Switch on the ignition.

•

Open Offboard Diagnostic Information
System Service.

Page 9 of 21
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
•

Select “Diagnosis”.

•

Select “start self-diagnosis”.

Vehicle identification:
•

Choose the correct options and the
version of the vehicle, sedan or
wagon.

•

Select “Apply”.

•

Select “Self Test…”.

•

Select “diagnosis-capable systems”.

Page 10 of 21
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
•

Select “0013 – Distance Control
(ACC)”.

•

Select “0013 – Distance regulation
functions”.

•

Select “0013 – Calibration”.

•

Select “Attach to the test plan”.

•

Select “0013 – Calibration”.

•

Select “Perform test…”.

•

Select “Complete/Continue”.

Page 11 of 21
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
•

Select “Yes” to begin the Adaptive
Cruise Control auto calibration
procedure.

NOTE
ODIS will request the use of the
-VAS6430/10- reflector mirror. The
-VAS6430/3- reflector mirror in position #2
will also work for this procedure. Either
tool is acceptable for use.
•

Select “Complete/Continue”.

•

Select “Complete/Continue” if the
message “The calibration was
performed successfully” is displayed.

•

Select “Complete/Continue”.

•

If the ACC Sensor successfully
calibrates, this is the end of the
adjustment and calibration. Proceed
to page 16 of this document and
reinstall the ACC cover and remove
the rear wheel quick-action clamps.

•

Only continue to the next steps if the
ACC Auto calibration fails, or the
system is in need of further
measurement or adjustment.

Page 12 of 21
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
•

If calibration fails, do not repeat
calibration. Select “No”, and adjust the
sensor in the next steps.

If the ACC Auto calibration fails and further
adjustment is required:
•

Select “0013 – Distance regulation
functions”.

•

Select “0013 – Measuring values”.

•

Select “Attach to the test plan”.

•

Select “0013 – Measuring values”.

•

Select “Perform test…”.

•

Select “Complete/Continue”.

Page 13 of 21
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
•

Select the following from the
Measurement values selection table:

•

Misalignment angle, horiz

•

Vertical deadjustment

•

Performed adjustment

•

Check the Misalignment angle, horiz
Value in Range Between: -1.0 to 1.0

•

Check the Vertical deadjustment
value, In Range Between: 0.0 to 4.0.

•

Check Horizontal offset value, in
Range between: -1.0 to 1.0

•

Check the Vertical offset angle value,
In Range between: 0.0 to 4.0

•

If a value is not in range, continue to
the ACC Adjustment Procedure listed
in the next steps until all values are in
range, then run the ACC Auto
calibration again.

ACC Sensor Adjustment Procedure:
Switch the ignition Off
•

In case Horizontal deadjustment value
is lower than -1.0: Turn 1 time the
upper left screw clockwise using
the 3.5mm driver.

•

In case Horizontal deadjustment value
is higher than 1.0: Turn 1 time the
upper left screw counter
clockwise using the 3.5mm driver.

•

In case Vertical deadjustment value is
lower than 0.0: Turn 1 time the lower
right screw counter clockwise
using the 3.5mm driver.

•

In case Vertical deadjustment value is
higher than 4.0: Turn 1 time the lower
right screw clockwise using the
3.5mm driver.

•

Switch the ignition On.
Page 14 of 21

© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
NOTE
If additional adjustments are required after
the adjustment, follow the procedure listed
in the next three steps to quickly navigate
back to the Measuring values screen and
0013 Calibration screen.
TIP
Select “Diagnosis” from the ODIS home
screen. Proceed to the next step for a
shortcut to the Measuring values screen.

TIP
•

Right-Click on “0013 Adaptive
Cruise Control’.

•

When the next drop down menu
appears, select “Guided Functions”.

•

Select “Measuring values” from the
Guided Functions drop down box.

•

Follow the previous steps to perform
the Measurement values in this
document to read and adjust the
Measuring values readings.
Continue measurement/adjustment
until the values are within the listed
specifications.

TIP
•

When all Measuring values are
within specification, run the “0013
Calibration” routine to verify that the
ACC Sensor has accepted the
adjustments.

•

Select “0013 Calibration” from the
Guided Functions menu to initiate
the Auto Calibration procedure.

•

Repeat all the above procedures as
necessary until the ACC Sensor
successfully completes the 0013
Calibration routine.

Page 15 of 21
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
To Complete the Test:
•

Click “Control modules“

•

Click “X Diagnosis“

•

Click “Yes”

•

End of test

•

Make sure that the ACC DTC memory
is erased. Send the Diagnostic
protocol online.

•

Reinstall the ACC radar sensor cover
.

•

Remove the quick-action clamps (or
equivalent) from the rear wheels.

•

The calibration procedure is now
complete.

Page 16 of 21
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
Warranty
Claim Entry
Procedure

Enter your claim immediately upon completion of the UPDATE. Claims will only be paid
for vehicles that show this UPDATE code open in Elsa on the day of repair. To help
ensure prompt and proper payment, attach the screen print to the repair order.

Claim Help

U.S. dealers - Contact the Warranty Helpline toll-free at 1-866-306-8447 for help with
claim entry.
Canadian dealers - Contact your Warranty Campaign Specialist. For contact
information, please proceed to “ServiceNet – Warranty/Contact Information/Campaigns
– “Warranty Campaign Specialist.”

Required Customer Ensure customers are aware of all work performed on the vehicle by recording the
Notification
information on the repair order.
Attach a copy of the Vehicle UPDATE Fact Sheet to the customer’s copy of the repair
order and take the time to explain this UPDATE to your customer.

Page 17 of 21
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
Claim Entry Instructions
After UPDATE has been completed, enter claim as soon as possible to help prevent work from being
duplicated elsewhere. Attach the Elsa screen print showing action open on the day of repair to the
repair order.
If customer refused campaign work or vehicle is out of the specified warranty parameter for this Update:
 U.S. dealers: Submit request via WISE under the Campaigns/Update/Recall Closure option.
 Canada dealers: Fax repair order to Warranty at (905) 428-4811.
Service Number

91P3

Damage Code

0099

Parts Vendor Code
Claim Type

WWO
Sold vehicle: 7 10
Unsold vehicle: 7 90

Causal Indicator
Vehicle Wash/Loaner

Mark Labor as causal part
Do not claim wash/loaner under this action

Criteria I.D.

01

Inspect, align, and calibrate the Adaptive Cruise Control Radar Sensor.

Labor operation:

9163 24 99

Time stated on diagnostic protocol
(max 60 TU)

.

Page 18 of 21
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
Required Tools
ACC Adjustment Device -VAS6430-

Setting Device - Basic Set -VAS6430/1- or
Setting Device - Basic Set -VAS6430/1A-

ACC Reflector Mirror - Audi -VAS6430/3OR
ACC Reflector Mirror - Audi -VAS6430/10-

Page 19 of 21
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
Wheel Alignment Computer

-VAS6150A- Vehicle Diagnostic Tester

Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or
removal. Always check Elsa for the most current version of this document.

Page 20 of 21
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
UPDATE FACT SHEET – UPDATE Code 91P3
Dear Volkswagen Customer,
Today we performed UPDATE code 91P3 on your vehicle. This UPDATE was to inspect and
recalibrate the Adaptive Cruise Control Radar Sensor, and was performed for you free of
charge.
Volkswagen periodically makes updates like this available in order to ensure our customer’s
continued satisfaction with the quality of their Volkswagen vehicles.
We at Volkswagen are committed to providing our customers with reliable, quality products
that are a pleasure to drive and own. If you should ever have any questions or vehicle
concerns, your authorized Volkswagen dealer will be pleased to assist you.
Thank you for driving a Volkswagen!