NHTSA ID Number: 10133825
Manufacturer Communication Number: T-SB-0017-13
TSB/Document Date: 2018-04-23
Summary
Some 2009 ? 2010 model year North American Production (NAP) Corolla vehicles may exhibit a condition where the holding performance of the trunk lid is unsatisfactory under certain limited conditions. Use the following bulletin to address this condition.
February 1, 2013
T-SB-0017-13
Trunk Lid Closing Under Certain Limited Conditions
Service
Category
Vehicle Exterior
Section
Door/Hatch
Market
USA
Applicability
YEAR(S)
MODEL(S)
2009 – 2010
Corolla
ADDITIONAL INFORMATION
SUPERSESSION NOTICE
The information contained in this bulletin supersedes SB No. T-SB-0281-10.
• The entire bulletin has been updated.
Service Bulletin No. T-SB-0281-10 is Obsolete and any printed versions should be discarded. Be
sure to review the entire content of this bulletin before proceeding.
Introduction
Some 2009 – 2010 model year North American Production (NAP) Corolla vehicles may exhibit a
condition where the holding performance of the trunk lid is unsatisfactory under certain limited
conditions. Use the following bulletin to address this condition.
Production Change Information
This bulletin applies to:
• ALL 2009 – 2010 model year NUMMI (WMI = 1NX) built vehicles.
• 2009 – 2010 model year TMMC (WMI = 2T1) built vehicles produced BEFORE the Production
Change Effective VINs shown below.
MODEL
PLANT
Corolla
TMMC
SPOILER
PRODUCTION CHANGE EFFECTIVE VIN
Yes
2T1B#4#E#AC529713
No
2T1B#4#E#AC488018
© 2013 Toyota
Motor Sales, USA
Page 1 of 12
February 1, 2013
T-SB-0017-13
Page 2 of 12
Trunk Lid Closing Under Certain Limited Conditions
Warranty Information
OP CODE
640101
TIME
DESCRIPTION
TYPE
OFP
T1
T2
Without Spoiler
64531-02210
64531-02211
64532-02200
64532-02201
9A
14
0.3
R & R Torsion Bar (Both)
With Spoiler
64532-02210
64532-02211
APPLICABLE WARRANTY
• This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for
36 months or 36,000 miles, whichever occurs first, from the vehicle’s in-service date.
• Warranty application is limited to occurrence of the specified condition described in this
bulletin.
Parts Information
TYPE
Without Spoiler
With Spoiler
PREVIOUS PART NUMBER
CURRENT PART NUMBER
PART NAME
QTY
64531-02210
64531-02211
64531-02213
Torsion Bar, RH
1
64532-02200
64532-02201
64532-02203
Torsion Bar, LH
1
64532-02210
64532-02211
64532-02213
Torsion Bar, LH
1
Required Tools & Equipment
SPECIAL SERVICE TOOLS (SST)
Luggage Compartment Tool Set*
* Essential SST.
NOTE
Additional SSTs may be ordered by calling 1-800-933-8335.
© 2013 Toyota Motor Sales, USA
PART NUMBER
QTY
09804-24010
1
T-SB-0017-13
February 1, 2013
Page 3 of 12
Trunk Lid Closing Under Certain Limited Conditions
Repair Procedure
Depending on vehicle equipment (with or without spoiler), the Repair Procedure is different.
Follow either Repair Procedure A or B as described below:
• Repair Procedure A (vehicles without spoiler): Replace BOTH LH and RH Torsion Bars.
• Repair Procedure B (vehicles with spoiler): Replace only LH torsion bar.
Repair Procedure A: Without Spoiler
Removal
1. Remove the left luggage door hinge Torsion Bar LH.
A. Disconnect the luggage door hinge Torsion
Bar LH from the luggage compartment door
torsion bar support.
Figure 1.
© 2013 Toyota Motor Sales, USA
February 1, 2013
T-SB-0017-13
Page 4 of 12
Trunk Lid Closing Under Certain Limited Conditions
Repair Procedure A: Without Spoiler (Continued)
Removal (Continued)
B. Using the SST, disconnect the left end of the
luggage door hinge Torsion Bar LH from the
luggage door hinge and the vehicle body.
Figure 2.
SST: 09804-24010
NOTE
If the SST is unavailable, the above
procedure can be performed without the
SST.
1
1
1
C. Disconnect the right end of the luggage door
hinge Torsion Bar LH and remove it from the
vehicle body.
SST
Figure 3.
© 2013 Toyota Motor Sales, USA
February 1, 2013
T-SB-0017-13
Page 5 of 12
Trunk Lid Closing Under Certain Limited Conditions
Repair Procedure A: Without Spoiler (Continued)
Removal (Continued)
2. Remove the right luggage door hinge Torsion Bar RH.
A. Disconnect the luggage door hinge Torsion
Bar RH from the luggage compartment door
torsion bar support.
Figure 4.
B. Using the SST, disconnect the right end of the
luggage door hinge Torsion Bar RH from the
luggage door hinge and the vehicle body.
Figure 5.
SST: 09804-24010
NOTE
If the SST is unavailable, the above
procedure can be performed without the
SST.
1
1
1
© 2013 Toyota Motor Sales, USA
SST
February 1, 2013
T-SB-0017-13
Page 6 of 12
Trunk Lid Closing Under Certain Limited Conditions
Repair Procedure A: Without Spoiler (Continued)
Removal (Continued)
C. Disconnect the left end of the luggage door
hinge Torsion Bar RH and remove it from the
vehicle body.
Figure 6.
Installation
HINT
• Install the right side first, then the left side.
• After installing each torsion bar, use your hand to open and close the luggage door. Make sure
that the luggage door can be opened and closed smoothly.
1. Install the NEW Torsion Bar RH.
NOTE
RH luggage door hinge torsion bars for NAP built vehicles are identified by a red identification
mark without a Rear Spoiler and by a yellow identification mark with a Rear Spoiler.
A. Connect the left end of the luggage door hinge
Torsion Bar RH to the vehicle body.
Figure 7.
© 2013 Toyota Motor Sales, USA
February 1, 2013
T-SB-0017-13
Page 7 of 12
Trunk Lid Closing Under Certain Limited Conditions
Repair Procedure A: Without Spoiler (Continued)
Installation (Continued)
B. Using the SST, connect the right end of the
luggage door hinge Torsion Bar RH to install
it on the vehicle body.
Figure 8.
SST: 09804-24010
NOTE
If the SST is unavailable, the above
procedure can be performed without the
SST.
1
1
1
C. Connect the luggage door hinge Torsion Bar
RH to the luggage compartment door torsion
bar support.
SST
Figure 9.
© 2013 Toyota Motor Sales, USA
February 1, 2013
T-SB-0017-13
Page 8 of 12
Trunk Lid Closing Under Certain Limited Conditions
Repair Procedure A: Without Spoiler (Continued)
Installation (Continued)
2. Install the luggage door hinge Torsion Bar LH.
NOTE
LH luggage door hinge torsion bars for NAP built vehicles are identified by a light blue
identification mark without a Rear Spoiler and by a white identification mark with a Rear Spoiler.
A. Connect the right end of the luggage door
hinge Torsion Bar LH to the vehicle body.
Figure 10.
© 2013 Toyota Motor Sales, USA
February 1, 2013
T-SB-0017-13
Page 9 of 12
Trunk Lid Closing Under Certain Limited Conditions
Repair Procedure A: Without Spoiler (Continued)
Installation (Continued)
B. Using the SST, connect the left end of the
luggage door hinge Torsion Bar LH to install
it on the vehicle body.
Figure 11.
SST: 09804-24010
NOTE
If the SST is unavailable, the above
procedure can be performed without the
SST.
1
1
1
C. Connect the luggage door hinge Torsion Bar
LH to the luggage compartment door torsion
bar support.
SST
Figure 12.
3. Open and close the trunk confirming proper operation.
© 2013 Toyota Motor Sales, USA
T-SB-0017-13
February 1, 2013
Page 10 of 12
Trunk Lid Closing Under Certain Limited Conditions
Repair Procedure B: With Spoiler
Removal
1. Remove the left luggage door hinge Torsion Bar LH.
A. Disconnect the luggage door hinge Torsion
Bar LH from the luggage compartment door
torsion bar support.
Figure 13.
B. Using the SST, disconnect the left end of the
luggage door hinge Torsion Bar LH from the
luggage door hinge and the vehicle body.
Figure 14.
SST: 09804-24010
NOTE
If the SST is unavailable, the above
procedure can be performed without the
SST.
1
1
1
© 2013 Toyota Motor Sales, USA
SST
February 1, 2013
T-SB-0017-13
Page 11 of 12
Trunk Lid Closing Under Certain Limited Conditions
Repair Procedure B: With Spoiler (Continued)
Removal (Continued)
C. Disconnect the right end of the luggage door
hinge Torsion Bar LH and remove it from the
vehicle body.
Figure 15.
Installation
HINT
After installing the torsion bar, use your hand to open and close the luggage door. Make sure that
the luggage door can be opened and closed smoothly.
1. Install the luggage door hinge Torsion Bar LH.
NOTE
LH luggage door hinge torsion bars for NAP built vehicles are identified by a light blue
identification mark without a Rear Spoiler and by a white identification mark with a Rear Spoiler.
A. Connect the right end of the luggage door
hinge Torsion Bar LH to the vehicle body.
Figure 16.
© 2013 Toyota Motor Sales, USA
February 1, 2013
T-SB-0017-13
Page 12 of 12
Trunk Lid Closing Under Certain Limited Conditions
Repair Procedure B: With Spoiler (Continued)
Installation (Continued)
B. Using the SST, connect the left end of the
luggage door hinge Torsion Bar LH to install
it on the vehicle body.
Figure 17.
SST: 09804-24010
NOTE
If the SST is unavailable, the above
procedure can be performed without the
SST.
1
1
1
C. Connect the luggage door hinge Torsion Bar
LH to the luggage compartment door torsion
bar support.
SST
Figure 18.
2. Open and close the trunk confirming proper operation.
© 2013 Toyota Motor Sales, USA
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: T-SB-0017-13
Replacement Service Bulletin Number:
MFR Communication Date: 2013-02-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS
, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.