NHTSA ID Number: 10143483
Manufacturer Communication Number: NTB18-039
TSB/Document Date: 2018-08-06
Summary
VOLUNTARY SERVICE CAMPAIGN 2016-2017 LEAF LITHIUM-ION BATTERY CONTROLLER REPROGRAM INTRODUCTION Nissan
is conducting this voluntary service campaign on certain specific model year 2016-2017 LEAF vehicles to reprogram the Lithium-Ion Battery Controller (LBC). This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PC630 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY Dealers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private parties, vehicles presented by transient (tourists) owners, and vehicles in a dealer?s inventory.
26a
Figure 20
NOTE: If the reprogram will not complete, see the next page (page 14) to RETRY the
reprogram update.
13/27
NTB18-039
HV BATTERY (Lithium Ion Battery Controller) module recovery
CAUTION: If reprogramming does not complete and the !? displays as shown in Figure 21:
Check battery voltage (12.0 – 15.5V).
Ignition is ON, Ready Mode is OFF.
External Bluetooth® devices are
OFF.
All electrical loads are OFF.
293A0-
Select Retry and follow the on
screen instructions.
Retry may not go through on first
attempt and can be selected more
than once.
293A0-_ _ _ _ _
XXXXXXXXXXXXXXXXXXX
Figure 21
OR: If reprogramming does not complete and the X displays as shown in Figure 22:
Do not disconnect plus VI or shut
down Consult III plus if
reprogramming does not complete.
Check battery voltage (12.0 – 15.5V).
CONSULT A/C adapter is plugged in.
Ignition is ON, Ready Mode is OFF.
Transmission in Park.
All C-III plus / plus VI cables are
securely connected.
All C-III plus updates are installed.
293A0293A0-_ _ _ _ _
XXXXXXXXXXXXXXXXXXX
Figure 22
Select Home, and then restart the
reprogram procedure from the
beginning.
14/27
NTB18-039
27. Erase all DTCs:
a. Turn “ignition” OFF by depressing the power switch once.
The screen in Figure 23 will read OFF after pressing the power switch once.
ON to
OFF
Figure 23
b. Wait 1 minute with the ignition OFF.
c. Turn “ignition” ON by depressing the power switch twice.
Do not step on the brake pedal when depressing the power switch.
The screen in Figure 24 will read ON after pressing the power switch twice.
NOTE: Do not be confused by any screen messages. At this point, simply
turn the “ignition” ON.
OFF
to ON
OFF
Figure 24
15/27
NTB18-039
d. Wait for the bar graph in the ERASE window to complete 100%.
Step
27d
Figure 25
28. Verify the part number has changed.
a. Print a copy by selecting Print.
b. Attach the copy to the repair order.
c. Once a copy has been printed, select Confirm.
Step
28
293A0-_ _ _ _ _
293A0-_ _ _ _ _
XXXXXXXXXXXXXXXXXXX
HV/BATTERY
Step
28a
Step
28c
Figure 26
16/27
NTB18-039
29. After Confirmation has completed, select Home.
Step
30
Step
29
Figure 27
30. Close C-III plus by selecting “X” in Figure 27.
Do not turn OFF the CONSULT PC.
31. Turn the ignition OFF.
32. Disconnect the GR8 from the 12 volt battery.
33. Place the vehicle in “READY to drive” mode:
Apply the parking brake.
Depress the brake pedal.
Depress the power switch once.
The meter and gauges will illuminate.
Ready light ON.
34. Open C-III plus.
17/27
NTB18-039
35. Once the plus VI is recognized, select Diagnosis (All Systems).
Plus VI
recognized
Step
35
Figure 28
36. Select LEAF and 2016 or 2017, or Automatic Selection(VIN).
If Automatic Selection(VIN) is selected, wait for the Reading VIN screen to
complete.
If the screen in Figure 29 does not display, skip to step 38.
37. Select Select or Detect Vehicle, whichever displays.
This works,
too
Step
36
Step 37: May display
Detect Vehicle
Figure 29
18/27
NTB18-039
38. Verify the VIN in VIN or Chassis # matches that of the vehicle.
If the correct VIN exists, select Confirm.
Verify
here
XXXXXXXXXXXXXXXXXXX
If OK, select
Confirm
Figure 30
39. Wait for System Call to complete.
Figure 31
19/27
NTB18-039
40. If DTCs are present, select ERASE.
If no DTCs are present, skip to Step 43.
Step
40
Figure 32
41. Select Execute.
Step
41
Figure 33
20/27
NTB18-039
42. Select Close.
Step
42
Figure 34
43. Using the arrow keys, select Page 3/3, and then select HVAC.
Select
HVAC
Arrow
keys
Page
3/3
Figure 35
21/27
NTB18-039
44. Select ERASE.
Step
44
Figure 36
45. Select Execute.
Step
45
Figure 37
22/27
NTB18-039
46. Select Close.
Step
46
Figure 38
NOTE: If DTC B2631 (SUNLOAD SENSOR) sets again, this is okay.
DTC B2631: OK
Figure 39
23/27
NTB18-039
47. Select Back.
Step
47
Figure 40
48. Using the arrow keys, go to Page 3/3, and then select MULTI AV.
Select
MULTI AV
Arrow
keys
Page
3/3
Figure 41
24/27
NTB18-039
49. Select ERASE.
Step
49
Figure 42
50. Select Execute.
Step
50
Figure 43
25/27
NTB18-039
51. Select Close.
Step
52a
Step
51
Figure 44
52. Once all DTCs have been erased:
a. Select Home, and then on the next screen, select Yes (picture not shown).
b. Close C-III plus, turn OFF the CONSULT PC, and then disconnect the
CONSULT PC and plus VI from the vehicle.
c. Turn “ignition” OFF (depress power switch once).
53. Verify the repair is complete:
a. Place the vehicle in the “READY to drive” mode (press power switch while stepping
on the brake pedal).
b. Verify no error messages are displayed in the meter and gauges or center multifunction control panel.
26/27
NTB18-039
CLAIMS INFORMATION
Submit a “CM” line claim using the following claims coding:
CAMPAIGN (“CM”) ID
PC630
DESCRIPTION
Reprogram Lithium Ion Battery Controller
Reprogram Not Needed
27/27
OP CODE
PC6300
PC6301
FRT
0.4 hrs
0.3 hrs
NTB18-039
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB18-039
Replacement Service Bulletin Number:
MFR Communication Date: 2018-06-05
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.