NHTSA ID Number: 10143409
Manufacturer Communication Number: 18135 01
TSB/Document Date: 2018-08-06
Summary
18135-01 - Customer Satisfaction Program. Certain vehicles may have a condition in which power steering software may disable power steering assist within a few seconds after a warm restart, or while idling or driving at very low speeds following a warm restart. If this occurs, a chime will sound and the vehicle?s driver information center will display the following message: ?DRIVE WITH CARE & SERVICE POWER STRG.ASSIST?. Restarting the vehicle may resolve the software fault. Reprogram the power steering control module.
Customer Satisfaction Program
18135 Loss Of Power Steering Assist
Reference Number:
Revision Description:
Attention:
Release Date: April 2018
Revision: 01
This bulletin has been revised to update the condition statement and customer letter.
Please discard all copies of Bulletin 18135.
N172133990
All involved vehicles that are in dealer inventory must be held and not delivered to customers, dealer
traded, or used for demonstration purposes until the repair contained in this bulletin has been performed
on the vehicle.
This program is in effect until April 30, 2020.
Make
Cadillac![]()
Model
ATS
Model Year
From
To
2013
2013
RPO
Description
Involved vehicles are marked “open” on the Investigate Vehicle History screen in GM Global Warranty Management
system. This site should always be checked to confirm vehicle involvement prior to beginning any required inspections
and/or repairs.
Condition
Correction
Certain 2013 model year Cadillac
ATS vehicles may have a condition in which power steering software
may disable power steering assist within a few seconds after a warm restart, or while idling or driving at
very low speeds following a warm restart. If this occurs, a chime will sound and the vehicle’s driver
information center will display the following message: “DRIVE WITH CARE & SERVICE POWER
STRG.ASSIST”. Restarting the vehicle may resolve the software fault.
Reprogram the power steering control module.
Parts
No parts are required for this repair.
Warranty Information
Labor
Operation
9103691
9103796
9103804
9103805
Description
Power Steering Control Module Reprogramming with SPS
Module Programming Not Required
Customer Reimbursement Approved
- For USA and Canada dealers only
- For Export dealers only
Customer Reimbursement Denied – For USA dealers only
Labor
Time
0.3
0.2
N/A
0.2
N/A
Trans.
Type
ZFAT
ZFAT
ZFAT
Net
Item
*
**
***
ZFAT
N/A
Note: To avoid having to “H” route the customer reimbursement transaction for wholesale approval, it must be submitted
prior to the repair transaction.
* To avoid warranty transaction rejections, the SPS Warranty Claim Code(s) must be entered when submitting this
transaction.
** SPS Warranty Claim Code is NOT required when submitting this transaction.
*** For USA and Canada: Submit the dollar amount reimbursed to the customer in Net/Reimbursement. Submit $20.00
administrative allowance in Net/Admin Allowance.
For Export: Submit the dollar amount reimbursed to the customer in Net/Reimbursement.
Service Procedure
Note: Carefully read and follow the instructions below.
•
Ensure the programming tool is equipped with the latest software and is securely connected to the data link
connector. If there is an interruption during programming, programming failure or control module damage may
occur.
•
Stable battery voltage is critical during programming. Any fluctuation, spiking, over voltage or loss of voltage will
interrupt programming. When required install the PSC-550 or EL49642 SPS Programming Support Tool to maintain
system voltage. If not available, connect a fully charged 12 V jumper or booster pack
disconnected from the AC
voltage supply. DO NOT connect a battery charger.
Copyright 2018 General Motors
. All Rights Reserved.
Page 1 of 3
Customer Satisfaction Program
18135 Loss Of Power Steering Assist
•
Turn OFF or disable systems that may put a load on the vehicles battery such as; interior lights, exterior lights
(including daytime running lights), HVAC, radio, etc.
•
Clear DTCs after programming is complete. Clearing powertrain DTCs will set the Inspection/Maintenance (I/M)
system status indicators to NO.
•
If the Same Calibration/Software Warning is noted on the SPS Controller screen, do NOT attempt to program the
module. No further action is required. Refer to the Warranty section of the bulletin and use labor operation code
9103796, Module Programming Not Required.
1.
Reprogram the Power Steering Control Module. Refer to Power Steering Control Module Programming and Setup
in SI.
2.
Record SPS Warranty Claim Code on job card for warranty transaction submission.
Dealer Responsibility
All new, used, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc. in dealers' possession
and subject to this program must be held and inspected/repaired per the service procedure of this bulletin before
customers take possession of these vehicles. Involved vehicles must be held and not delivered to customers, dealertraded, released to auction, used for demonstration, or any other purpose.
All GM Certified Used vehicles currently in the dealers’ inventory within the Certified Pre-Owned Inventory System
(CPOIS) will be de-certified and must be held and remedied per the service procedure in this bulletin. Upon submitting
an accepted/paid warranty transaction in the Global Warranty Management (GWM) system, the vehicle can be re-certified
for sale within the CPOIS system, or once again be used in the CTP program.
Dealers are to service all vehicles subject to this program at no charge to customers, regardless of mileage, age of vehicle,
or ownership, through April 30, 2020. Customers who have recently purchased vehicles sold from your vehicle inventory,
and for which there is no customer information indicated on the involved vehicle listing, are to be contacted by the dealer.
Arrangements are to be made to make the required correction according to the instructions contained in this bulletin. A
copy of the customer letter is provided in this bulletin for your use in contacting customers. Program follow-up cards
should not be used for this purpose, since the customer may not as yet have received the notification letter.
In summary, whenever a vehicle subject to this program enters your vehicle inventory, or is in your facility for service
through April 30, 2020, you must take the steps necessary to be sure the program correction has been made before
selling or releasing the vehicle.
Dealer Reports
For dealers with involved vehicles, a listing with involved vehicles has been prepared and will be provided to U.S. and
Canadian dealers through the GM GlobalConnect Recall Reports, or sent directly to export dealers. The listing may
contain customer names and addresses obtained from Motor Vehicle Registration Records. The use of such motor
vehicle registration data for any purpose other than follow-up necessary to complete this program is a violation of law in
several states/provinces/countries. Accordingly, you are urged to limit the use of this report to the follow-up necessary to
complete this program.
Customer Notification
USA & Canada - General Motors
will notify customers of this program on their vehicle (see copy of customer letter included
with this bulletin).
Export - Letters will be sent to known owners of record located within areas covered by the US National Traffic and Motor
Vehicle Safety Act. For owners outside these areas, dealers should notify customers using the attached sample letter.
Customer Reimbursement
Customer requests for reimbursement of previously paid repairs to correct the condition described in this bulletin are to
be submitted to the dealer prior to or by April 30, 2019. See General Motors
Service Policies and Procedures Manual,
Section 6.1.11 – Product Field Action Customer Reimbursement Procedure (USA & Canada) or local Policies and
Procedures, for details.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of
conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained
technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT
assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your
vehicle may benefit from the information.
We Support
Voluntary Technician
Certification
Page 2 of 3
Customer Satisfaction Program
18135 Loss Of Power Steering Assist
May 2018
This notice applies to your vehicle, VIN: ________________________________
Dear General Motors
Customer:
We have learned that your 2013 model year Cadillac
ATS may have a condition in which power steering software may
disable power steering assist within a few seconds after a warm restart, or while idling or driving at very low speeds
following a warm restart. If this occurs, a chime will sound and the vehicle’s driver information center will display the
following message: “DRIVE WITH CARE & SERVICE POWER STRG.ASSIST”. Restarting the vehicle may resolve the
software fault.
Your satisfaction with your ATS is very important to us, so we are announcing a program to prevent this condition or, if it
has occurred, to fix it.
What We Will Do: Your GM dealer will reprogram your power steering control module to address this concern. This
service will be performed for you at no charge until April 30, 2020. After that, any applicable warranty will apply.
What You Should Do: To limit any possible inconvenience, we recommend that you contact your dealer as soon as
possible to schedule an appointment for this repair. By scheduling an appointment, your dealer can ensure that the
necessary parts will be available on your scheduled appointment date.
Reimbursement: Even though you may have already had repairs for this condition, you will still need to take your
vehicle to your dealer for additional repairs. If you have paid for repairs for the condition described in this letter, please
complete the enclosed reimbursement form and present it to your dealer with all required documents. Working with
your dealer will expedite your request, however, if this is not convenient, you may mail the completed reimbursement
form and all required documents to Reimbursement Department, PO Box 33170, Detroit, MI 48232-5170. The
completed form and required documents must be presented to your dealer or received by the Reimbursement
Department by April 30, 2019, unless state law specifies a longer reimbursement period.
If you have any questions or concerns that your dealer is unable to resolve, please contact the appropriate Customer
Assistance Center at the number listed below.
Division
Cadillac![]()
Puerto Rico – English
Puerto Rico – Español
Virgin Islands
Number
1-800-458-8006
1-800-496-9992
1-800-496-9993
1-800-496-9994
Text Telephones (TTY)
1-800-833-2622
We sincerely regret any inconvenience or concern that this situation may cause you. We want you to know that we will
do our best, throughout your ownership experience, to ensure that your Cadillac
ATS vehicle provides you many miles
of enjoyable driving.
Terry M. Inch
Executive Director
Global Connected Customer Experience
Enclosure
GM Recall: 18135
Page 3 of 3
GLOBAL SAFETY FIELD INVESTIGATIONS
DCS4738
URGENT - DISTRIBUTE IMMEDIATELY
Date:
May 02, 2018
Subject: 18135-01 – Customer Satisfaction Program
Loss Of Power Steering Assist
Revised condition statement and customer letter.
Models: 2013 Cadillac
ATS
To:
All General Motors
Dealers
This bulletin has been revised to update the condition statement and customer
letter. Please discard all copies of Bulletin 18135.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS
May 2018
This notice applies to your vehicle, VIN: .
Dear :
We have learned that your model year may
have a condition in which power steering software may disable power steering assist within a
few seconds after a warm restart, or while idling or driving at very low speeds following a warm
restart. If this occurs, a chime will sound and the vehicle’s driver information center will display
the following message: “DRIVE WITH CARE & SERVICE POWER STRG.ASSIST”.
Restarting the vehicle may resolve the software fault.
Your satisfaction with your is very important to us, so we are announcing a
program to prevent this condition or, if it has occurred, to fix it.
What We Will Do: Your dealer will reprogram your power steering control
module to address this concern. This service will be performed for you at no charge until
April 30, 2020. After that, any applicable warranty will apply.
What You Should Do: To limit any possible inconvenience, we recommend that you contact
your dealer as soon as possible to schedule an appointment for this repair. By
scheduling an appointment, your dealer can ensure that the necessary parts will be available
on your scheduled appointment date
Reimbursement: Even though you may have already had this condition corrected, you will
still need to take your vehicle to your dealer for additional repairs. If you have paid for repairs
for the condition described in this letter, please complete the enclosed reimbursement form
and present it to your dealer with all required documents. Working with your dealer will
expedite your request, however, if this is not convenient, you may mail the completed
reimbursement form and all required documents to Reimbursement Department, PO Box
33170, Detroit, MI 48232-5170. The completed form and required documents must be
presented to your dealer or received by the Reimbursement Department by April 30, 2019,
unless state law specifies a longer reimbursement period.
If you have any questions or concerns that your dealer is unable to resolve, please contact the
Customer Assistance Center at .
We sincerely regret any inconvenience or concern that this situation may cause you. We want
you to know that we will do our best, throughout your ownership experience, to ensure that
your provides you with many miles of enjoyable driving.
Enclosure
GM Recall: 18135
18135
General Motors
Product Field Action
Customer Reimbursement Request Form
This section to be completed by customer (please print)
Customer Name:
Street Address or P. O. Box Number:
City:
State:
Zip Code:
Daytime Telephone Number (include Area Code):
Evening Telephone Number (include Area Code):
Date Request Form and Supporting Documentation Submitted to Dealer:
Vehicle Identification Number of Involved Vehicle: _________________________________________
(17 Characters)
Mileage at Time of Repair: _______________________ Date of Repair: _______________________
Amount of Reimbursement Requested: $_______________________
THE FOLLOWING DOCUMENTATION MUST ACCOMPANY THIS REQUEST FORM.
Original or clear copy of all receipts, invoices and/or repair orders that show:
•
•
•
•
•
The name and address of the person who paid for the repair.
The Vehicle Identification Number (VIN) of the vehicle that was repaired.
Description of problem, the repair performed, date of repair and who performed the repair.
The total cost of the repair expense that is being requested.
Proof of payment for the repair in question and the date of payment.
My signature to this document attests that all attached documents are genuine and I request
reimbursement for the expense I incurred for the repair covered by this letter.
Customer's Signature:
Submit this request form and the required documents to your GM dealer for processing. All reasonable
and customary costs to correct the condition described in the letter that came with this form will be
considered for reimbursement. If your request is approved, you will receive a check from your dealer.
If your request is denied, you will receive a written explanation for the denial from your dealer. If your
request is incomplete, your dealer will advise you what documentation is needed to complete the
request and offer you the opportunity to resubmit the request when the missing documents are
available. If you have any questions about this process or have waited 30 or more days for a response
from your dealer, please contact the GM Customer Assistance Center at 1-800-204-0261.
This section to be completed by dealer (please print)
Bulletin No.: __________ Request Approved: ____ Date: ____________ Amount: $____________
Request Denied: ____ Date: ____________ Reviewed By: _________________________________
Reason: __________________________________________________________________________
If denied, please provide a copy of this form to the customer and retain original for your files
- [J2534 Pass-Thru Programmer] - TOPDON RLink J2534 is...
- [All-in-One OEM Reprogramming and Diagnostics] - When...
- [Tested, Trusted, and Proven for Accuracy] - TOPDON RLink...
- [One-Click Installation, Continuous Updates] - The exclusive...
- [Works with Windows Compatibility and OEM Software...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 18135 01
Replacement Service Bulletin Number:
MFR Communication Date: 2018-05-02
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: STEERING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Newly Added in 2026: 7 Reset Functions] The 2026 new version of the OBD2 scanner diagnostic tool CRP123X V3.0 Elite has new special functions for F.REE: Throttle Ad.aptation, Oil/SAS/BMS/Brake Reset, D-P.F Re.generation and ABS Service. Before you visit a mechanic, launch obd2 Scanner CRP123X Elite can perform a more in-depth diagnosis of the car system and provide accurate data within minutes. What's more, the list of compatible models has been expanded. Upgrading frequency is regular, occurring monthly even weekly.
- 🔥[FCA AutoAuth + CAN FD & DoIP] As an upgraded version of the LAUNCH CRP123X/CRP129X, FOXWELL NT614, and ANCEL FX2000, The Newest LAUNCH CRP123X V3.0 auto diagnostic scanner supports the following new protocols: CAN-FD for 2020 and newer G.M and Chrysler
models, as well as DoIP for V.olvo, Land Rover
/Jaguar
, and B.MW F/G chassis. With integrated AutoAuth, you can diagnose 2018 and newer FCA
cars equipped with S.GW. Note: CAN-FD and DoIP protocols require an additional obd2 cable. *Menus vary by make, model, and year of gasoline or diesel engine vehicle. Email us your VIN data. - 🔥[No extra software fee. Works on 90 vehicle brands.] Most OBD2 scanners work with vehicles manufactured after 2001. However, the LUNCH OBD2 scanner is compatible with OBDII-equipped vehicles built after 1996 and works with more than 90 vehicle brands. One-click lifetime updates over WIFI 2.4&5.0Ghz keep the car software current and ensure constant coverage additions, diagnose vehicles from 1996 to 2026 with a massive global database. Android 8.1 ensures lightning-fast boot-up and processing.
- [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X V3.0 to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership. Generate vehicle health reports with one click and share them via email over Wi-Fi to help avoid blind maintenance. And will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
- [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis(or 4-in-1 merged waveform graph),you can save, share, print, or email the overall inspection report for easier analysis.🔥Code Search,DTC Library provide massive information. Inbuilt “Feedback” module provides customized repair suggestions from our certified professionals.
- 【2026 Most-cost-effective LAUNCH Scanner】 LAUNCH X431 CRP919XBT, upgraded from CRP919X, includes a VCI for wireless data transmission (3Mbps max). ✅HARDWARE: MTK's chip + doubled memory & battery capacity ensure 5X faster & smoother navigation than OBD2 scanner diagnostic tools in the same category. ✅SOFTWARE: Its productive features (same as LAUNCH X431 scanners), 99% car coverage, more-frequent software renewals, field-tested accurate database, are superior to most competitors on market.
- 【FCA
AutoAuth + CANFD&DOIP】 LAUNCH X431 CRP919XBT uses a newly-developed wireless connector “DBSCar VII VCI” instead of a connection cable. You can be at workbench or any location around vehicle while running diagnostics. ✅With this VCI, this OBD2 scanner supports new protocols of tomorrow: CANFD for 2020-now GM&Chrysler
Models; DoIP for Volvo
, Land Rover
/Jaguar
, BMW
F/G Chassis. ✅And with integrated AutoAuth, you can diagnose 2018+ FCA
SGW-equipped cars without separate adapters. - 【ECU Coding & 35+ Reset Services】 For just 500 bucks you’ll get fully-featured ECU coding & resets/relearns from LAUNCH X431 CRP919XBT. 👍Online Code for VW
/Audi
/Skoda/Ford
/Lincoln
/Mazda
; 👍Open/close hidden functions; 👍Personalized modifications/changeover; 👍Shortcut to 35+ special functions like “Oil Reset/Brake Reset/Throttle Adaptation” etc., to quickly meet your daily repair needs. 🚩100+ more resets/relearns are under “car brand – system” waiting to explore. - 【All Brands All System Scan】 With a market focus, LAUNCH X431 CRP919XBT boasts a complete filed-tested database for your deeper dive into car's health to handle more complex repairs. Back up by leading LAUNCH technology, you can do all system coding/scans/read&clear codes/bidirectional control/resets covering 99% cars, unlike many scanners for cars on market (x-tool) with fake advertisement claiming to “do it all” but in reality, they ONLY work for certain cars with limited services.
- 【Bi-directional Control】This LAUNCH bidirectional scan tool CRP919XBT allows technicians to command specific vehicle components (like solenoids, relays) to monitor real-time working status, without using the vehicle controls. Achieve fast, accurate diagnostics and take control like never before. Turn on the radiator fan, modulate the throttle, open or close windows, operate mirrors, Injector Buz Test, turn on interior and exterior lights, sound horn, etc.
- 【Great Ideal For Every Car Owner】Prefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! Also, the lifetime update is provided for more vehicle coverage, bug fixes. SAVE AT LEAST $1000+ PER YEAR!Get LAUNCH CRP123 V2.0 car diagnostic scanner and give your lover a surprise!*R each us to Get the Extra Gifts :Protective Case Storage Bag.
- 【Newly Added 3 Reset Functions】CRP123 V2.0 obd2 scanner with upgrades it offers Throttle Adaptation,Oil Reset and SAS Reset functions for FREE now!! Optimize your engine performance with Throttle Adaptation, reset your oil life system with ease to save time and money on maintenance, and enhance your vehicle's handling and safety with SAS Reset.Covering more daily repairs,become the most cost-effective product in its price range,save your time and money!
- 【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 V2.0 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
- 【 Error Fault Code Reader】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and Vehicle Information, O2 Sensor Test, EVAP Test of Fuel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 v2.0 obd2 scanner can not only reveal what error codes your car is producing, but also erase your vehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
- 【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】Live Data Graphing,more intuitive to know your vehicle’s problem.4 inches Screen Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.
Last update on 2026-06-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




