket)
BAND (Zip tie for bracket)
GSKT-OIL PAN
SEAL-LIP (Between CVT and control valve)
Seal, O-Ring (fluid filler plug gasket)
SEAL-O RING (Transfer case to CVT AWD only)
WASHER-DRAIN (For drain plug)
Loctite 5460 Sealant (1) (3)
Nissan
NS-3 CVT Fluid (1) (4)
Transmission Cooler Cleaner (1)
31705-28X9B
1
1
1
1
1
1
1
1
33118-4BA0A
1
11026-JA00A
1
999MP-LT5460P
(2)
999MP-CV0NS3 As needed
999MP-AM006P As needed
If just a Control Valve is being replaced, use the following parts.
DESCRIPTION
PART #
QUANTITY
VALVE ASSY KIT-CONTROL (Valve body)
31705-28X9B
1
CLAMP (Hose Spring Clamp)
16439-7S01E
2
Valve Assy Kit-Control includes:
VALVE ASSEMBLY-CONTROL (5)
1
STRAINER ASSY-OIL, AUTO TRANS
1
BRACKET (Temperature sensor bracket)
1
BAND (Zip tie for bracket)
1
GSKT-OIL PAN
1
SEAL-LIP (Between CVT and control valve)
1
Seal, O-Ring (fluid filler plug gasket)
1
WASHER-DRAIN (For drain plug)
11026-JA00A
1
Nissan NS-3 CVT Fluid (1) (4)
999MP-CV0NS3 As needed
Transmission Cooler Cleaner (1)
999MP-AM006P As needed
(1) This item can be ordered through the Nissan Maintenance Advantage program: Phone:
877-NIS-NMA1 (877-647-6621) or Website: Order via link on dealer portal
www.NNAnet.com and click on the “Maintenance Advantage” link.
(2) One container of Loctite 5460 Sealant is good for approximately 5 repairs. This sealant
is not included in any kit.
(3) Bill out Loctite 5460 Sealant under expense code 008. Do not include the Loctite 5460
Sealant part number on the claim.
(4) For warranty repairs, Nissan NS-3 CVT Fluid must be used. For customer pay repairs,
Nissan NS-3 CVT Fluid or an equivalent is recommended.
(5) Includes QR label, CD-R, and control valve assembly.
92/97
NTB16-110i
CLAIMS INFORMATION
IF Belt Inspection is not Performed and Sub-Assembly is replaced
Submit a Primary Part (PP) type line claim using the following claims coding:
MODEL
OPERATION
All
CVT R&R
PFP OP CODE SYM DIAG FRT
JD01AA
JD023A
(2)
Altima
3.7
(1)
ZE
32
Replace CVT Sub-assembly
JX50AA
(includes control valve R&I)
Rogue
3.8
All
Reprogram TCM (when applicable)
JE99AA
(2)
(1) Reference the Parts Information Table and use the applicable BELT-PULLEY KIT Part
Number 31214-***** as the Primary Failed Part.
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
NOTE: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.
EXPENSE CODE
EXPENSE CODE
008
DESCRIPTION
5460 Sealant
MAX AMOUNT
$12.46
--------------------------------------------------------------------------------------------------------------------
Claims Information continued on the next page.
93/97
NTB16-110i
Claims information continued.
OR
If Belt Inspection is Performed and Sub-Assembly is replaced (belt inspection shows
signs of belt slip, NG)
Submit a Primary Part (PP) type line claim using the following claims coding:
MODEL
OPERATION
All
CVT R&R
PFP OP CODE SYM DIAG
FRT
JD01AA
JD023A
(2)
Altima
Inspect CVT Chain, Chain = NG
JX36AA
1.1
(Includes control valve R&I)
Rogue
(1)
ZE
32
Altima
2.9
Replace CVT Sub-assembly
JX45AA
Rogue
3.0
All
Reprogram TCM (when applicable)
JE99AA
(2)
(1) Reference the Parts Information Table and use the applicable BELT-PULLEY KIT Part
Number 31214-***** as the Primary Failed Part.
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
NOTE: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.
EXPENSE CODE
EXPENSE CODE
008
DESCRIPTION
5460 Sealant
MAX AMOUNT
$12.46
OR
If Only Control Valve is replaced:
Submit a Primary Part (PP) type line claim using the following claims coding:
OPERATION
PFP OP CODE SYM DIAG FRT
Inspect CVT Chain, Chain = OK
JX37AA
0.3
Replace Valve Body
(1)
JD48AA
ZE
32
(2)
Reprogram TCM (When Applicable)
JE99AA
(2)
(1) Reference the Parts Information Table and use the VALVE ASSY KIT-CONTROL part
number (31705-*****) as the Primary Failed Part.
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
NOTE: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.
94/97
NTB16-110i
Check-off parts as they are used in the Service Procedure and attach to work order
PARTS KITS REFERENCE TABLE (Parts are listed in order of installation)
CHECK
DESCRIPTION
PART #
OFF
PUMP ASSY-OIL 31340-28X0A
PUMP ASSY-OIL
SEAL-O RING
31526-28X0C
Kit 31340-28X8A includes:
RING-SNAP
31506-1XF12
SEAL-O RING
31526-28X0A
(O-ring between CVT case and side cover)
Altima
31209-28X9A
PULLEY ASSY - CVT
(Belt and pulley “sub-assembly”)
Rogue
31209-28X9B
Loctite 5460 Sealant
999MP-LT5460P
31377-1XD00
BOLT
(or 31377-1XZ0B)
SEAL-O RING
31526-28X0C
Rogue only
(For pulley retainer bolts)
SEAL-OIL,DIFF
38342-3VX0A
(Differential side oil seal; CVT case side)
BRG ASSY-THRUST NEEDLE (Thrust bearing)
See page 97
SEAL ASSY-OIL
31375-1XF00
(Torque converter oil seal; converter housing)
SEAL-OIL,DIFF (Differential side oil seal;
38342-3VX0B
converter housing side, front wheel drive only)
SEAL-O RING (For input shaft)
31526-80X01
Loctite 5460 Sealant
999MP-LT5460P
BOLT
31377-1XD00
FLTR ASSY-OIL,AUTO TRANS (CVT fluid filter)
31726-28X0A
SEAL-O RING (For filter cover)
31526-3VX0A
SEAL-LIP (Between CVT and control valve)
31528-1XZ0A
BRACKET (Temperature sensor bracket)
31069-3VX0D
VALVE ASSY-CONT (Valve body)
31705-28X0B
BAND (Zip tie for bracket)
24224-3VX0A
STRAINER ASSY-OIL, AUTO TRANS
31728-28X0A
GSKT-OIL PAN
31397-1XF0D
WASHER-DRAIN (For drain plug)
11026-JA00A
Seal O-Ring (Speed Sensor)
31526-1XG0C
Transmission Cooler Cleaner
999MP-AM006P
CLAMP (Hose Spring Clamp)
16439-7S01E
SEAL-O RING (CVT filler plug at converter housing) 31526-3VX0B
Nissan NS-3 CVT Fluid
999MP-CV0NS3
SEAL-O RING (Transfer case to CVT, AWD only)
33118-4BA0A
95/97
QUANTITY
1
1 (of 7)
1
1
1
As needed
19 (of 42)
6 (of 7)
1
1
1
1
1
As needed
23 (of 42)
1
1
1
1
1
1
1
1
1
1
As needed
2
1
As needed
1
NTB16-110i
DESCRIPTION
PART #: 31407-
BEARING THICKNESS
QTY
THRUST BEARING
1XZ0B
1XZ0C
1XZ0D
1XZ0E
1XZ1A
1XZ1B
1XZ1C
1XZ1D
3.57
3.75
3.93
4.1
4.28
4.46
4.61
4.79
1 of each is
included in the
Pulley Kit. Select
1 for installation.
96/97
NTB16-110i
PART KITS VISUAL REFERNECE
The following Figures show the smaller components of KIT-PULLEY.
KIT- CONTROL VALVE is not shown.
31375 - 1XF00
Figure H shows the
assorted seals, Orings, etc. in “KITPULLEY”
Figure I
PUMP ASSY-OIL parts
BRG ASSY-THRUST NEEDLE parts
Figure J
Figure K
97/97
NTB16-110i
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB16-110i
Replacement Service Bulletin Number:
MFR Communication Date: 2018-07-06
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS
, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.