NHTSA ID Number: 10130129
Manufacturer Communication Number: V601608 2045403
TSB/Document Date: 2018-03-13
Summary
To clairify title and applicable affected models.
Technical Bulletin
Model(s)
Year
Eng. Code
Trans. Code
VIN Range From
VIN Range To
Golf, Golf GTI
2015
All
All
AU_FM082335
AU_FM500000
Golf, Golf GTI
2016
All
All
AU_GM000001
AU_GM500000
Golf, Golf GTI
2017
All
All
AU_HM000001
AU_HM020000
Condition
60 16 08 November 22, 2016 2045403 Supersedes Technical Bulletin V601606 dated September 28, 2016 due
to updated title with applicable model clarification.
Water leak from the Sunroof (Panoramic Roof)
Note:
This bulletin must be read in its entirety before beginning repair.
This bulletin is applicable ONLY for Golf and GTI model vehicles equipped with a sunroof. Golf
Sportwagen and Alltrack are not affected.
Verify the customer complaint. Water leaks occur near the A-Pillars in the corners of the sunroof water channel.
Figure 1 (Water leaking through corner of water channel)
Remove the wind deflector, inner sunroof seal and thoroughly clean the water channel with isopropyl alcohol, a
microfiber cloth and compressed air prior to inspecting for cracks.
Page 1 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Inspect the sunroof water channel for stress cracks (see figure 2). There are a total of 8 areas to inspect for
cracks which are outlined in Figure 3 below. (More than 1 crack may be found).
Figure 2 (Examples of stress cracks in water channel)
Figure 3 (Inspections zones for stress cracks / application zones and sequence for foil application)
Technical Background
A difference in the expansion rate between the plastic water channel and steel reinforcement plates may cause
stress cracks to occur at the edges of the reinforcement plates.
Production Solution
Updated parts in production as of VIN AU_HM012965.
Page 2 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Service
Install Sunroof Water Channel Repair Kit
1. Move the front seats forward and tilt the seat backs forward to allow room to work on the roof by standing
through the sunroof opening from the rear of the vehicle (See Figure 4).
Note:
Care must be taken not to damage center console by kneeling or leaning against it during repair process.
Figure 4
Page 3 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
2. Remove the inner sunroof seal from around the front of the sunroof opening and lay it back over the sunroof
glass (See figures 5 and 6).
Tip:
Masking tape can be used to hold the seal in place on top of the sunroof glass for the duration of the repair.
Figure 5 (Inner Sunroof Seal)
Figure 6 (Inner sunroof seal draped over sunroof glass)
3. Remove the wind deflector according to the repair manual in ELSA.
Page 4 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
4. Thoroughly clean the water channel with isopropyl alcohol, a microfiber cloth and compressed air. Use a bone
tool or the squeegee supplied with the repair kit to clean the area underneath the sunroof trim panel by pushing
the cloth underneath the trim (See Figure 7).
Note:
Any dirt or debris will prevent the repair from being performed properly.
Figure 7
5. Wait at least 10 minutes after cleaning the water channel before proceeding to allow alcohol to evaporate.
6. Use masking tape to lift and compress the outer sunroof seal to provide additional access to the water channel
underneath the sunroof trim panel (See Figures 8 and 9).
Figures 8 and 9
Page 5 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
7. For all cracks, put a 1 mm bead of sealant (Teroson MS-930, part number D 172090A2) over any existing
cracks, 1 at a time. Start the sealant bead as far under the sunroof trim as possible and pull the bead to the end
of the crack.
Note:
The nozzle supplied with the sealant is already cut to a 1 mm opening.
Only work on 1 crack at a time due to the short cure time of the sealant.
Figures 10 and 11 (Sealant application)
8. Using the squeegee supplied with the repair kit, spread the sealant pushing it underneath the trim panel from
the inside edge of the roof opening to completely cover the crack.
Page 6 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
9. Remove all excess sealant from the water channel. There must not be any excess sealant that may prevent the
foils from being applied completely flat to the water channel. The crack should be filled with sealant with no
excess sealant around the crack (See figures 12 and 13).
Tip:
Cleaning solution (part number D 00940104) can be used to remove any sealant smears in the surrounding
areas.
Figures 12 and 13 (Spread sealant working from sunroof opening to underneath the trim panel. Sealant should
fill crack and there should be no excess sealant on the water channel.)
10. Repeat process for all cracks in frame.
11. Wait 30 minutes for sealant to cure before applying the foils to the water channel.
Page 7 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
12. Apply the foil tapes one at a time according to the sequence shown in Figure 14.
Note:
Foil tapes must be applied in all 8 positions regardless if there is a crack or not.
Tip:
For foil positions 2 and 4, it is more important to apply the foil as far underneath the trim panel as possible then
attempting to align the foil with the seal channel. Foil positions 3 and 4 should not overlap each other. DO NOT
cover the water drain hole or the witness line around the water drain with the foil in positions 3 or 4 (See Figure
15).
Figure 14 Foil application sequence (Both sides of water channel).
Page 8 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Figure 15 Drain hole and witness line.
13. Starting in position 1, peel half of the backing tape off the foil and fold it over to use to hold the foil during
application. Align the foil with the inner edge of the water channel and apply the foil, working it forward using the
included squeegee to ensure there are no air bubbles, wrinkles and that there are no gaps under the foil. Peel
backing tape off as you work forward. Use the squeegee to work the tape down as smooth as possible.
Note:
Position 1 is required solely for reinforcement of the water channel.
Figure 16 Peel half of backing tape off foil and fold in half to use to hold the foil as it is applied.
Page 9 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Tip:
There may be a burr on the water channel in this location that appears to be an air bubble. This is normal and an
acceptable condition after applying the foil (Figure 17).
Tip:
The foil positions are designed to cover witness lines in the water channel. It is normal to see a line in the foil after
it is applied.
Figure 17 Burr under foil position 1.
Page 10 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
14. In position 2, peel half of the backing tape off the section of foil to be placed underneath the trim panel and
fold it over to use to hold the foil during application. Ensure the tape is as far underneath the trim panel as
possible before beginning to adhere it to the water channel. Apply the foil working it toward the rear using the
included squeegee to ensure there are no air bubbles or wrinkles and that there are no gaps under the foil. Peel
backing tape off as you work. Use the squeegee to work the tape down smooth and as far underneath the trim
panel as possible (Figure 18).
Figure 18 Foil positions 1 and 2 fully applied.
15. In position 3, peel half of the backing tape off starting at the pointed edge in the radius and fold it over to use
to hold the foil during application. Carefully align the radius of the foil to the radius of the seal channel and ensure
the drain hole and witness mark around the drain will not be covered. Apply the foil working it forward using the
included squeegee to ensure there are no air bubbles or wrinkles and that there are no gaps under the foil. Peel
backing tape off as you work. Use the squeegee to work the tape down smooth and as far underneath the trim
panel as possible (Figure 19).
Page 11 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Figure 19 Foil position 3 fully applied.
Figure 20 Foil position 3 incorrectly applied covering witness line around drain.
Tip:
Foil position 4 is the most difficult position to install. The foil must not overlap the foil in position 3, it must not
cover the witness line around the drain, and it is difficult to place under the trim due to the limited work space.
This position is very easily folded over due to this.
Page 12 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
16. In position 4, peel half of the backing tape off the section of foil to be placed underneath the trim panel and
fold it over to use to hold the foil during application. Use a pivoting motion to swing the foil underneath the trim.
Ensure the tape is as far underneath the trim panel as possible before beginning to adhere it to the water
channel. Apply the foil working it from underneath the trim toward the sunroof opening. Use the included
squeegee to ensure there are no air bubbles or wrinkles and that there are no gaps under the foil. Peel backing
tape off as you work. Use the squeegee to work the tape down smooth and as far underneath the trim panel as
possible (Figures 21 and 22).
1.
3.
2.
4.
Figure 21 Use a pivoting motion to work foil underneath trim panel in position 4.
Page 13 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Figure 22 Foil position 4 fully applied.
Tip:
It is more important that the foil in position 4 be applied as far underneath the trim panel as possible versus
attempting to align it to the edge of the seal channel.
17. After all four foils have been applied to one side of the water channel, repeat steps 12-16 on the opposite
corner of the water channel.
Page 14 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
18. Once all 8 foils have been applied to the water channel, inspect the foils to ensure they are completely flat to
the water channel and that there are no air bubbles or gaps underneath the foil. Use the squeegee to help push
out any defects (Figures 23 and 24).
Tip:
Use a flashlight at different angles to help identify any air bubbles. If any foil needs to be removed and
reinstalled, discard the foil and use a new piece (Figures 25 and 26).
Figures 23 and 24 Air bubble under foil, air gap underneath foil.
Figure 25 and 26 use a flashlight to help identify any air bubbles in the foils and use the squeegee to work out
any defects.
Page 15 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Tip:
The foil must be fully applied underneath the trim panel. If the foil is folded over, it should be removed and a new
piece applied (see figure 27). Use the squeegee to work the foil down on to the water channel as far underneath
the trim panel as possible.
Figure 27 Foil folded and not adhered underneath trim panel
19. Reinstall the wind deflector and sunroof seal.
20. Close the sunroof and water test the vehicle to ensure there are no additional leaks.
Page 16 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Warranty
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
Procedures Manual 1)
Model(s)
Year(s)
Eng. Code(s)
Trans. Code(s)
VIN Range From
VIN Range To
Golf, Golf GTI
2015
All
All
AU_FM082335
AU_FM500000
Golf, Golf GTI
2016
All
All
AU_GM000001
AU_GM500000
Golf, Golf GTI
2017
All
All
AU_HM000001
AU_HM020000
SAGA Coding
Claim Type:
Use applicable Claim Type 1)
Service Number:
6052
Parts Manufacturer
Damage
Code
HST
Damage Location
(Depends on Service No.)
--
Use applicable when
indicated in Elsa (L/R)
0050
Golf, Golf GTI
Labor Operation 3) : Install Sunroof Water Channel
Repair Kit
60524199 = 170 TU
Labor Operation 3) : Water Test
60520399 = 20TU
Causal Part:
5GM898041
3YK 2)
Diagnostic Time 4)
GFF Time expenditure
01500000 = 00 TU max.
Road Test
01210002 = 00 TU
01210004 = 00 TU
Technical Diagnosis
01320000 = 20 TU max.
NO
NO
YES
Claim Comment: Input “As per Technical Bulletin 2045403” in comment section of Warranty Claim.
Page 17 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
1)
Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only
2)
Code per warranty vendor code policy.
3)
Labor Time Units (TUs) are subject to change with ELSA updates.
4)
Documentation required per Warranty Policies and Procedures Manual.
Required Parts and Tools
Part No:
Part Description
Quantity
5GM 898 041
Repair Kit
2
D 172 090 A2
Sealant
1
No Special Tools Required.
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.
Document Control Revision Table
Instance Number
Published Date
Version Number
Reason For Update
2045403/2
11/22/16
V601608
Updated title and model
clarification.
2045403/1
9/28/16
V601606
Original Publication.
Page 18 of 18
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: V601608 2045403
Replacement Service Bulletin Number:
MFR Communication Date: 2016-11-22
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.