NHTSA ID Number: 10133511
Manufacturer Communication Number: A201789 2043758-
TSB/Document Date: 2018-04-16
Summary
This bulletin instructs the reader to diagnose issues with fuel pressure and to replace the fuel delivery unit with the new kit if the correct DTC and symptom code combination is present.
20 MIL on (DTC P310B - Low fuel pressure regulation / pressure out of specification)
20 17 89 2043758/5 May 24, 2017. Supersedes Technical Service Bulletin Group 20 number 16-76 dated August
18, 2016 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A4
2012 - 2016
All
2.0L and 3.0L engine
A6, A7,
2012 - 2018
All
2.0L and 3.0L engine
A5, A5
cabriolet,
Q5
2012 - 2017
All
2.0L and 3.0L engine
Condition
REVISION HISTORY
Revision
Date
Purpose
5
-
Revised header data (Added models)
Revised Warranty (Added time for installing fuel kit and for a Road Test.
Removed time for checking low pressure and fuel delivery rate)
Revised Service Solution (Updated procedure)
4
08/18/2016
Revised Warranty (Updated time for checking low fuel pressure and fuel
delivery rate)
3
08/02/2016
Revised Warranty (Added time for checking fuel pressure and delivery
rate)
MIL on.
Customer has problems starting the car.
The issue usually occurs when the temperature outside is around 105°F or higher, after start-stop journeys
with longer idle speed phases and a hot engine.
Technical Background
Vapors in fuel system.
Page 1 of 11
© 2017 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Production Solution
Not applicable.
Service
If DTC P310B (Low fuel pressure control, fuel pressure outside tolerance) stored in the engine control
module (ECM), J623 (address word 0001) with one of the following symptom codes:
Symptom code 6183 for 3.0 TFSI.
Symptom code 2636 and/or 2637 for 2.0 TFSI.
Intake air temperature is usually above 140°F (60°C) in the freeze frame data of the diagnostic log.
Proceed as follows:
1. Remove the fuel delivery unit according to the Repair Manual, Workshop Manual >> Engine >> Fuel
Supply Gasoline Engines >> 20 Fuel Supply >> Fuel Delivery Unit >> Fuel Delivery Unit Removing
and Installing.
Warning:
Danger due to escaping fuel. To prevent large quantities of fuel from leaking from the fuel delivery unit
when removing, the fuel tank may only be a maximum of ¼ full
2.
Install the kit in the fuel delivery module.
The repair kit for fuel delivery module has the
following parts:
Control Valve “A.” (Figure 1)
Control Valve “B” (Figure 2)
Hose (Figure 3)
Figure 1. Control Valve “A.”
Page 2 of 11
© 2017 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Figure 2. Control Valve “B.”
Figure 3. Hose.
Note:
There are 3 different designs for Control Valve Type B.
Type B1: Part has to be modified at the dealership (cut the red area described in the picture). Make
sure there is no plastic debris inside or outside the valve.
Type B2: no modification has to be performed, ready for installation.
Type B3: no modification has to be performed, ready for installation.
Page 3 of 11
© 2017 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Type: B1
Cut the area marked in red.
Figure 11. Cut the area marked in red.
Type: B2
No modifications are necessary.
Figure 12. Do not modify.
Page 4 of 11
© 2017 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Type: B3
No modifications are necessary.
Figure 13. Do not modify.
Follow the next steps to install the kit in the fuel delivery module:
2.1 With the fuel delivery unit outside the vehicle,
disconnect the main supply line (Figure 4).
Figure 4. Disconnect the main supply line.
2.2 Install the hose supplied in the kit according to the
picture below:
Figure 5. Install the hose.
Page 5 of 11
© 2017 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
2.3 Install Control Valve “B” in the marked area. Push it
until a ‘click’ noise is heard (Figure 6).
Figure 6. Install Control Valve “B”.
2.4 Control Valve “B” installation position (Figure 7).
Figure 7. Correct position for Control Valve
“B”.
2.5 Install Control Valve “A” as shown in the picture
(Figure 8).
Figure 8. Install Control Valve “A”.
Page 6 of 11
© 2017 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
2.6 Connect the remaining line to the Control Valve “B”
(Figure 9).
Figure 9. Connect remaining line.
2.7 Final installation position for Control Valve “B” (Figure
10).
Figure 10. Final position for Control Valve
“B.’
3.
Install the fuel delivery module in the vehicle according to Elsa at Repair Manual, Workshop Manual
>> Engine >> Fuel Supply Gasoline Engines >> 20 Fuel Supply >> Fuel Delivery Unit >> Fuel
Delivery Unit Removing and Installing.
4.
Start the vehicle.
5.
Check for leaks.
6.
Clear all DTC`s.
7.
Test drive the vehicle.
As a reference, find below videos with installation procedure for each type of vehicle.
Page 7 of 11
© 2017 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Before attempting the repair for the A6 and A7, please
review the video of the repair procedure: https://audiexternal.kzoplatform.com:443/swf/player/340 (Figure 13).
Figure 13. QR code for supporting video.
Before attempting the repair for the Q5, please review the
video of the repair procedure: https://audiexternal.kzoplatform.com:443/swf/player/338 (Figure 14).
Figure 14. QR code for supporting video.
Page 8 of 11
© 2017 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Before attempting the repair for the A4 and A5, please
review the video of the repair procedure: https://audiexternal.kzoplatform.com:443/swf/player/339 (Figure 15).
Figure 15. QR code for supporting video.
Note:
The procedure described above can be performed only with the DTC and symptom codes described
previously.
If DTC P310B is present with a different symptom code, proceed with normal diagnosis.
Warranty
Claim Type:
110 up to 48/50
G10 for CPO covered vehicles – verify owner
If vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number:
2066
Damage Code:
0040
Labor Operations:
For A4, A5, A5 cab,Q5:
Electric fuel pump remove
+ reinstall
2066 1900
130 TU
2066 1950
20 TU
For A6 and A7:
Electric fuel pump remove
+ reinstall
Page 9 of 11
© 2017 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Fuel drain + fill
2003 1700
110 TU
Install repair kit for fuel
delivery module
2066 9999
30 TU
GFF
0150 0000
Time stated on diagnostic
protocol
For all models:
Diagnostic Time:
(Max 30 TU)
Road test before service
procedure
No allowance
0 TU
Road test after service
procedure
0121 0004
10 TU
Technical diagnosis at dealer’s discretion
(Refer to Section 2.2.1.2 and Audi
Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2043758/5
All warranty claims submitted for payment must be in accordance with the Audi
Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi
Warranty.
Required Parts and Tools
Part Number
Part Description
Quantity
See ETKA
01
See ETKA
CAP ( if necessary only )
01
8K0298112G
Repair kit for fuel delivery module
01
Additional Information
All parts and service references provided in this TSB (2043758) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
©2017 Audi
of America, Inc. All rights reserved. Information contained in this document is based on the latest
information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in
Page 10 of 11
© 2017 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites without the prior expressed written permission of the publisher.
Page 11 of 11
© 2017 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
- Restores fuel economy
- Stabilizes ethanol
- Maximizes horsepower
- Improves responsiveness
- For use in both gasoline and diesel engines
- DESIGNED TO EXCEED EXPECTATIONS: Red Line complete SI-1 fuel...
- PERFORM AND PROTECT: Fuel additive cleans injectors...
- EFFICIENT FUEL BURN: Gas treatment that enhances gasoline...
- EASY TO USE: Use one bottle per tank for most effective...
- 15 Ounce (2 Pack)
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: A201789 2043758-
Replacement Service Bulletin Number:
MFR Communication Date: 2017-05-24
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: FUEL SYSTEM, GASOLINE:DELIVERY
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [2026 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide
- [TOPDON Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler
/Dodge
/Jeep
/Fiat
2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast. - [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
- Bi-Directional Control, Quickly Locate Problems: Turn your phone into a professional diagnostic tool. You can send commands from your phone to the ECU to test injectors, cooling fans, headlights, A/C clutch, windows, wipers, and more. See which one doesn't respond. Helps you quickly locate the problem and save time. No need to tear things apart, avoid blind disassembly.
- Flexible Subscription, Choose Advanced Features as Needed: TopScan Lite provides free-for-life access to core diagnostics, including full system scan, code reading, performance tests, and repair information. After purchase, advanced features (bi-directional control, service operations, live data, code clearing, and AI functions) are free-for-the-first-year. After the first year, if you want to use advanced features, you need to subscribe on a monthly, quarterly, or yearly basis. As new models and reset functions are updated, the tool will also be continuously upgraded.
- Full System Diagnostics, No Fault Hides: Unlike basic diagnostic tools that only cover 4 systems, TopScan can scan all systems. Read and clear trouble codes, view live data streams, and generate a complete vehicle health report – all issues are clear at a glance. Covers 10,000+ vehicle models and is compatible with 99.99% of vehicles.
- AI Assistant - TopFix: Think of TopFix as your personal AI mechanic. It leverages a repair database and OEM data to deliver clear, step-by-step repair solutions. Features include AI Q&A, one-click translation, and a full repair log, making your diagnostic process simpler and more efficient.
- 8+ Hot Resets, Keep Your Car in Top Shape: One-tap resets for oil, throttle, EPB, steering angle, DPF, ABS, BMS, and airbag. It enables car owners to easily perform essential maintenance, ensuring the vehicle stays in optimal condition and extends its service life.
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary
- Advaned ECU Coding: 10 of the most serviced brands in North America, including full ECU coding and flash hidden support for BMW
, VW
, Au-di, Benz, Porsche
, Toyota
, Ni ssan and more. Enables module replacement, feature customization, and personal settings with automatic backup or restore.Lets your shop safely offer high-margin customization services, attracting more customers and boosting profit
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




