NHTSA ID Number: 10131613
Manufacturer Communication Number: TB-17-82-10
TSB/Document Date: 2018-04-02
Summary
Interior rear view mirror remedy Revised 2-15-18 (repost for bulletin naming convention correction )
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- 💝【Questions? We’re Here Anytime】MK808S is a...
- 🔥🔥🔥【2026 NEWLY RELEASED BI-DIRECTIONAL...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel...
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The...
- 【AUT0 SCAN & AUT0V1N, 10X FASTER】How much have you spent...
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: TB-17-82-10
Replacement Service Bulletin Number:
MFR Communication Date: 2018-02-16
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: VISIBILITY:REARVIEW MIRRORS/DEVICES:INTERIOR
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
Technical Service Bulletin
TB-17-82-10
MODEL: Karma
Revero
TITLE: Interior Rear View Mirror Vibration Remedy
DATE: June 2017
Revised: February 2018
PRIORITY: On Complaint
APPLICABILITY: MY17 and MY18 Revero
MARKET REGION: North America
PURPOSE: Interior Rear view mirror may have a vibration at certain frequency, bulletin procedure reme-
dies this for affected vehicles.
Prepare the vehicle for the procedure.
Cover the dash securely with a plastic sheet or a blanket to prevent any material coming in contact or
staining the interior. (fig.1)
fig.1
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 1 of 11
Revised: Ferbruay 2018
Technical Service Bulletin
TB-17-82-10
MODEL: Karma Revero
TITLE: Interior Rear View Mirror Vibration Remedy
DATE: June 2017
Revised: February 2018
The following equipment must be ready for the procedure:
•Torx Screw driver #20
•Masking tape
•Adhesive - Teroson - Teromix PU6700 with applicator tip (in service kit C161171100100)
•Dispenser tool (also from the service kit)
•Razor blade
•Latex or nitrile gloves
•Torque wrench
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 2 of 11
Revised: Ferbruay 2018
Technical Service Bulletin
TB-17-82-10
MODEL: Karma Revero
TITLE: Interior Rear View Mirror Vibration Remedy
DATE: June 2017
Revised: February 2018
Prepare the applicator
The plunger needs to be 1:1 ratio
Insert the adhesive tub with the label up as shown
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 3 of 11
Revised: Ferbruay 2018
Technical Service Bulletin
TB-17-82-10
MODEL: Karma Revero
TITLE: Interior Rear View Mirror Vibration Remedy
DATE: June 2017
Revised: February 2018
Remove the ADAS camera bezel, there are two parts.
1) The shroud behind the mirror stem (green), this pops off by applying small pressure to the base near
the stem. (fig.2a and fig.2b)
fig.2a
fig.2b
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 4 of 11
Revised: Ferbruay 2018
Technical Service Bulletin
TB-17-82-10
MODEL: Karma Revero
TITLE: Interior Rear View Mirror Vibration Remedy
DATE: June 2017
Revised: February 2018
2) Remove ADAS bezel cover (shown in pink for clarity, fig 3a). This will expose a screw that is used to
mount the rear view mirror onto the rear view mirror puck (fig 3b). Unscrew the mirror from the puck by
sliding it rearward.
fig.3a
fig.3b
Be careful as the bezel (fig.4a and fig.4b) is trapped by the mirror, and when the mirror is removed it
is tethered by the connector in the headliner. An assistant may be useful to keep this out of the way
during adhesive application.
fig.4a
fig.4b
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 5 of 11
Revised: Ferbruay 2018
Technical Service Bulletin
TB-17-82-10
MODEL: Karma Revero
TITLE: Interior Rear View Mirror Vibration Remedy
DATE: June 2017
Revised: February 2018
3)Disconnect the ADAS camera connector (fig. 5a and fig. 5b).
Tape this off to avoid adhesive contamination (fig5c)
fig.5a
fig.5b
fig.5c
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 6 of 11
Revised: Ferbruay 2018
Technical Service Bulletin
TB-17-82-10
MODEL: Karma Revero
TITLE: Interior Rear View Mirror Vibration Remedy
DATE: June 2017
Revised: February 2018
4)Tape off the mirror puck as indicated in (fig.6a and fig.6b) Blue masking tape is illustrated here.
fig.6a
fig.6b
The unmasked area will be filled with adhesive as indicated in (fig.6c)
fig.6c
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 7 of 11
Revised: Ferbruay 2018
Technical Service Bulletin
TB-17-82-10
MODEL: Karma Revero
TITLE: Interior Rear View Mirror Vibration Remedy
DATE: June 2017
Revised: February 2018
5) After taping is complete (fig.7a) Prepare the applicator and use a 1:1 plunger provided.
Begin adhesive application (fig.7b) by filling the prescribed area beginning at the glass painted surface,
layering the adhesive until it is flush with the mirror puck. (fig.7c with tape removed for clarity).
Adhesive should reach the base of the mirror puck as shown (fig.7d with tape removed for clarity).
fig.7a
fig.7b
fig.7c
fig.7D
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 8 of 11
Revised: Ferbruay 2018
Technical Service Bulletin
TB-17-82-10
MODEL: Karma Revero
TITLE: Interior Rear View Mirror Vibration Remedy
DATE: June 2017
Revised: February 2018
NOTE: Adhesive will begin to harden in minutes. It will set in two hours and fully cure in 24
hours. Removal of tape should be done after ten minutes but no later than 15 minutes, any
adhesive should be cleaned off immediately.
6) Smooth off the applied adhesive with a razor while still taped (fig. 8a).
Remove the tape no sooner than ten minutes and no later than 15 minutes to allow the adhesive to set
and cure (fig. 8b). The adhesive MUST be flush with the puck and under no circumstances be higher
(over-flush) than or pass the edges of the puck (LH and RH), as this will not allow the mirror to mount
properly.
fig.8a
fig.8b
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 9 of 11
Revised: Ferbruay 2018
Technical Service Bulletin
TB-17-82-10
MODEL: Karma Revero
TITLE: Interior Rear View Mirror Vibration Remedy
DATE: June 2017
Revised: February 2018
7) After curing, reassemble the mirror. (fig.9) Torque for set screw is 2.7 Nm (2.5 +/- 0.3Nm)
fig.9
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 10 of 11
Revised: Ferbruay 2018
Technical Service Bulletin
TB-17-82-10
MODEL: Karma Revero
TITLE: Interior Rear View Mirror Vibration Remedy
DATE: June 2017
Revised: February 2018
PARTS REQUIRED:
PART NUMBER
N/A
Description
N/A
SHOP SUPPLIES:
Description
N/A
SPECIAL TOOLS:
PART NUMBER
Description
C161171100100
Service Kit – Adhesive and Applicator
PART NUMBER
Description
C131166800100
Interior Rear view Mirror
CAUSAL PART:
LABOR CODES:
CODE
76-10-02-10
Description
TB-17-812-10 Mirror Vibration
Remedy
TIME
DEFECT CODE
0.6
76-10-02-27
SUBLET:
CODE
N/A
Description
AMOUNT
WARRANTY DISPOSITION: This repair is covered under the New Vehicle Limited Warranty, in effect
for five (5) years from the in-service date with no mileage limitation.
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 11 of 11
Revised: Ferbruay 2018
- WHY CHOOSE THE 2025 CR MAX -Upgrade the latest diagnostic capabilities for all vehicles after 1996: upgrade to 49+maintenance services; 46 extra specific functions; real all systems/all control modules diagnose; over 40K+ bidirectional actuation tests for diagnosing all control moduels of cars; Powerful full OBD2 Functions; built-in ECU Coding for BMW
/ Audi/ VW/ RollsRoyce; Fr ee V.A.G Guide Function; Battery retistration for new battery adaptation and more. It covers all vehicle diagnostic services and some special professional vehicle maintenance servces, assists you to do home DIY vehicle maintenance or car repair as a pro technician. - NEWEST IN INNOVATION FULL OBD2 SERVICES- iCarsoft auto car diagnostic scanner compatible with CAN-FD, CR MAX can do it all-reads and clears trouble codes, ALL SYSTEM DIAGNOSIS such as engine, transmission, ABS and airbag etc. CR MAX code reader for all cars can perform I/M Readiness, Live Data, Freeze Frame, Vehicle Information, Monitor Test, On-Board Monitor, E vap System Test,O2 Sensor Test,DTC Library Lookup,etc. (Warm Tips: If you car is after 2023,please contact us for compatibility; 3. It comes with 16PIN OBD2 diagnostic adapter, please check your car diagnostic socket if it is 16pin socket, if your car is 14pin diagnostic socket please contact us for the solution.)
- 49 RESET+ 46 SERVICES- Performs: Oil Reset, EPB,SAS,Throttle, D-P - F, Battery, ABS, Injector, TPMS, Suspension, AC, Head Lamp, Body Stablity, Engine, Tramsmission, Airbag, Seat, Door-Win-Roof, Fuel Pump, Door, E-G- R.+21 NEWEST SERVICES( Need update scanner)-AdBlue, Clutch, Crankshaft, High Voltage Battery, Cruise Control, NO xSensor, Rain Sensor, Stop And Start, Turbocharger, Head Up Display, Radar Camera, Vehicle Setup, Cyliner Misfire Check,Speedlimitassist, ControlUnitReset,OxygenSensor, Seatbelt. Extra 46+ extra services based on car brand.(Tips: Quantity of reset/ calibration fucitons are based on car system that your vehicle model has)
- REVOLUTIONARY 40000+BIDIRECTIONAL ACTIVE TESTS: Upgraded CR Max scanner equip with numberous of actuational test items for covering all available vehicle control modules, no longer only do simple light test or window test like other scanners, performs hardware modules test and software control modules test for checking car units or new updated control moduels work well or not after maintenance/ repair/ re-installation/ control system updated (Example for Benz- Roller Sun Blind test; Backup Camera test ;Self-test; EPB test; Transport Mode test;Boost Pressure Positioner test; Fuel Pump test; AND MORE!!).(Warm tip: The available test items are based on control modules your car has)
- ECU CODING+ BATTERY REGISTRATION- Powerful ECU Coding service for BMW/MINI/RollsRoyce / Audi/VW/Seat/Skoda/Bentley/Bugatti/Lamborghini, Improves Engine Power Performance and Optimizes Fuel Efficiency and Match New Hardware Unit to car and Customized a comfortable Driving Modes and Fixes & Updates Original Software Bug. The battery test function for checking car battery health, perform battery reset (BMS ) for replacing a damaged or aging car battery with a new one and register new battery to car ECU
- Scanner POR V2.0 with all obd2 services
- Do the scanning for engine
- Support OBDII/EOBD Ten Modes of Operation
- 【Designed for Most Mercedes-Benz, Sprinter and Smart from 1996-2023】As every car model of Benz has its-owned specific car system and ECUs, not all models are equipped with a complete vehicle ECU, which may cause the scanner to be unable to perform all listed reset services on some models, or even completely incompatible. Like For Sprinter's newer models, it support diagnostic functions only, lacking support for specialized service functions.. So please tell us the car's VIN and required service before purchase for compatibility check. You may also refer to the instructions in the eighth image of the main product photos to perform your inquiry.
- 【Up to 38 Reset Services】MB V3.0 2026 Version diagnostic tool performs Up to 38 maintenance services - Oil Rest , SAS, EPB, ETC, D-P-F, TPMS, ABS, Suspension, Air Conditioner, Head Lamp, Body Stability, Engine Control, Seat, Fuel Pump, Air-Filter, Engine Idle, Door, Im-mo-bilizer, Injector Coding, Transmission Control, Miscellaneous, Adblue, BMS, Cluth, Water Pump, NOxSensor, Rain/Light Sensor, Start/Stop, Radar/Camera, Cylinder Shutoff Test, Speed Limit Assist, Control Unit Reset, Oxygen Sensor, Seat Belt, Cruise Control System, Turbocharger, Crankshaft, Language Setting and etc. (Tips: Please update the software after receiving the product to obtain new service functions)
- 【OE-Level All System OBD2 Scanner】iCarsoft MB V3.0 (2026 Version) diagnostic scanner offers comprehensive OBDII services, allowing you to quickly scan all systems, including the Engine, ABS, SAS, SRS, TPMS, TCM, Fuel Pump System, ESP, EPB, EPS, Suspension, SCM, Adaptive Systems, and more. It supports functions such as reading and erasing codes, checking I/M readiness, viewing freeze frame data, performing O2 sensor tests, conducting on-board monitoring, testing the evap system, auto VIN retrieval, and reading both generic and specific codes, as well as DTCs and battery tests.
- 【Bidirectional Scan Tool】iCarsoft MB V3.0 (2026 Version) Bidirectional scanner supports activate or control a vehicle system or component, allows commanding cars’ modules and receiving info from the ECU to perform active tests on individual components, including EVAP/ABS Motor Pump/Windows/Sunroof and more, to pinpoint fault causes & resolve issues,and allows you to re-learn certain components after making repairs or replacement.
- 【Real Time Record & Graph View】iCarsoft MB V3.0 (2026 Version) can automatically record vehicle text history and identify vehicle information. Preserve real-time data information. View & Graph Live Data. Support Data Review and Print. Multi-language: English, German, Dutch, Spanish, French and so on. We promise to offer Lifetime updates (Lifetime free Update via PC), and confidence in products. We also provide 1 year warranty + extra lifetime hardware free repair if you need it in the future. We prioritize user experience & strive to meet your expectations. Please do feel free to reach out to us if you have any question or problem about the usage, our tech team will service you in time.
This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API