2018

Q3
Audi Pre-Delivery Inspection
Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle

Vehicle Preparation

Trunk Inspection (continued)

 Check Elsa for open campaigns and updates

 Set spare tire pressure*

 Deactivate vehicle transport mode*
This step must be performed with the engine off, and ignition on

 Check battery clamps for proper torque*

 Deactivate air suspension loading mode (if equipped)*

 Verify operation of all seat belts and latches

 Set adaption channel to enable CD Ripping using Guided
Functions (if equipped with NAV)*

 Check operation of window, lock, and seat controls*

 Set service reminder*
 Perform any open campaigns*
Exterior
 Check all key buttons and features*
 Inspect exterior for damage, dings, dents and surface
scratches

Interior

 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights
 Verify operation heated seats (if equipped)
 Verify proper operation of climate control*
 Inspect operation of all power outlets*
 Check panoramic sunroof and sunshade operation*
 Verify the glove compartment opens and closes properly

Lighting and Windshield
 Test exterior lighting functions
 Test front washers (and headlight washers if equipped)*

 Verify operation of front Passenger Occupant Detection
System
Settings

Trunk Inspection

 Set Time source setting to “GPS” and set Auto daylight savings time to “on.”*

 Verify power tailgate is operational and set default opening
height*

 Set “Entertain. Fad.” in parking aid to an audible level

 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*

 Verify and set language and measurement units*

 Verify tool kit is installed securely in luggage compartment
Effective 11-1-2017-US
Version 1.2

 Set Time to “Automatic setting” and “automatic time zone”
 Verify Speech Dialog System is operating*
PRE-DELIVERY INSPECTION (PDI) | 1

2018

Q3
Audi Pre-Delivery Inspection
Settings (continued)

Driving Performance

 Set “Music volume while parking” to 6 lines*

 Check horn operation

 Set dealership location in navigation (if equipped)*

 Verify hold and release of electronic parking brake
 Verify engine performance and acceleration*

Media / Radio / SAT
 Verify operation of AMI or aux input (if equipped)

 Verify transmission operation, including shift paddles (if
equipped)

 Verify operation of CD/DVD player (if equipped)

 Test drive vehicle applying brakes several times*

 Insert SD card and test function of all slots

 Check steering/tire alignment

 Verify HD Radio is turned “off”(if equipped)*

 Check for squeaks, rattles and wind noise

 Verify operation of USB charge port

 Calibrate rear view mirror*
 Verify quality of radio reception in AM/FM/SiriusXM® bands

Audi connect® (USA ONLY) (if equipped)
 Connect the dealer demo SIM card to verify system connects
to mobile network*

Driver Assistance

 Verify Audi connect® Information Packet is present (if
equipped)*

 Verify Audi side assist functionality (if equipped)

 Verify all cruise control functions (if equipped)

 Turn on the Wi-Fi® hotspot (if equipped)*

 Verify operation of parking system (if equipped)*

 Check Wi-Fi® hotspot functionality (if equipped)*

 Activate NAV and follow directions back to dealership (if
equipped)

 Enable Google Earth

TM

(if equipped)*

Post-Road Test Inspection

On-Hoist Inspection

 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server

 Remove transport suspension blocks (follow ELSA instruction)
 Check steering, boots, brake system, hoses, tires and wheels
for damage

 Perform a battery test*
 Check Service Interval and verify correct interval is displayed

 Check underside of vehicle for fluid leaks and loose components

 Check engine oil level*

 Install wheel locks (if equipped)
 Install wheel bolt covers and center caps as supplied*

 Ensure the yellow tire pressure tag is installed on the steering wheel

 Inspect wheel bolts for proper torque*

 Apply Inventory Maintenance Sticker**

 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*

 Install showroom charger to ensure battery remains
charged at all times**

 Check all fluid levels and top off if necessary

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.

Technician Signature

Effective 11-1-2017-US
Version 1.2

Last 8 of VIN

Completion Date

PRE-DELIVERY INSPECTION (PDI) | 2