NHTSA ID Number: 10133266
Manufacturer Communication Number: AHW-17-17
TSB/Document Date: 2018-04-16
Summary
VAS 6154 Diagnostic Interface - Initial Setup Guide
Service Information
Diagnostic Device Hardware & Windows®
Number: AHW-17-17
Subject: VAS 6154 Diagnostic Interface – Initial Setup Guide
Date: Dec. 8, 2017
Supersedes VHW-17-09 due to *New Sections 2.6 & 4.0
Table of Contents
Page
Section
1.0
Introduction and Process Overviews
2
1.1
General Information
2
1.2
Web Interface – Overview
2
2.0
Initial Setup and Configuration
3
2.1
Preparation Prerequisites
3
2.2
Install Base Station Network Drivers
3
2.3
Prepare WLAN Module
4
2.4
Configure Web Interface Language
5
2.5
Unlock Communication Modes
6
2.6
Enable Roaming
6
2.7
Identify WLAN Module
7
2.8
Configure Connection Parameters
8
3.0
Setup USB Module
16
4.0
Add Static IP Address & Host Name to Interface Software
17
ATTENTIO N!
Personnel tasked w ith preparing V AS 6154 for w orkshop ser vice must have
know ledge of netw orking s ystems, and specific w orking know ledge of the
dealership L AN / WL AN, as w ell as any securit y restriction measur es in place
that could affect its access and use.
Page 1 of 19
© 2017 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
1.0 – Introduction and Process Overviews
1.1 – General Information
This document describes the initial setup and configuration of a new VAS 6154 prior to startup on a
diagnostic laptop or tablet device with ODIS Service diagnostic software.
1.2 – Web Interface – Overview
The initial setup configurations are performed with the VAS 6154 (and connected WLAN Module) plugged
in to the base station, which is connected to the diagnostic device. A network address entered into the web
browser on the diagnostic device generates a web interface in which the configurations are performed:
>>>>>>>>>>>>>>>>
VAS 6154 in Base Station
Diagnostic Device
Web Interface for Configurations
The configuration and information display layout on the VAS 6154 web interface is similar to ODIS Service.
• The Main Categories are listed
horizontally:
• Selecting a Main Category
reveals a number of
Subcategory menus
listed vertically in the left margin:
• The initial setup and configuration
instructions that follow will specify
a Main Category and an
applicable Subcategory with the
necessary instructions.
Page 2 of 19
© 2017 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.0 – Initial Setup and Configuration
2.1 – Preparation Prerequisites
ATTENTIO N!
Ensur e a successful setup by using the checklist and pr eparing accor dingl y!
Prerequisites
Person preparing VAS 6154 for service has knowledge of networking systems, and specific
working knowledge of the dealership LAN / WLAN.
Service Information document: VAS 6154 Diagnostic Interface – Introduction Guide read and
understood.
Dealership network performance recommended: 6 Mbps (single franchise) / 8 Mbps (dual franchise).
Diagnostic device operating system is known: Either Windows® 7 or Windows 10
VAS 6154 must be able to connect to the same Dealership WLAN as the diagnostic device.
WLAN must support WPA2 encryption. (It is not possible to connect to other types or open connections.)
Broadcast services are not blocked by a network firewall or other security measures.
The latest ODIS Service application version is installed on the diagnostic device.
Diagnostic device plugged in to power adapter and booted to Windows desktop.
Wireless switch on diagnostic device in ON position, (“Wireless LAN ON” & “802.11a Enabled”).
Diagnostic device connects to, and functions without restriction on dealership network.
2.2 – Install Base Station Network Drivers
1. Connect the double end of USB-Y cable to available USB ports on diagnostic device -1- , and then
connect the single end to base station -2- :
-2-
-12. Wait for Windows to locate and automatically install the drivers.
Windows 7: A confirmation window appears near the taskbar.
Windows 10: A very brief progress graphic appears in the taskbar.
Page 3 of 19
© 2017 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.3 – Prepare WLAN Module
1. Plug the WLAN Module into the end of the VAS 6154.
2. Plug the assembled unit into the base station as illustrated:
3. Open ODIS
4. ODIS should see the VAS6154 while it’s in the docking station. This will be evident by the Vehicle
and USB icons showing as below. You may need to click on Extras > Diagnostic Interface and
select the VAS 6154.
Note: If the VAS 6154 is new or there was a recent ODIS update, you may see a firmware update
window in the bottom right hand corner of the screen. It should take 3-5 minutes to complete. The
VAS 6154 will show disconnected in ODIS during some of this process, but will re-connect when
complete. Warning: Do NOT unplug the VAS 6154 from the docking station while the firmware
update is running.
Example of Firmware Update:
Note: If ODIS does NOT recognize the VAS 6154 when it’s docked, try the below steps before
contacting Diagnostic Software Support.
•
Click on Extras > Diagnostic Interface and re-select the VAS 6154
•
Remove and Re-insert the VAS 6154 into the docking station
•
Disconnect and Re-connect the VAS 6154 docking station USB cables from the laptops
docking station
•
If the VAS 6154 replaced a VAS 5054A, please ensure ODIS was re-installed and you
selected the VAS 6154 as the default Diagnostic Interface.
Page 4 of 19
© 2017 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.4 – Configure Web Interface Language
A one-time configuration is necessary to set the language displayed by the web interface.
1. Open Internet Explorer and manually enter the following IP address in the browser’s address bar:
http://192.168.1.69
(optional: http://vas6154-dock)
A delay before the web interface language selection appears is normal.
2. Select the desired interface language, scroll down and apply the selection by clicking the checkmark:
The General – System Information page appears first by default every subsequent time the web
interface is accessed:
Page 5 of 19
© 2017 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.5 – Unlock Communication Modes
The communication modes must be unlocked, and the country in which the network operates set.
1. From the web interface: Select the ADMINISTRATION main category, and then select the
Communication subcategory:
2. Check the Unlock WLAN access point mode AND Unlock WLAN infrastructure mode
selections -A-: (Click OK when the Access Point interference message appears.):
3. Select the applicable wireless channel selection - Country from the dropdown -B-:
4. Select Accept, and then wait a moment while the parameters are written:
A
B
2.6 – Enable Roaming
Roaming is helpful if you have multiple Wireless Access Points located through-out your dealership which
have the same SSID name. It allows the VAS6154 to automatically change to another WLAN access point
if the connection quality is poor.
Note: You should verify with your IT specialist if your network is configured in this manner.
1. Select the Administration main category then the Roaming subcategory.
2. Place a in the Activate Roaming Box.
3. Leave 15 as the default Roaming threshold (SNR).
4. For the List of channels (comma-separated). Leave this entry blank unless you consult with your IT
specialist.
Note: Within a large infrastructure it can be advantageous to narrow down the WLAN channels. Please
clarify with your IT specialist which channels are appropriate for your dealership.
(cont.)
Page 6 of 19
© 2017 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
5. Click Accept.
2.7 – Identify WLAN Module
If more than one VAS 6154 connects to the Dealership WLAN, each must be assigned a different name
and ID number.
1. Choose and record a unique name and two-digit ID number.
2. Carefully peel-off the self-adhesive numbers chosen for the
ID Number and apply them to the add-on WLAN Module
as illustrated (number shown is example only):
3. Select the GENERAL main category, and then select the Identification data subcategory:
4. If the display contains the WARNING: text illustrated below, select Train now:
Page 7 of 19
© 2017 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: AHW-17-17
Replacement Service Bulletin Number:
MFR Communication Date: 2017-12-08
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




