NHTSA ID Number: 10130808
Manufacturer Communication Number: IK0800080
TSB/Document Date: 2018-04-02
Summary
J1939 Data Link Troubleshooting
IK0800080 J1939 Data Link Troubleshooting
Page 1 of 20
Countries:
AUSTRALIA, BAHAMAS, BOLIVIA, BRAZIL, BELIZE,
CANADA, CHILE, TAIWAN, COLOMBIA, COSTA RICA,
DOMINICAN REPUBLIC, ECUADOR, EL SALVADOR,
TRINIDAD AND TOBAGO, UNITED STATES, URUGUAY,
VENEZUELA, MEXICO, ARUBA, NICARAGUA, PERU,
PUERTO RICO, Curaçao, GUAM, GUATEMALA, GUYANA,
HAITI, HONDURAS, JAMAICA, KOREA, SOUTH KOREA,
NEW ZEALAND, PANAMA, SOUTH AFRICA
Document
IK0800080
ID:
Availability: ISIS, Bus ISIS, FleetISIS, Body Builder, IsSIR
Revision: 28
Major
System:
ELECTRICAL SYSTEM
Created:
English
Last
2/12/2018
Modified:
Current
Language:
Other
Portuguese, Français, Español,
Languages:
Viewed:
Author:
8/22/2007
Charles
Schroeder
123213
Less Info
Coding Information
Hide Details
Copy Link
Copy Relative Link
Bookmark
Add to Favorites
Provide Feedback
View My Bookmarks
Helpful
Not Helpful
10759
7046
Title : J1939 Data Link Troubleshooting
Applies To : All Models with 250k Baud Data Link (Black 9-Pin Diagnostic Connector); Overview information for
500k Baud Data Link
Change Log
Dealers: Please refer to the change log text box below for recent changes to this article:
02/12/2018 ‐ Updated service parts information to include 3 pin and 2 pin terminating resistor part numbers, as well as mating connectors and terminals.
01/22/2018 ‐ Added link to IK1200921 for private data link troubleshooting based on dealer feedback
08/11/2017 ‐ Updated 500k Baud (Phase 2) Vehicle Architecture to show the Switch Pack(s) are part of the HMI data link backbone.
08/09/2017 ‐ Updated steps 12‐15 to clarify what resistance measurement is being referenced based on dealer feedback.
06/28/2017 ‐ Added graphic to Step 1 for power and ground at diagnostic 9‐Pin connector based on dealer feedback.
04/27/2017 ‐ Updated diagnostic software to Navistar
Engine Diagnostics™.
• This article is for general J1939 troubleshooting on 250k baud data link vehicles. They will have a black 9‐pin diagnostic connector. The
information provided applies to all models. Check the Fault Code Action Plan for the faults you are diagnosing, there may be model
specific FCAP diagnostic information available.
• You MUST review the "Service Information (Known Issues)" section of this iKNow article PRIOR to troubleshooting anything on the truck.
• IK1200921 ‐ ISX, N13, and N9 / N10 Aftertreatment Private Data Link Troubleshooting
Click Here for a printable PDF version of this article.
Table of Contents
Description
Service Part(s) Information
500k Baud (Phase 1) Vehicle
Architecture
Symptom(s)
Additional Resources
500k Baud (Phase 2) Vehicle
Architecture
Special Tool(s) or
Software
Connector Views
Diagnostic Steps
Service Information (Known
Issues)
Description
There are a few things that you need to understand before troubleshooting the 1939 data link.
1. First, the drivetrain J1939 data link, J1939 body builder data link, and J1939 engine data link are three completely separate data links.
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/1/2018
IK0800080 J1939 Data Link Troubleshooting
Page 2 of 20
◦ For specific examples of modules on each different data link Click Here
2. The different J1939 data links work the same way, but the wiring for them is not connected.
3. The troubleshooting below is geared towards the drive train J1939 data link, but the same principles apply to the body builder and engine
data link.
4. The J1939 data link consists of a twisted pair of yellow and green wires that all the modules on the truck use to communicate with each
other.
5. Two 120 ohm terminating resistors are wired in parallel on the data link. Total resistance on a properly working data link is 60 ohms.
6. When you are checking the data link, if the problem is not present, the data link will show good.
7. The J1939 data link may be referred to as data bus, or CAN as well.
8. A module is capable of being connected to the public and private data link, but the information remains separate.
◦ Example: The Body Controller communicates on the public drivetrain data link, but also has the private body builder data link wired
to it.
◦ Example: The EIM communicates on the drivetrain data link, but also communicates with the ECM and ACM on the engine private
data link.
The MaxxForce 7 TMV (Thermal Management Valve) is on the Public data link. This module will not show up on the sniffer.
The ECM Engine and Chassis connector's data link terminals are connected internally to the module.
E13 and C53 are internally connected. E14 and C54 are internally connected.
For Post‐2007 vehicle 1939 troubleshooting, click on the appropriate link below:
• The troubleshooting cards give a good overview of the data link. This will help show you the backbone of the data link (main data link
wiring between 1st terminating resistor to 2nd terminating resistor) and the stubs of the data link (wiring from the backbone to each
possible module)
Basic example of Public J1939 data link
• The J1939 Splice Adapters (1024, 1025, 1026) are part of the backbone of the data link (The backbone will come in on 2 terminals and
leave on 2 different terminals). The wiring from the connector to each module is a stub.
◦ HPV (medium duty) 1939 Troubleshooting Card
◦ CE / BE Bus 1939 Troubleshooting Card
◦ ProStar 1939 Troubleshooting Card
These cards are 11" x 17" so they may not print well on regular size paper.
There are the most current troubleshooting cards that are available for printing. For more information specific to ProStar and LoneStar refer to
the Data Link Service Procedure found in the 2010–2016 ProStar® Technician Manual 0000863170. If you wish to order the above cards, you
can order them through the Navistar Print Portal from the Service Portal ‐ Dealer Menu. The part numbers are:
Vehicle Model
Part Number
ProStar Card
S00153
DuraStar, TranStar & WorkStar Card
S00155
CE / BE Bus Card
S00154
( Back to Top )
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/1/2018
IK0800080 J1939 Data Link Troubleshooting
Page 3 of 20
Symptoms
Diagnostic Trouble Code(s) & Dashboard Indicator Light(s):
SPN
FMI
Module and Source Address (SA)
Description
PRO100 0
Synthetic Fault Code
ProStar/LoneStar J1939 Fault Code Combination
Occurred
PRO100 1
Synthetic Fault Code
ProStar/LoneStar J1939 Fault Code Combination
Occurred
GEN100 0
Synthetic Fault Code
A combination of J1939 Fault Codes Occurred
GEN100 1
Synthetic Fault Code
A combination of J1939 Fault Codes Occurred
GEN100 2
Synthetic Fault Code
A combination of J1939 Fault Codes Occurred
639
9
Body Controller (33)
Drivetrain message timeout
639
14
Body Controller (33)
Drivetrain message timeout
2000
19
Body Controller (33)
PTC1 (PGN 64892) not Received from Engine
2023
9
Body Controller (33)
EGC data link communication failure
2000
9
Gauge Cluster (23) / Body Controller (33) Loss of data link from the Engine Controller
2003
9
Gauge Cluster (23) / Body Controller (33) Loss of data link from the Transmission Controller
2011
9
Gauge Cluster (23) / Body Controller (33) Loss of data link from the ABS Controller
2023
14
Gauge Cluster (23)
Gauge cluster lost communication with the ESC
2023
14
Gauge Cluster (23)
Gauge cluster lost communication with the Engine
Controller
2033
9
Gauge Cluster (23)
Loss of data link from the ESC
560
19
Engine (0)
Transmission driveline engaged not detected on J1939
609
19
Engine (0)
ACM not detected on J1939
639
14
Engine (0)
J1939 data link error (ECM unable to transmit)
639
19
Engine (0)
J1939 data link error (ECM unable to transmit)
751
8,11 Transmission (3)
J1939 Shift Control Device
563
9,14 Transmission (3)
ABS CAN Message
639
2
Transmission (3)
J1939 Communication Link
639
14
Transmission (3)
J1939 Engine Message
639
2
Anti‐Lock Brake System (ABS) (11)
Drivetrain message timeout
639
12
Anti‐Lock Brake System (ABS) (11)
J1939 Serial Link
639
14
Anti‐Lock Brake System (ABS) (11)
Loss of Data Link from Engine Controller
2853
14
Primary Shifter (5)
Drivetrain message timeout
14
Headway Controller (Forward Radar)
(40)
Drivetrain message timeout
886
Customer Complaint(s):
•
•
•
•
Gauges inoperative (Constant or Intermittent)
Transmission will not go into gear
Warning Lights
Check Electrical Message
( Back to Top )
Special Tool(s) or Software
Tool Description
Tool Number
Comments
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/1/2018
IK0800080 J1939 Data Link Troubleshooting
INTUNE
EZ‐Tech Software
Helios
EZ‐Tech Software
Diamond Logic Builder (DLB)
EZ‐Tech Software
Navistar Engine Diagnostics™
EZ‐Tech Software
Page 4 of 20
Fluke DVOM
ZTSE4357
Digital Multimeter
Electrical Tester
ZTSE4858
180‐Pin Breakout Box
00‐00956‐08
Breakout box allows for testing engine control module and body
control module systems
Breakout Harness Kit
Multiple
Use breakout harness that is applicable to the system you are
testing
Terminal Test Kit
ZTSE4435C
Kit, Int. Elec. Eng. Terminal Test
Terminal Test Kit
77066‐nav
Hickok Break‐Out Tee Builder And Pin‐Out Tool
( Back to Top )
Diagnostic Steps
• The problem must be present when taking these readings!!
• If the problem is NOT present, the reading will be within spec every time!!
The diagnostic checks listed below can be performed at any module connector
• Making checks at each module connector can help isolate a voltage drop / increase in resistance / short to power or gound
• Use the worksheet below to identify which modules, connectors and terminals you have checked
Connector Terminal Worksheet
• This can also help identify if the J1939_High and J1939_Low wires are pinned incorrectly at a connector
• Due to the many configurations and options available, the terminating resistor can be found in multiple locations (250k only vehicles)
◦ Near the top of the transmission in the Powertrain Harness
◦ Left frame rail (could be as far forward as the steer tire in some applications) in the Center Chassis Harness
◦ Left frame rail (near the radiator bracket) in the Forward Chassis Harness (*if equipped with Forward Radar)
◦ Under the bunk in the sleeper (when factory pre‐wired for telematics)
◦ Near the ACM
• Be aware there are multiple data links on the truck. You must ensure the terminating resistor is part of the public drivetrain data link, and
not one of the private data links (body builder or engine/aftertreatment)
◦ For Engine Private Data Link Troubleshooting please reference IK1200921
Step
Action
Decision
Yes: Continue to Step 2
1
No: Verify proper power and ground to the 9‐pin ATA diagnostic
connector
• Install a comm. device (Nexiq USB, NavCom, NavLink) the
Power LED should be illuminated.
2
Is the Power LED illuminated?
• Install a scan tool.
• Turn the ignition key on, engine off (KOEO).
• Attempt to establish communication with INTUNE.
Yes: Obtain screen shot or record all modules. Continue to Step 3
No: Continue to Step 6
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/1/2018
IK0800080 J1939 Data Link Troubleshooting
Page 5 of 20
Are you able to communicate with any of the modules?
Note: Refer to IK0800351 to indentify the module to the source
address.
Yes:
3
• Evaluate modules detected on the sniffer.
Can you identify a module that is NOT communicating?
• Check the fuse for that module.
• Load test the battery power, ignition power, ground circuits
at the module connector.
• If ALL power and ground circuits test okay, test the data link
circuits at that module connector using the information
starting at Step 6.
• Repair wiring as needed to allow the module to communicate
on the data link and re‐test the system.
No: Continue to Step 4
4
• Check for Diagnostic Trouble Codes (DTCs)
Are communication DTCs present in any of the modules?
Yes: Obtain a screen shot of the DTCs in ALL modules (ECM, ABS,
TCM, BC, etc....). Continue to Step 5
No: Evaluate complaint to determine if a data link issue is present.
Determine if faults were previously cleared.
Yes:
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: IK0800080
Replacement Service Bulletin Number:
MFR Communication Date: 2018-02-12
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 2026 ALL-IN-ONE HEAVY DUTY TRUCK SCANNER – BUILT FOR DIESEL DIAGNOSTICS：The ANCEL X7HD PRO combines full-system diagnostics, bi-directional control, ECU coding, HDOBD/OBD2 functions, and 42+ reset services in one powerful heavy duty truck scanner. This diesel scan tool helps technicians, fleet owners, and repair shops diagnose problems faster, reduce downtime, and complete more repairs without switching between multiple truck diagnostic tools. Features a 10.1" Android tablet, Bluetooth & Wi-Fi, live data graphing, and 2 years of f-ree updates
- 42+ RESET FUNCTIONS – MORE THAN A BASIC TRUCK CODE READER：Perform essential service functions including forced DPF regeneration, injector coding, speed limiter adjustment, idle adjustment, oil reset, ABS reset, SRS reset, EPB reset, throttle reset, and suspension calibration. Designed for real truck maintenance and fleet service, this commercial truck diagnostic scanner helps reduce dealer visits, avoid unnecessary downtime, and handle more repair jobs with one diesel diagnostic tool
- ACTIVE TEST & ECU CODING – ADVANCED BIDIRECTIONAL SCAN TOOL FOR TRUCKS：Quickly locate faults by activating components and sending commands directly to vehicle systems. Test injectors, ABS, throttle, cooling systems, and other modules in real time without unnecessary disassembly. ECU coding and module matching help adapt replacement parts, restore factory settings, and reduce repeat repairs, making this semi truck scan tool ideal for advanced troubleshooting and daily shop work
- FULL-SYSTEM HDOBD/OBD2 DIAGNOSTICS – WIDE TRUCK & ENGINE COVERAGE：Read and clear codes, monitor live data, freeze frame, and diagnose engine, transmission, ABS, body, and other major systems. Compatible with Freightliner
, Kenworth, Peterbilt, Volvo, Mack, International, and other commercial truck brands, plus Cummins, Caterpillar, Detroit, Paccar, and Navistar diesel engines. Also supports full OBD2/EOBD diagnostics for standard vehicles, making it a versatile truck obd2 scanner for mixed fleets and repair shops - PROFESSIONAL HARDWARE + RELIABLE SUPPORT – BUILT FOR DAILY SHOP USE：This professional diesel diagnostic computer features a 10.1" touchscreen, Android 10.0 system, 6000mAh battery, Bluetooth/Wi-Fi connectivity, and built-in front & rear cameras for documenting repairs and remote troubleshooting. Includes 2 years of fr-ee updates, 1-year w-arranty, and responsive technical support. Contact [email protected] before purchase to confirm compatibility and supported functions for your truck or diesel engine
- 【Built for Heavy Duty Diesel Diagnostics】Designed for SAE J1939 and J1708 compliant trucks, buses, and diesel-powered commercial vehicles. HD601 truck scanner diagnostic tool helps owner-operators, small fleets, mobile technicians, and independent repair shops quickly identify fault codes, view live data, and make informed repair decisions—saving time, reducing downtime, and avoiding unnecessary shop visits
- 【Full System Diagnostics+All HD OBD Modes】The New HD601 heavy duty truck scanner delivers full-system diagnostics on SAE J1939 and J1708-compliant commercial vehicles—digging into engine, transmission, ABS, fuel, every system that keeps your rig rolling. It supports all HD OBD modes, giving you live data, freeze frame, ECU info, vehicle info, emissions data tracking, plus code reading and clearing. Not just what broke, but why—so you fix it right the first time. Pinpoint issues faster, cut repair costs, and spend less time on the shoulder
- 【Wide Heavy-Duty Vehicle Coverage】Supports a wide range of heavy-duty vehicle manufacturers and systems, including Freightliner, Kenworth, Peterbilt, Volvo, International, Detroit, Cummins, Paccar, Allison, Eaton, Bendix, Wabco, and more. Coverage varies by vehicle make, model, year, and system configuration. Contact our support team before purchase if compatibility verification is needed
- 【Speaks Major Truck Protocol】The New HD601 diesel truck scanner is built for American-made trucks—and supports the heavy‑duty protocols you' re most likely to run into on the road: SAE J1939, J1708/J1587, ISO 15765‑4, ISO 14230‑4, ISO 9141‑2, J1850 PWM/VPW, ISO 27145‑4, and EURO‑6. For most trucks, model years, and systems, it speaks the language your vehicle understands. Just plug it in and start diagnosing—no guesswork, no gatekeeping. Note: vehicle functions and module availability may vary by manufacturer and model year
- 【Save Hundreds on Diagnostic Fees】Why pay $150–300 for someone to read your codes? With the New ANCEL heavy duty truck scanner, you can pull fault codes yourself—in minutes, without leaving the truck. One or two uses pays for the tool. After that, every diagnostic is money back in your pocket. Smart investment for owner-operators, techs, and small fleets. Read and clear stored fault codes in minutes. Active fault codes may require repairs before they can be cleared
- 【One Tool, Total Fleet Coverage: 6/9/16 Pin Ready】Featuring an integrated 16-pin OBD2 connector and professional-grade 6-pin & 9-pin adapters, this heavy duty truck scanner provides extensive support for J1939, J1708, J1587, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 protocols. It offers reliable diagnostic coverage for major American diesel brands—including Cummins, Paccar, Caterpillar, Detroit, and Freightliner—making it a versatile semi truck scanner for managing any diverse fleet.
- 【2 in 1 Diesel Code Reader & Advanced HD OBDII】Equipped with professional-grade diesel scanner capabilities, the HD301 diesel scanner features intuitive Read/Erase codes and turn off the "Check Engine" light. With the built-in DTC Lookup library, you can instantly access fault code definitions on-device without searching the internet. It also retrieves hundreds of essential live sensor data—such as coolant temperature, fuel pressure, and engine RPM—in a stable text format for precise and rapid troubleshooting. (Please note that the HD301 can not support DPF Regen.)
- 【Full System Truck Diagnostic】The FOXWELL HD301 heavy duty scan tool is engineered to deeply access and scan all available electronic control modules specifically for truck, including Engine, Transmission, ABS, SRS, Chassis, and Body Control. This professional truck scanner diagnostic tool allows you to identify issues across the entire vehicle, ensuring your rig stays in peak condition for the long haul.
- 【Versatile for most big Rigs: Commercial, Passenger & Beyond】Engineered for more than just trucks, this heavy duty scan tool offers extensive coverage for pickups, buses, trailers, and even marine vessels. From construction machinery (excavators, loaders) to agricultural equipment (tractors, harvesters), it provides a true all-in-one diagnostic solution.
- 【Plug-and-Play & No Subscription】Designed for the road! No WiFi, no batteries, and no complex App setup required. Simply plug it into your vehicle’s diagnostic port to start scanning immediately. Enjoy lifetime free software updates to keep your HD301 diesel truck scanner current with the latest vehicle models and features—without any hidden subscription fees—While overcoming language barriers with support for Spanish and English.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.