NHTSA ID Number: 10135965
Manufacturer Communication Number: LI07.08-P-058759
TSB/Document Date: 2018-05-07
Summary
Fault codes for combustion misfiring shortly after cold start
Fault codes for combustion misfiring shortly after cold start
Topic number
LI07.08-P-058759
Version
2
Design group
07.08 Control modules
Date
05-13-2014
Validity
Model 222 and 166 with engine 278
Reason for change
sw update for 222 available
Reason for block
Complaint:
Engine diagnosis warning lamp (check engine light - CEL) lights up in instrument cluster.
Fault codes relating to combustion misfiring are logged in the fault memory of the engine control unit.
In rare cases the engine may be in a limp-home mode. Otherwise there are no other engine performance issues.
Cause:
Combustion misfire detection with unfavorable combination of combustion data assignments and component tolerances.
Remedy:
1. If other faults concerning the ignition, fuel supply or electrical and wiring harness contacts are present in addition to
the faults relating to combustion misfiring, then these must be processed first and general misfiring causes must be
considered as well.
2. Check the fault freeze frame data of the combustion misfires in relation to time of occurrence after engine start and
coolant temperature (injector performance data might be also used as a reference).
3. a) For model 222 with M278 engine MY 2014 vehicles only and if the time of occurrence is less than 120 seconds
after engine start and at the same time the coolant temperature is below 45°C, update the ME engine control module
software and both front door control modules - DCU-RF and DCU-LF with the newest software available (door control
modules might be updated automatically while ME is being updated).. Do not replace fuel injectors.
Note:
All available AddOns must be installed on the Xentry SDS.
b) For model 166 with M278 engine vehicles if the time of occurrence is less than 120 seconds after engine start and
at the same time the coolant temperature is below 45°C, replace the affected injector - the cylinder logging the misfire
fault.
Note:
A modified software release for the engine control unit to rectify the problem is currently being prepared for 166 model
vehicles. When the software is published via Xentry, it will no longer be necessary to replace injectors on model 166
vehicles.
This document will be updated again.
Symptoms
Power generation / Engine management / Engine management indicator lamp / Engine diagnosis / lit
Control unit/fault code
05-13-2014 5:25 PM
© Copyright Daimler AG
DOKONIE
Page 1/4
Control unit
Fault code
Fault text
ME - Motor electronics
P030884
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 8 has been detected. There is a
signal below the permissible limit value.
ME - Motor electronics
P030485
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 4 has been detected. There is a
signal above the permissible limit value.
ME - Motor electronics
P030085
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring has been detected. There is a signal above
the permissible limit value.
ME - Motor electronics
P030284
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 2 has been detected. There is a
signal below the permissible limit value.
ME - Motor electronics
P030584
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 5 has been detected. There is a
signal below the permissible limit value.
ME - Motor electronics
P030785
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 7 has been detected. There is a
signal above the permissible limit value.
ME - Motor electronics
P030700
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 7 has been detected. _
ME - Motor electronics
P030784
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 7 has been detected. There is a
signal below the permissible limit value.
ME - Motor electronics
P030185
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 1 has been detected. There is a
signal above the permissible limit value.
ME - Motor electronics
P030385
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 3 has been detected. There is a
signal above the permissible limit value.
ME - Motor electronics
P030600
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 6 has been detected. _
ME - Motor electronics
P030200
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 2 has been detected. _
ME - Motor electronics
P030400
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 4 has been detected. _
ME - Motor electronics
P030384
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 3 has been detected. There is a
signal below the permissible limit value.
ME - Motor electronics
P030500
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 5 has been detected. _
ME - Motor electronics
P030684
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 6 has been detected. There is a
signal below the permissible limit value.
05-13-2014 5:25 PM
© Copyright Daimler AG
DOKONIE
Page 2/4
ME - Motor electronics
P030685
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 6 has been detected. There is a
signal above the permissible limit value.
ME - Motor electronics
P030000
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring has been detected. _
ME - Motor electronics
P030100
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 1 has been detected. _
ME - Motor electronics
P030084
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring has been detected. There is a signal below
the permissible limit value.
ME - Motor electronics
P030285
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 2 has been detected. There is a
signal above the permissible limit value.
ME - Motor electronics
P030484
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 4 has been detected. There is a
signal below the permissible limit value.
ME - Motor electronics
P030885
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 8 has been detected. There is a
signal above the permissible limit value.
ME - Motor electronics
P030184
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 1 has been detected. There is a
signal below the permissible limit value.
ME - Motor electronics
P030800
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 8 has been detected. _
ME - Motor electronics
P030585
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 5 has been detected. There is a
signal above the permissible limit value.
ME - Motor electronics
P030300
'MED177' for combustion engine 'M276' (N3/10)
Combustion misfiring of cylinder 3 has been detected. _
Parts
Part number
ES1 ES2 Designation
Quantity Note
EPC Other
make
part
A 278 070 06 87
Injector
1
As required - model 166 vehicles only
X
A 276 072 01 43
Seal pack
1
As required - model 166 vehicles only
X
Validity
Vehicle
Engine
GL (166)
278
*
05-13-2014 5:25 PM
© Copyright Daimler AG
DOKONIE
Page 3/4
S (222)
278
*
Vehicle
Engine
166.872
278.928
722.909
166.872
278.928
725.031
166.872
278.928
725.032
166.872
278.928
725.033
166.873
278.928
722.909
166.873
278.928
725.031
166.873
278.928
725.032
166.873
278.928
725.033
222.082
278.929
722.909
222.082
278.929
725.011
222.085
278.929
722.967
222.085
278.929
725.041
222.182
278.929
722.909
222.182
278.929
725.011
222.185
278.929
722.967
222.185
278.929
725.041
Full model designation breakdown
05-13-2014 5:25 PM
© Copyright Daimler AG
DOKONIE
Page 4/4
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: LI07.08-P-058759
Replacement Service Bulletin Number:
MFR Communication Date: 2014-05-13
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs.
- 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 2026 Newest Wireless Bluetooth Scan Tool D1: OTOFIX D1 Diagnostic scanner is upgraded version with Enhanced Hardwares & Newest Functions, FASTER and SMARTER! ✅Alternative Bluetooth 5.0 +USB connect✅2G+64GB✅Android 9.0 OS✅5G & 2.4 GHz Dual WiFi✅5800mAh battery👍VAG Guided Function👍ECU Online Coding👍CANFD&DOIP👍40+ Services👍Bi-Directional Control👍Full Systems Diagnose👍2 Years Free Update👍150+ Vehicle Coverage🎁Contact to get gift: otofixaftersales-amz@ outlook.com
- ECU Coding to Unlock the Hidden Features: OTOFIX D1 obd2 scanner diagnostic tool newly adds ECU Coding which can Online Coding(ONLY for VW/Au.di/Sk0da), Variant Coding/Offline Programming, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, disbale auto start-stop, sunroof initialization, injector calibration, etc. PS: Coding functions vary by model&year.
- Full Bidirectional Control for Active Car Tests: The D1 OTOFIX scanner also offers bi-directional control, allowing you to perform powerful active tests on car subsystems. This means that you can check the working status and functionality of open & close solenoids, energize injectors, turn cooling fan on & off, and more, all from the device itself.🚩The D1 bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.**Note that Active Tests available depend on the make/model/year of your car.
- 40+ Popular Maintenance Functions: OTOFIX D1 obd scanner for car performs 40+ hot services, including Oil Reset, EPB, TPMS, BMS, E.GR, G.PF, D.PF, SAS Calibration, ABS Bleeding, Injector Coding, Gearbox Match, Suspension, Crankshaft Relearn, Power Balance, etc., still growing. Great choice for DIYers, technician, repair shop. 🚩Get MORE special functions from "Car Brand>System>Service". Check compatibility before purchase via 📧 otofixaftersales-amz@ outlook.com.
- OE-Level All Systems Diagnostic + One-Click AutoVIN & AutoSCAN: OTOFIX D1 scanner automotriz gives you the ability to troubleshoot entire car systems including engion system,transmission system,body system,chassis,etc. 🚩One of the standout features of the D1 obd2 scanner diagnostic tool is the one-click AutoVIN & AutoScan function. This feature allows you to quickly and easily scan all diagnosable ECUs with just one click, and identify any problems hidden in your vehicle's systems.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.