IK0700097 - NEW Ultrasonic DEF Tank Sending Unit

Page 1 of 5

Countries:

CANADA, UNITED STATES

Availability:

ISIS, Bus ISIS, FleetISIS, IsSIR Revision:

Document ID: IK0700097

Major System:

EXHAUST

Created:

2
7/14/2017

Current Language: English

Last Modified: 2/9/2018

Other Languages: NONE

Author:

Viewed:

Keith Kierzek

16937
Less Info

Coding Information

Hide Details

Copy Link

Copy Relative Link

Bookmark

Add to Favorites

Print

View My Bookmarks

Provide Feedback

Helpful

Not Helpful

89

7

Title : NEW Ultrasonic DEF Tank Sending Unit
Applies To : All SCR Vehicles

CHANGE LOG
Please refer to the change log text box below for recent changes to this article:
02/09/2018 - Added part numbers and calibration IDs
11/02/2017 - Addressed feedback
09/15/2017 - Initial Article Release




DESCRIPTION
1. Overview
There is a NEW DEF tank sending unit available. This document will guide the user through the differences between the two styles, when to replace a sensor,
and what tools/kits are available when diagnostics lead to replacing the DEF tank sending unit.
The current style DEF tank sending unit has a float to measure the level and an LED to measure the DEF quality, shown in Image 1 and 2 below. The NEW
style DEF tank sending unit uses only ultrasonic waves to measure the level and DEF quality, shown in Image 3 below.

https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/1/2018

IK0700097 - NEW Ultrasonic DEF Tank Sending Unit

Figure 1: Float ONLY DEF Tank Sending
Unit (FLS)

Figure 2: Float and Optical DEF Tank Sending Unit
(QLS)

Page 2 of 5

Figure 3: Ultrasonic DEF Tank Sending Unit

2. Compatibility
The ultrasonic DEF tank sending unit is compatible with all vehicles built between 2012 and present using SCR. Since the concentration sensor was not
required until federal emissions 2016, vehicles built prior to 2016 will use a sensor without concentration functionality. This ultrasonic sensor will look identical
in appearance to its counterpart with added concentration functionality.

NOTE: If an ultrasonic DEF tank sending unit without concentration sensor functionality is installed on a
vehicle that requires the concentration sensor, fault codes will be present and the correct ultrasonic DEF
tank sending unit must be installed.
The ultrasonic DEF tank sending unit is only available for Cummins powered vehicles at this time. There are no calibration updates required to service the
sensor. Navistar powered vehicles will REQUIRE a calibration update to the ECM and ACM at the time the ultrasonic DEF tank sending unit is installed for
the first time.
1. Vehicles built from January 2016 to present with N9 or N10 engines will require an updated calibration. The last 4 digits of the calibration ID must be
NMR1, NMW1, or later.
2. Vehicles built before January 2016 with N9 or N10 engines will require an updated calibration.
3. Vehicles built from January 2016 to present with N13 engines will require an updated calibration. The last letter of the ACM calibration ID must be "C" or
later (eg. OYANDXC)
4. Vehicles built in 2015 with N13 engines will require an updated calibration. The last letter of the ACM calibration ID must be "C" or later (eg. OSANDXC)
5. Vehicles built before January 2015 with N13 engines will require an updated calibration. The calibration has not been released yet.
6. Vehicles built with A26 engines do NOT require an updated calibration. These engines were built with ultrasonic DEF tank sending unit compatibility.

NOTE: Both Optical and Ultrasonic DEF tank sending units will be available for service simultaneously.
Ultrasonic DEF tank sending units will replace the float and optical DEF tank sending units as inventory
diminishes. Some tank sizes will diminish inventory before others.

3. Ultrasonic DEF Tank Sending Unit Boot Encapsulation Slow to Fill Alert
The new ultrasonic DEF tank sending unit has a silicone boot encapsulation around the concentration sensor and the bottom of the level tube. The sensor is
suspectible to a delayed level reading due to the boot encapsulation which takes about five minutes to fill with DEF, but could take up to 15 minutes. Any time
a new ultrasonic DEF tank sending unit is installed, it should be dunked in the DEF 2­3 times at a rapid pace to initialize some flow of DEF through the boot
encapsulation. If any low DEF level fault codes are active after installation such as 1761­17, 1761­18, or 1761­1, the boot encapsulation must be cleared of
any air. Refer to the Repair Steps section for instructions to service the DEF tank sending unit. For new sensors experiencing interference issues, refer to
item 4. DEF Tank Cutting Tool.

If diesel fuel, oil, or coolant is ever found in the DEF tank, the sensor must be replaced.

4. Float and Optical DEF Tank Sending Unit Boot Kit
Some vehicles may experience aeration or other issues in which a float and optical sensor replacement is NOT required. For diagnostic procedures,
follow each associated FCAP. DEF sending unit boot kit instructions and supplemental diagnosc steps for "bubble codes" are located in iKNow article
IK0700096.

5. DEF Tank Cutting Tool for Interference Issues During Installation
If a float and optical DEF tank sending unit is replaced with an ultrasonic DEF sending unit, some units may experience interference when installing the
ultrasonic DEF sending unit in the tank. If any interference is witnessed, use the Ultrasonic Sensor Tank Cutting Tool. Refer to the Special Tools section to
find the tool part number and instructions.

NOTE: All 7 gallon sensors will likely experience interference when attempting to install
the ultrasonic sensor for the first time.

Do NOT remove the tie straps from the ultrasonic DEF tank sending unit. If the tie straps
are compromised, the ultrasonic DEF tank sending unit must be replaced.

https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/1/2018

IK0700097 - NEW Ultrasonic DEF Tank Sending Unit

Page 3 of 5

6. 5 and 15 Gallon DEF Line Interference
If a float and optical DEF tank sending unit is replaced with an ultrasonic DEF sending unit on 5 and 15 gallon tanks, the DEF lines MUST be replaced.
Without replacing the DEF lines, the DEF tank sending unit will not fit in its original location due to different DEF supply and return tube orientation. Refer to
the Service Parts Information section to find the 5 and 15 gallon ultrasonic sending unit kits.

SYMPTOM(s)
N/A

SPECIAL TOOL(s) / SOFTWARE
DEF TANK CUTTING TOOL
If a float and optical DEF sending unit is replaced with an ultrasonic DEF tank sending unit, some units may experience interference when installing the
ultrasonic DEF sending unit in the tank. Follow Step 1 below to determine if the DEF tank opening is large enough to support the ultrasonic DEF tank sending
unit.
Step 1. Measure the opening of the DEF tank. The opening should be at least 90 mm in diameter in any direction. If the DEF tank opening is not at least
90 mm, the Ultrasonic Sensor Cutting Tool should be used to cut the tank opening to a larger size. Refer to Table 1 below for DEF tank cutting tool part
number and instructions. The instructions are also included with the tool.

NOTE: All 7 gallon sensors will likely experience interference when attempting to install
the ultrasonic sensor for the first time.

Do NOT remove the tie straps from the ultrasonic DEF tank sending unit. If the tie straps
are compromised, the ultrasonic DEF tank sending unit must be replaced.

Table 1: DEF Tank Cutting Tool
Tool Description

Tool Number

Instructions

Ultrasonic Sensor Tank Cutting Tool

18­637­01

4328516R1

NOTE: Instructions are subject to revision, if printing discard after single use.

SERVICE PARTS INFORMATION
Ultrasonic DEF tank sending units will become available in PDCs as float and optical DEF tank sending units supply diminish. Therefore, some tank sizes will
become available before others. Refer to the overview in the Description section of this iKNow article to determine if this iKNow article applies.
DEF tank sending units must be ordered as critical unit down orders which requires a VIN to process the order. The part numbers for ultrasonic DEF tank
sending units are listed in Table 2 below.

Table 2: DEF Tank Sending Unit Part Numbers
Part Number

Emissions Year

Description

4097721C91

2016 to Present Federal Emissions Year

TANK, DEF, 5 GAL, HEAD UNIT, QLS

4097722C91

2016 to Present Federal Emissions Year

TANK, DEF, 7 GAL, HEAD UNIT, QLS

4097723C91

2016 to Present Federal Emissions Year

TANK, DEF, 9.5 GAL, HEAD UNIT, QLS

4097724C91

2016 to Present Federal Emissions Year

TANK, DEF, 12 GAL, HEAD UNIT, QLS

4097725C91

2016 to Present Federal Emissions Year

TANK, DEF, 15 GAL, HEAD UNIT, QLS

4097727C91

2016 to Present Federal Emissions Year

TANK, DEF, 16/23 GAL, HEAD UNIT, QLS

4097728C91

2017 to Present Federal Emission Year

TANK, DEF, 10.6/15.9/25.2 GAL TANK, HEAD UNIT, QLS

4099716C91

2013 to 2015 Federal Emissions Year

TANK, DEF, 9.5 GAL, HEAD UNIT, FLS

4099715C91

2013 to 2015 Federal Emissions Year

TANK, DEF, 7 GAL, HEAD UNIT, FLS

4099717C91

2013 to 2015 Federal Emissions Year

TANK, DEF, 16/23 GAL, HEAD UNIT, FLS

2518086C1

All ultrasonic DEF tank sending units

FILTER, SSI DEF SENSOR

https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/1/2018

IK0700097 - NEW Ultrasonic DEF Tank Sending Unit

2518087C1

All ultrasonic DEF tank sending units

Page 4 of 5

KIT, DEF SENSOR SEAL (SSI)

NOTE: Federal emissions year is located in Service Portal > Components for the
associated VIN.

5 AND 15 GALLON DEF LINE INTERFERENCE
If a float and optical DEF sending unit is replaced with an ultrasonic DEF sending unit on 5 and 15 gallon tanks, the DEF lines MUST be replaced. Without
replacing the DEF lines, the DEF sending unit will not fit in its original location due to different DEF supply and return tube orientation. Refer to Images 4 and
5 below to see the differences in DEF tube orientation.

Figure 4: DEF tube orientation of 5/15 gallon
float/optical sensor

Figure 5: DEF tube orientation of 5/15
gallon ultrasonic sensor

Table 3 below is the comprehensive list of kits that should be ordered for 5 and 15 gallon DEF tanks ONLY when converting from float and optical DEF tank
sending units to ultrasonic DEF tank sending units. Use the table appropriately to find the correct part number to order.

Table 3: 5 and 15 Gallon DEF Tank Sending Unit Kit Numbers
Kit Number

Emissions Year

Description

Additional Parts

2518077C92

2013-2016 Federal Emissions Year

KIT, 5 GAL DEF SENSOR (2013 EMISSIONS)
includes sensor, two DEF lines, and vent hose

No additional parts required

2518080C92

2013-2016 Federal Emissions Year

KIT, 15 GAL DEF SENSOR (2013 EMISSIONS)
includes sensor, two DEF lines, and vent hose

No additional parts required

2518078C92

2017 and beyond Federal Emissions Year

KIT, 5 GAL DEF SENSOR (2017 EMISSIONS)
includes sensor, one DEF line, and vent hose.
Additional DEF line is required to be ordered
separately.

2518081C92

2017 and beyond Federal Emissions Year

KIT, 15 GAL DEF SENSOR (2017 EMISSIONS)
includes sensor, one DEF line, and vent hose.
Additional DEF line is required to be ordered
separately.

•

For WorkStar vehicles, 4100837C1 must be ordered.

•

For DuraStar vehicles, 4079659C1 must be ordered.

•

For DuraStar vehicles with regular cab height,
4101350C1 must be ordered.

•

For DuraStar vehicles with low cab height, 4096172C1
must be ordered.

NOTE: Federal emissions year is located in Service Portal > Components for the
associated VIN.

Refer to Repair Steps section below for assembly instructions.

DIAGNOSTIC STEP(s)
When fault codes are present, refer to appropriate Fault Code Action Plan (FCAP) to locate proper repair guidlines.

REPAIR STEP(s)

https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/1/2018

IK0700097 - NEW Ultrasonic DEF Tank Sending Unit

Page 5 of 5

When servicing the ultrasonic DEF tank sending unit and DEF lines, refer to Exhaust Aftertreatment System with SCR EPA 10 Service Manual for proper
repair instructions. Use the proper torque sequence from Figure 6 and Table 4 below.

Figure 6: Ultrasonic DEF tank sending unit torque sequence
Table 4: Sensor Bolt Torque Sequence
Position

Torque (Nm) Cycle
Torque (Nm) Cycle 2
1

1

1-2

4-9

2

1-2

4-9

3

1-2

4-9

4

1-2

4-9

5

1-2

4-9

6

1-2

4-9

NOTE: Instructions are subject to revision, if printing discard after single use.

WARRANTY INFORMATION
Warranty Claim Coding:
Group: 18050 - SCR Aftertreatment
Noun: 124 - Sensor Assembly Def Tank

Standard Repair Time(s):
Refer to the SRT Manual for Repair Times

OTHER RESOURCES
Master Service Information Site

Hide Details

Feedback Information
Viewed:

16936

Helpful:

89

Not Helpful: 7

Staff
ID

Client
ID

Comments

Created
Date

You received the following feedback From: dy62401 - Timmothy Harper Email Address: [email protected] Job Classification: SE019, Service Training Coordinator Dealer: BEN
FUNK INC Feedback: I have truck Chassis# JL425843....The DEF lines that were supplied as per this Iknow article do NOT work for the set up on this truck. The DEF lines that it calls
2/20/2018
DY62401 for in the parts catalog for this VIN wont work either, since they are for the old style sending unit. I have ordered the 2017 emissions kit for a 5 gallon tank and the supplemental line that
2:51:50 PM
it calls for part# 4079659C1. There needs to be a 90 degree fitting on the end of both lines for this tank and there isn't! This will not work for this truck and I have no idea how to get the
parts needed for this set up. Please assist ASAP

Copyright © 2018 Navistar, Inc.

https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/1/2018