NHTSA ID Number: 10130798
Manufacturer Communication Number: IK0800183
TSB/Document Date: 2018-04-02
Summary
Engine Sensor Harness Installation
IK0800183 MaxxForce 11 and 13 Engine Sensor Harness Installation
Page 1 of 13
CANADA, UNITED
STATES, PUERTO
RICO
Document
IK0800183
ID:
Availability:
Major
System:
Current
Language:
Other
Languages:
ISIS, FleetISIS
Revision:
3
ENGINES
Created:
5/27/2009
English
Last
Modified:
2/25/2014
Français, Español,
Author:
Jay
Weston
Viewed:
2751
Countries:
Less Info
Coding Information
Hide Details
Copy Link
Copy Relative
Link
Bookmark
Add to
Favorites
View My
Bookmarks
Provide
Feedback
Helpful
Not Helpful
293
503
Title : MaxxForce 11 and 13 Engine Sensor Harness Installation
Applies To : MaxxForce 11 and 13 Engines
DESCRIPTION
Below are the instructions for the Engine Sensor Harness Installation on MaxxForce 11 and 13
Engines.
SYMPTOMS
• Wiring will chafe if the harness is not routed and secured properly. This may cause intermittent electrical
short circuits and / or possible engine shutting down.
INSTALLATION
NOTE: As you are routing the engine sensor harness make sure all electrical connections are getting
connected to the sensors. Verify that the connectors are fully seated and latched by backing off the connector
fully before engaging on to the sensor. The connector should not have any movement in the body assembly
when fully latched to the sensor.
1. Remove old Engine Sensor Harness.
2. Install Large Zip ties in engine Harness Tray (See Figures 1-3)
3. Install sensor harness onto tray and make sure sensor harness is located correctly on tray (See Figure
4)
NOTE: Make sure the ECM connections are oriented in the correct position. Failure to perform this step will
cause the rest of the sensor harness to be out of position.
4. Install 21 pin connector (See Figure 5)
5. Position air lines and breather heater harness on top of engine sensor harness (See Figure 6)
6. Route air lines to air manifold and clip to 21 pin connector mounting bracket (See Figure 7)
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/5/2014
IK0800183 MaxxForce 11 and 13 Engine Sensor Harness Installation
Page 2 of 13
7. Position chassis harness and tie strap to sensor harness tray using the 3 tie straps that were installed in
step 2. (See Figure 8)
8. Route engine sensor harness along the front of the engine (See Figures 9 thru 12)
9. Route wiring along the right side of engine (See Figures 13 thru 19)
10. Route engine sensor harness to the back of engine and tie strap to chassis and air compressor air inlet
piping (See Figures 20 and 21)
11. Install ECM mounting bracket and ECM and clip harness (See Figure 22)
12. Connect Service Maxx and view / repair any active fault codes
13. Start truck build air pressure to 120 psi and then shut engine off.
14. Key on truck and using Service Maxx, perform an actuator test. Verify movement of Engine Retarder,
EGR Actuator, and Boost Control Actuator (wastegate).
15. Road test.
Figure 1
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/5/2014
IK0800183 MaxxForce 11 and 13 Engine Sensor Harness Installation
Page 3 of 13
Figure 2
Figure 3
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/5/2014
IK0800183 MaxxForce 11 and 13 Engine Sensor Harness Installation
Page 4 of 13
Figure 4
Figure 5
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/5/2014
IK0800183 MaxxForce 11 and 13 Engine Sensor Harness Installation
Page 5 of 13
Figure 6
Figure 7
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/5/2014
IK0800183 MaxxForce 11 and 13 Engine Sensor Harness Installation
Page 6 of 13
Figure 8
Figure 9
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/5/2014
IK0800183 MaxxForce 11 and 13 Engine Sensor Harness Installation
Page 7 of 13
Figure 10
Figure 11
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/5/2014
IK0800183 MaxxForce 11 and 13 Engine Sensor Harness Installation
Page 8 of 13
Figure 12
Figure 13
NOTE: The Coolant Flow Valve is no longer in used. The coolant control housing still has the flow valve
installed, but does not require any wiring to be routed/connected to the flow valve. The wiring has been
completely eliminated.
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/5/2014
IK0800183 MaxxForce 11 and 13 Engine Sensor Harness Installation
Page 9 of 13
Figure 14
Figure 15
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/5/2014
IK0800183 MaxxForce 11 and 13 Engine Sensor Harness Installation
Page 10 of 13
Figure 16
Figure 17
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/5/2014
IK0800183 MaxxForce 11 and 13 Engine Sensor Harness Installation
Page 11 of 13
Figure 18
Figure 19
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/5/2014
IK0800183 MaxxForce 11 and 13 Engine Sensor Harness Installation
Page 12 of 13
Figure 20
Figure 21
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/5/2014
IK0800183 MaxxForce 11 and 13 Engine Sensor Harness Installation
Page 13 of 13
Figure 22
Hide Details
Feedback Information
Viewed:
2750
Helpful:
293
Not Helpful: 503
No Feedback Found
Copyright © 2014 Navistar
, Inc.
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/5/2014
- 6X better wear protection on critical engine parts than...
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full...
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN...
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: IK0800183
Replacement Service Bulletin Number:
MFR Communication Date: 2014-02-25
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW, for Audi, for GM, for Ford and more. Note:D200 does‘t provide any OE software.
- 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- 【Professional Diagnostics】 The VD80 BT Lite bidirectional obd2 scanner is a professional OBD2 scanner diagnostic tool, delivering vehicle diagnostics right in your own garage. It supports 4,000+ active diagnostic tests, 28+ maintenance service functions, ECU coding, PMI calibration, brake service reset, and OEM-grade full-system vehicle scanning—perfect for DIYers and pros looking for powerful automotive tools. The available function tests vary by model—please to confirm compatibility.
- 【ADVANCED ECU CODE, CUSTOMIZE OE-SETTINGS】As a complete car code reader and reset tool, the VD80 BT Lite bidirectional obd2 scanner supports ECU coding for VW, for Audi, for BMW, for Benz, for Mitsubishi and more. PMI function for Ford/for Lincoln/for Mazda, supports copy data into new module. Step-by-step Guided Diagnostics makes complex jobs easier—making this one of the most reliable code readers & scan tools on the market.
- 【100000+ Vehicles Compatibility – CAN FD/DOIP】 VD80 BT Lite Auto Scanner Compatible with 100,000+ vehicles worldwide, this bidirectiona car scanner works with all OBD2-compliant vehicles manufactured after 1996, covering more than 100 brands worldwide. It also supports CAN FD, DOIP and FCA Secure Gateway protocols, boost 2X faster data transfer, covers 99% of U.S., EU and Asian cars. With 22 languages and 2 years of f*ree updates—future-proofing your car reader diagnostic for all cars.
- 【28+ Maintenance Services & Calibration Functions】VD80 BT Lite scanner for car Supports 28 maintenance services, including resetting oil and service lights after routine maintenance, registering new batteries for proper system operation, and clear clogged filters and restore performance. Additionally, it calibrates TPMS sensors after tire rotations, resets brake systems after pad replacements, relearns steering angle sensors after alignments, and more. These functions help your vehicle quickly and accurately return to peak performance—without the costly dealer visits.
- 【True Bidirectional Control – Diagnose with Confidence】Standing out with full-system coverage and extensive active test capabilities, the VD80 BT Lite bidirectional scan tool retrieves data from electronic control units and performs a wide range of active tests. You can real-time control over modules like fuel pumps, windows, A/C clutches, and relays. Perform 100+ advanced functions including throttle adaptation, injector coding, VIN write, idle relearn, and ABS bleed—helping you fix it right the first time with this all-in-one car diagnostic scanner.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.