Technical Service Bulletin

is,
S-SB-0011-14 April 29, 2014 wo Scion
2015 FR-S Pre-Delivery Service (PDS)
Service
Category General
Scion Supports EAS

Section Pre-Delivery Service Market USA ASE Certification’
Applicability

YEAR(S) MODEL(S) ADDITIONAL INFORMATION

2015 FR-S
Introduction

Pre-Delivery Service (PDS) is a critical step in satisfying your dealership’s new car customers.
Customer feedback indicates the following areas deserve special attention when performing PDS:

+ Careful inspection for paint chips/scratches and body dents/dings.

+ Proper operation of electrical accessories (including interior light, clock, and radio reset).
+ Interior cleanliness.

+ Proper function of mechanical systems.

Customer retention and proper maintenance of vehicles has been a major focus for Toyota and
Scion. To help remind customers that regular oil changes are essential fo the proper maintenance
of their vehicle, dealers are required to begin installing a first oil change reminder sticker prior to
delivery. By doing this, customers will be reminded to return to your dealership for their first oil
change. Your current oil change reminder sticker may be used, (See PDS Check Sheet item 9 of
“Final inspection & Cleaning.’)

A new PDS Check Sheet has been developed for the 2015 model year FR-S. Some check points
have been added, expanded or clarified. Bulletins are available for items in bold type.

Warranty Policy

the need Tor additional repairs or adjustment is noted during PDS, the required service

should be performed under warranty. Reimbursement will be managed under the
warranty policy.

The Warranty Policy and Procedures Manual requires that you maintain the completed PDS

check sheet in the customer’s file, If you cannot produce a completed form for each retailed
vehicle upon TMS and/or Region/Distributor audit, the PDS payment amount will be subject to debit.

An additional Repair Order completed in conjunction with normal PDS must have time punch/fiags
for service. lf multiple repairs are performed, separate time flags must be punched for each repair.

© 2014 Toyota Motor Sales, USA Page 1 of 6

Sscion $-SB-0011-14 April 29, 2014 Page 2 of 6

2015 FR-S Pre-Delivery Service (PDS)

Reimbursement Information

OP CODE DESCRIPTION TIME OFP "1 T2
001013 Pre-Delivery Service (PDS) 1.0 oS 5 So

Required Tools & Equipment

REQUIRED EQUIPMENT SUPPLIER PART NUMBER ary
Techstream 2.0* TS2UNIT
TIS Techstream ADE TSPKG1 4
Techstream Lite TSLITEDLRO1

* Essential SST.

NOTE
* Only ONE of the Techstream units listed above is required.

« Software version 9.00.026 or later is required.

+ Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE) at
1-800-368-6787.

Before Inspection
1. Install DCC Fuse ~ see check sheet

2. Connect Delivery Mode Wire Harness Connectors (Automatic Transmission ONLY) —
see check sheet

Functiona! Operation

Apply parking brake and cycle ignition “IG-ON,” place gear selector in reverse, turn on lights and rear
defogger. Unlock all doors, release fuel door, release trunk hatch.

1. Check dome, courtesy, map, and sun visor lights*
2. Check warning/indicator lights, gauges, and horn
3. Check windshield wipers and washers
4

. Check headlights, instrument lights, turn signals, dimmer switch, emergency flashers, and
brake lights

a

. Check inside/outside rear view mirror operation/adjustment
6. Check power outlet* and cigarette lighter

7. Check audio/navigation* systems, set SSP* to FR-S, and set clock

© 2014 Toyota Motor Sales, USA

Sscion — s-sB-0011-14 April 29, 2014 Page 3 of 6

2015 FR-S

Pre-Delivery Service (PDS)

Functional Operation (Continued)

8.

Install shift-tock override button cover*

Walkaround Inspection

Starting at the driver's door, check window and door lock operation and the operation of all power
windows and door locks from master switch. Assure tightness of interior garnishes and check seat
belts. Inspect hatch contents and lights at rear of vehicle. Inspect passenger door window regulator
and lock operation and garnishes. Check seat and seat belt operation. Continue on around to the
front of the vehicle checking lights.

i
2.

oO ON Oa be w

10.

Check Smart Key System* — S-SB-0006-14

Check door and door lock operation, including each wireless remote control/theft deterrent
system*

. Check power window operation

. Check that engine starts with all keys

. Check seats and seat belt operation

. Check rear defogger

. Check side marker, tail, backup, and license plate lights
. Check rear cargo area trim appearance

. Adjust compact spare tire pressure and check jack and tool installation

NOTE

Compact spare tire — 60 psi (414 kPa).

Check headlight aim

Refer to the Repair Manual for procedures.

. Check engine cil level

. Check brake and clutch* fluid levels

Visually inspect using see-through reservoirs.

. Check engine coolant level

. Check windshield washer fluid level

© 2014 Toyota Motor Sales, USA

Sscion S-SB-0011-14 April 29, 2014 Page 4 of 6

2015 FR-S Pre-Delivery Service (PDS)

Under Hood (Continued)

5.

6.

Check battery state-of-charge using Digital Battery System Analyzer

Refer to Service Bulletin No. PG001-06, “Battery Maintenance for In-Stock Vehicles &
Pre-Delivery.”

NOTE

Battery SOC should be a minimum of 75%. Please enter the SOC Reading on the space
provided on the check sheet and attach the printout to the check sheet.

Inspect for fuel, oil, coolant, and other fluid leaks

Under Vehicle (On Hoist)

1

Road Test

Remove disc brake anti-rust covers/anti-corrosion wheel film* — PD017-04

Visually inspect rotors for rust.

NOTE
For best rotor rust prevention, retain wheel film on vehicle until just prior to customer delivery.

. Activate the Tire Pressure Warning System (TPWS) sensors — see check sheet

Inspect tires for defects/damage

. Install rubber body plugs

Install the rubber plugs (stored in glove box) into rear torque box holes.

. Inspect for fuel, oil, coolant, and other fluid leaks
. Visually check bolts and nuts on chassis and powertrain for looseness

. Inspect under the vehicle for damage, rust, etc.

A complete road test helps assure customer satisfaction. Drive vehicle over a variety of road
surfaces and driving conditions. Check for unusual noise and driving performance.

1.

2.

Check cold engine operation

Check starting and fast idle operation performance.
Check engine operation during warm-up

Check that engine operates smoothly during warm-up.

Check for unusual noise, engine vibration, rough idle, etc.

© 2014 Toyota Motor Sales, USA

osSsciom S-SB-0011-14 April 29, 2014 Page 5 of 6

2015 FR-S Pre-Delivery Service (PDS)

Road Test (Continued)
3. Check engine at normal operating temperature

Check engine performance over a broad range of driving conditions, including idle quality,
acceleration, cruise, and deceleration.

4. Check clutch or automatic transmission operation
Check clutch operation, including engagement, disengagement, chattering, and unusual noise.
Check manual transmission operation, including shift lever/linkage and unusual noise.

Check automatic transmission operation, including operation in each range, neutral start switch,
and shift lock system.

5. Check brake and parking brake operation

Check brake function, including unusual noise, parking brake performance, and all related
brake system indicator lights.

6. Check steering operation and off-center/vehicle pull/flutter
Check steering function.
Check steering off-center/vehicle pull/flutter.
7. Inspect for abnormal noise and vibration
8. inspect for squeaks and rattles
9. Check heater and A/C operation
10. Check speedometer operation

11. Check cruise control operation

Final Inspection & Cleaning

1. Remove interior protective covers, unnecessary labels, tags, etc. (Remove protective covers
just before delivery to the customer)

Remove plastic covers from door panels, seats, head restraints, and sun visors, as required.

Remove labels, tags, and stickers (except those containing owner information).

NOTE

Consumer information labels, such as airbag information warning and bumper information
tabels, MUST be teft on the vehicle until delivery to a retail customer.

2. Verify floor mat application and install using retaining clips* — S-SB-0005-14

3. Visually inspect all interior parts for installation, damage, fit, dirt, etc.

© 2014 Toyota Motor Sales, USA