NHTSA ID Number: 10129211
Manufacturer Communication Number: S-SB-0002-18
TSB/Document Date: 2018-02-21
Summary
TSB: Some 2016 model year iM vehicles may exhibit a MIL ?ON? condition with Diagnostic Trouble Code (DTC) P2820 present, indicating a Pressure Control Solenoid (shift solenoid valve SLP) Performance condition. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been updated to prevent this condition. Follow the Repair Procedure below to address this condition.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- MaxLife Technology prevents engine breakdown with 40% better...
- Includes seal conditioners to reduce oil consumption and oil...
- Added detergents reduce sludge, corrosion, rust and deposits...
- Advanced friction-fighting additives help maximize...
- Meets or exceeds all requirements of ILSAC GF-6A, API SP...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: S-SB-0002-18
Replacement Service Bulletin Number:
MFR Communication Date: 2018-01-24
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
S-SB-0002-18
January 24, 2018
MIL "ON" DTC P2820
Service
Category
Drivetrain
Section
Market USA
Applicability
YEAR(S)
MODEL(S)
ADDITIONAL INFORMATION
2016
iM
Transmission(s): CVT
Introduction
Some 2016 model year iM vehicles may exhibit a MIL “ON” condition with Diagnostic Trouble
Code (DTC) P2820 present, indicating a Pressure Control Solenoid (shift solenoid valve SLP)
Performance condition. The Engine Control Module (ECM) (SAE term: Powertrain Control
Module/PCM) logic has been updated to prevent this condition. Follow the Repair Procedure
below to address this condition.
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
TC1701
R & R Continuously Variable
Transaxle (CVT) Assembly
6.0
30400-12300
0.4
EG1701
T1
T2
19
8A
89661-#####
99
APPLICABLE WARRANTY
This repair is covered under the Toyota
Powertrain Warranty. This warranty is in effect for
60 months or 60,000 miles, whichever occurs first, from the vehicle’s in-service date.
The ECM is covered under the Toyota Federal Emissions Warranty. This warranty is in effect
for 96 months or 80,000 miles, whichever occurs first, from the vehicle's in-service date.
Warranty application is limited to occurrence of the specified condition described in
this bulletin.
© 2018 Toyota Motor Sales, USA
Page 1 of 6
S-SB-0002-18
January 24, 2018
Page 2 of 6
MIL "ON" DTC P2820
Parts Information
PART NUMBER
PART NAME
QTY
Computer, Engine Control (ECM)
–
30400-12300
1
32000-12500
Converter Assy, Torque
1
90177-22001
Nut (for Front Axle Shaft RH/LH)
2
43425-02050
Ring, Hole Snap (for Front Drive Shaft LH/RH)
2
17451-28040
17451-28032
Gasket, Exhaust Pipe
1
35012-12110
Hose Sub-assy, Transmission Breather
1
35150-48010
Plug Assy, Transmission Case
1
00451-00001-LB L
Authorized Modifications Labels
1
PREVIOUS
NEW
89661-0W170-A
89661-0W172
NOTE
The ECM (PCM) should NOT be replaced as part of the Repair Procedure.
Authorized Modifications Labels may be ordered in packages of 25 from the Materials Distribution
Center (MDC) through Dealer Daily – Parts – Dealer Support Materials Orders.
Required Tools & Equipment
REQUIRED EQUIPMENT
SUPPLIER
Techstream 2.0*
Techstream Lite
PART NUMBER
QTY
TS2UNIT
ADE
Techstream Lite (Green Cable)
TSLITEPDLR01
TSLP2DLR01
*Essential SST.
NOTE
Only ONE of the Techstream units listed above is required.
Software version 12.20.024 or later is required.
Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE)
at 1-800-368-6787.
Use Techstream or an approved J2534 interface to perform flash reprogramming updates. Visit
techinfo.toyota.com for more information regarding J2534 reprogramming.
© 2018 Toyota Motor Sales, USA
1
S-SB-0002-18
January 24, 2018
Page 3 of 6
MIL "ON" DTC P2820
Required Tools & Equipment (Continued)
SPECIAL SERVICE TOOLS (SST)
PART NUMBER
QTY
GR8 Battery Diagnostic Station*
00002-MCGR8
1
Crankshaft Pulley Holding Tool*
09213-54015-01
1
Companion Flange Holding Tool*
09330-00021
1
Engine Support Bar*
00002-ESUPPT-01
1
*Essential SST.
NOTE
Additional SSTs may be ordered by calling 1-800-933-8335.
REQUIRED TOOLS & MATERIAL
PART NUMBER
QTY
No. 1 Engine Hanger**
12281-37031
1
No. 2 Engine Hanger**
12282-37021
1
Bolt**
91552-81050
2
**These items are to be used with the Engine Support Bar (SST: P/N 00002-ESUPPT-01) and MUST be ordered
through NAPO.
Calibration Information
CALIBRATION ID
MODEL
iM
ENGINE
2ZR-FAE
PREVIOUS
NEW
30W01000
30W01100
© 2018 Toyota Motor Sales, USA
S-SB-0002-18
January 24, 2018
Page 4 of 6
MIL "ON" DTC P2820
Repair Procedure
1. Using Techstream, check for the following stored DTC:
P2820 – Pressure Control Solenoid (shift solenoid valve SLP) Performance.
Is the DTC present?
YES — Continue to step 2.
NO — This bulletin does NOT apply. Continue diagnosis using the applicable
Repair Manual.
2. Remove the CVT assembly.
Refer to TIS, applicable model and model year Repair Manual:
2016 iM:
Drivetrain – CVT – “K313 CVT: Continuously Variable Transaxle Assembly: Removal”
NOTE
Do NOT complete the following steps:
Step 16: Remove Torque Converter Assembly
Step 17: Remove CVT Oil Pump Type T Oil Seal
Step 23: Remove With Head Straight Screw Plug
Step 24: Remove No. 1 Breather Plug (CVT)
3. Install the replacement CVT.
Refer to TIS, applicable model and model year Repair Manual:
2016 iM:
Drivetrain – CVT – “K313 CVT: Continuously Variable Transaxle Assembly: Installation”
© 2018 Toyota Motor Sales, USA
S-SB-0002-18
January 24, 2018
Page 5 of 6
MIL "ON" DTC P2820
Repair Procedure (Continued)
4. Check for the Authorized Modifications Label affixed to the vehicle in the location shown
below. Confirm if the ECM (PCM) calibration has been updated.
Is the calibration ID listed the latest ECM (PCM) calibration?
YES — The vehicle has the correct calibration. Go to step 7.
NO — Continue to step 5.
Figure 1. Location of Authorized Modifications Label for 2016 iM
1
2
3
4
5
1
Replacement ECM (PCM) Part Number
(e.g., 89661-0W172)
4
Date Com pleted
2
New Calibration ID (e.g., 30W01100)
5
This SB Num ber
3
Dealer Code
© 2018 Toyota Motor Sales, USA
S-SB-0002-18
January 24, 2018
Page 6 of 6
MIL "ON" DTC P2820
Repair Procedure (Continued)
5. Flash reprogram the ECM (PCM).
NOTE
The GR8 Battery Diagnostic Station MUST be used in Power Supply Mode to maintain
battery voltage at 13.5V while flash reprogramming the vehicle.
For details on how to use the GR8 Battery Diagnostic Station, refer to the
“GR8 Instruction Manual” located on TIS – Diagnostics – Tools & Equipment –
Battery Diagnostics.
Follow the procedures outlined in Service Bulletin S-SB-0015-14, “Techstream ECU Flash
Reprogramming Procedure,” and flash the ECM (PCM) with the NEW calibration file update.
6. Prepare and install the Authorized Modifications Label.
A. Using a permanent marker, enter the following information on the label:
ECM part number [Refer to the Parts Information section for the NEW
PART NUMBER]
Calibration ID(s) [Refer to the Calibration Information section for the
NEW CALIBRATION ID]
Dealer Code
Repair Date
Change Authority [This bulletin number]
B. Install the Authorized Modifications Label on the vehicle at the location shown in
Figure 1. The Authorized Modifications Label is available through the MDC,
P/N 00451-00001-LBL.
7. Perform the Techstream ECT Reset Memory Utility.
8. Test drive the vehicle to confirm the repair.
© 2018 Toyota Motor Sales, USA
- [2026 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide
- [TOPDON Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler
/Dodge/Jeep/Fiat 2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast. - [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- Topfix AI Assistant: Covers 5 million plus fault codes and delivers instant causes, symptoms, and repair guidance with professional wiring diagrams for each code.Slashes diagnostic time, boosts first-time fix accuracy, and increases shop revenue
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary.
- Bi-Directional Control, Quickly Locate Problems: Turn your phone into a professional diagnostic tool. You can send commands from your phone to the ECU to test injectors, cooling fans, headlights, A/C clutch, windows, wipers, and more. See which one doesn't respond. Helps you quickly locate the problem and save time. No need to tear things apart, avoid blind disassembly.
- Full System Diagnostics, No Fault Hides: Unlike basic diagnostic tools that only cover 4 systems, TopScan can scan all systems. Read and clear trouble codes, view live data streams, and generate a complete vehicle health report – all issues are clear at a glance. Covers 10,000+ vehicle models and is compatible with 99.99% of vehicles.
- Flexible Subscription, Choose Advanced Features as Needed: TopScan Lite provides free-for-life access to core diagnostics, including full system scan, code reading, performance tests, and repair information. After purchase, advanced features (bi-directional control, service operations, live data, code clearing, and AI functions) are free-for-the-first-year. After the first year, if you want to use advanced features, you need to subscribe on a monthly, quarterly, or yearly basis. As new models and reset functions are updated, the tool will also be continuously upgraded.
- AI Assistant - TopFix: Think of TopFix as your personal AI mechanic. It leverages a repair database and OEM data to deliver clear, step-by-step repair solutions. Features include AI Q&A, one-click translation, and a full repair log, making your diagnostic process simpler and more efficient.
- 8+ Hot Resets, Keep Your Car in Top Shape: One-tap resets for oil, throttle, EPB, steering angle, DPF, ABS, BMS, and airbag. It enables car owners to easily perform essential maintenance, ensuring the vehicle stays in optimal condition and extends its service life.
This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API