FSB284-064 Service Bulletin/Repair Instructions

Volvo Trucks North

America

Greensboro, NC USA
Field Service Bulletin

Trucks

Date
1.2018
Group
No.
284 064
Release
Page
01
1(7)
Engine Control Module (ECM) and

Aftertreatment Control Module (ACM),

Reprogramming

VN, VAH, VHD
FSB 284-064 Engine Control Module (ECM) and

Aftertreatment Control Module (ACM),

Reprogramming

January 2018
Information

Software updates with enhancements are available for the engine control module (ECM) and

aftertreatment control module (ACM) for VOLVO D11, D13 and D16 engines on OBD2015

vehicles built from January 1, 2015 to December 31, 2015.

Follow the reprogramming procedure in the following order as outlined in this document:
•

•
USA140348062
ECM reprogramming

ACM reprogramming
PV729-FSB284-064_V
Volvo Trucks North America

Field Service Bulletin
Date

1.2018
Group
No.
Release
284
064
01
The software updates address the following Diagnostic Trouble Codes (DTCs):
•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•
P026C - Fuel Injector, Low Mass Flow

P0507 – Idle Engine Speed Rationality: Idle Speed High

P2002 – PM Filter Efficiency Monitor

P0422 – Catalyst 2 Efficiency Below Threshold (Bank 1)

P226D – Diesel Particulate Filter (DPF) Missing Substrate

P249C – Time to Enter DEF (Diesel Exhaust Fluid) Dosing

P208E – Aftertreatment Reagent Dosing Valve Clogged

P2459 – To Frequent Regeneration

P24A4 – DPF Restriction – Soot Accumulation Too High (Bank 1)

P10FE – DPF Restriction – Soot Accumulation Moderately High (Bank 1)

P226C – Boost Pressure Slow Response

P249F – Excessive Time to Enter Closed Loop DPF Regeneration Control

P24A0 – Closed Loop DPF Regeneration Control at Limit – Temperature Too Low

P208A – Aftertreatment DEF Pump: Open Circuit

P20CF – (AHI) Fuel Injector “A” Stuck Open

P226C00 – Turbocharger Boost Control “A” Slow Response

P205B – Aftertreatment DEF tank Temperature Sensor: Rationality Low

P20128 - Engine Cooling System: Stuck Open or Leaking Thermostat Monitor
Check the current main software for ECM and ACM to determine the action required as

shown in the table below.

Action Required

ECM
Main Software
Action Required
D11/ D13
Equal or Less Than

22741776
Update to Latest Software
D16
Equal or Less Than

22644015
Update to Latest Software
ACM
Main Software
Action Required
D11/ D13 / D16
Equal or Less Than

22741796
Update to Latest Software
Page

2(7)
Volvo Trucks North America

Field Service Bulletin
Date

1.2018
Group
No.
Release
284
064
01
Required Tools

Premium Tech Tool (PTT) version 2.06.35 or higher

Vocom Diagnostic Connector 88890304

Communication Interface 88890300

Note: Using other interfaces may affect programming speed.

Note: Check Premium Tech Tool version by clicking on Help tab and then click on “About

Tech Tool”.
Software Update Procedure

You must read and understand the precautions and guidelines in Service Information,

group 20, "General Safety Practices, Engines" before performing this procedure. If you are

not properly trained and certified in this procedure, ask your supervisor for training before

you perform it.
DANGER

Do not attempt to repair or service this vehicle without having sufficient training, the

correct service literature and the proper tools. Failure to follow this could make the vehicle

unsafe and lead to serious personal injury or death.

1 Park the vehicle on a level surface.

2 Apply the parking brake.

3 Place the transmission in neutral or park.

4 Install the wheel chocks.
W7086748
5 Connect Premium Tech Tool (PTT) to the vehicle diagnostics connector using the 16 pin

OBD cable 88890304 and Communication Interface 88890300. Connect the PC to a

functional LAN or modem connection and a 120 Volt AC source.
Page

3(7)
Volvo Trucks North America

Field Service Bulletin
Date

1.2018
Group
No.
Release
284
064
01
6 Turn the ignition switch “ON”.

7 Log in to PTT and Identify Vehicle is displayed.

8 Once the vehicle has been identified, enter the Work Order Number information, then

click Start Work.
W2115477
9 From the Main Menu select Program and then Program Electronic Control Unit 1700-0803-39. Then click Start.
W2115478
Page

4(7)
Volvo Trucks North America

Field Service Bulletin
Date

1.2018
Group
No.
Release
284
064
01
10 Select Engine Control Module (EMS).
W2115479
11 Select Program to update the ECM with the latest software.
W2115480
Page

5(7)
Volvo Trucks North America

Field Service Bulletin
Date

1.2018
Group
No.
Release
284
064
01
12 Certain conditions must be met to continue with programming: battery voltage above 10v,

parking brake applied, and ignition key in ON position with engine not running. When all

conditions have been met, click Continue to proceed with programming.
W2115481
13 Select “I accept” to agree to the terms and press continue to proceed.

Note: In the United States and Canada, the programing is NOT chargeable. An invoice

will not be generated.
W2115482
Page

6(7)
Volvo Trucks North America

Field Service Bulletin
Date

1.2018
Group
No.
Release
284
064
01
14 When programming is complete, click Exit to return to Main Menu to program the ACM.

15 When all programing is complete, clear any diagnostic trouble codes (DTC) and Finish

Work.

16 Remove the wheel chocks.
W7086759
Reimbursement

This repair may be eligible for reimbursement if a

product failure was experienced within time and mileage

limits of the applicable Warranty coverage.

Reimbursement is obtained via the normal claim

handling process.
UCHP

Reimbursement
Claim Type (used only when uploading from the Dealer

Bus. Sys.)
W
Labor Code

Primary Labor Code (Engine Control Module (ECM) and

Aftertreatment Control Module (ACM), Reprogramming)
2841-22-09-16

0.4 hrs.
Causal Part
3092091
VOLVO Trucks North America reserves the right to make any changes in design or to make

additions to or upon its products without incurring any obligations to install the same on

vehicles previously built.
Page

7(7)

SaleBestseller No. 1

LAUNCH CRP123 V2.0 OBD2 Scanner-2026 New Model Engine/ABS/SRS/Transmission Diagnostic Scan Tool SRS Airbag Code Reader,3 Reset Oil Service/Throttle Relearn/SAS Reset,Lifetime Free Update

【Great Ideal For Every Car Owner】Prefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! Also, the lifetime update is provided for more vehicle coverage, bug fixes. SAVE AT LEAST $1000+ PER YEAR!Get LAUNCH CRP123 V2.0 car diagnostic scanner and give your lover a surprise!*R each us to Get the Extra Gifts :Protective Case Storage Bag.
【Newly Added 3 Reset Functions】CRP123 V2.0 obd2 scanner with upgrades it offers Throttle Adaptation,Oil Reset and SAS Reset functions for FREE now!! Optimize your engine performance with Throttle Adaptation, reset your oil life system with ease to save time and money on maintenance, and enhance your vehicle's handling and safety with SAS Reset.Covering more daily repairs,become the most cost-effective product in its price range,save your time and money!
【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 V2.0 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
【 Error Fault Code Reader】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and Vehicle Information, O2 Sensor Test, EVAP Test of Fuel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 v2.0 obd2 scanner can not only reveal what error codes your car is producing, but also erase your vehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】Live Data Graphing,more intuitive to know your vehicle’s problem.4 inches Screen Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.

SaleBestseller No. 2

Launch OBD2 Scanner CRP123X V3.0 Elite, 2026 Lifetime Free WiFi Update Scan Tool, FCA SGW, CANFD&DoIP, SAS/Throttle/Brake/BMS/D-P-F/Oil/ABS Service Multi Systems Car Scanner, Battery Test, Auto VIN

[Newly Added in 2026: 7 Reset Functions] The 2026 new version of the OBD2 scanner diagnostic tool CRP123X V3.0 Elite has new special functions for F.REE: Throttle Ad.aptation, Oil/SAS/BMS/Brake Reset, D-P.F Re.generation and ABS Service. Before you visit a mechanic, launch obd2 Scanner CRP123X Elite can perform a more in-depth diagnosis of the car system and provide accurate data within minutes. What's more, the list of compatible models has been expanded. Upgrading frequency is regular, occurring monthly even weekly.
🔥[FCA AutoAuth + CAN FD & DoIP] As an upgraded version of the LAUNCH CRP123X/CRP129X, FOXWELL NT614, and ANCEL FX2000, The Newest LAUNCH CRP123X V3.0 auto diagnostic scanner supports the following new protocols: CAN-FD for 2020 and newer G.M and Chrysler models, as well as DoIP for V.olvo, Land Rover/Jaguar, and B.MW F/G chassis. With integrated AutoAuth, you can diagnose 2018 and newer FCA cars equipped with S.GW. Note: CAN-FD and DoIP protocols require an additional obd2 cable. *Menus vary by make, model, and year of gasoline or diesel engine vehicle. Email us your VIN data.
🔥[No extra software fee. Works on 90 vehicle brands.] Most OBD2 scanners work with vehicles manufactured after 2001. However, the LUNCH OBD2 scanner is compatible with OBDII-equipped vehicles built after 1996 and works with more than 90 vehicle brands. One-click lifetime updates over WIFI 2.4&5.0Ghz keep the car software current and ensure constant coverage additions, diagnose vehicles from 1996 to 2026 with a massive global database. Android 8.1 ensures lightning-fast boot-up and processing.
[Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X V3.0 to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership. Generate vehicle health reports with one click and share them via email over Wi-Fi to help avoid blind maintenance. And will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
[Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis（or 4-in-1 merged waveform graph),you can save, share, print, or email the overall inspection report for easier analysis.🔥Code Search,DTC Library provide massive information. Inbuilt “Feedback” module provides customized repair suggestions from our certified professionals.

SaleBestseller No. 3

LAUNCH X431 CRP919EBT 2026 Wireless Bidirectional Scan Tool, All-in-One Full System OBD2 Scanner, ECU Coding, 35+ Services, CANFD&DOIP, FCA AutoAuth, VAG Guide, 2Yrs Free Update, Upgraded of CRP919E

🔥【2026 TOP HARDWARE AND SOFTWARE UPGRADE，UPGRADED OF CRP919E】LAUNCH scanner CRP919EBT wireless obd2 scanner has upgraded TOP HARDWARE CONFIGURATION and ADD NEWEST FUNCTIONS. The more FASTER and SMARTER CRP919EBT with 🔥Bluetooths & USB 2-in-1 connect🔥Android 10.0 OS🔥2.0Ghz 4 core high efficiency processor 4GB RAM+64GB ROM large storage🔥6300mAh large battery, more stable and longer lasting diagnostics🔥VAG Guided🔥ECU Code🔥Bi-directional Control🔥35+ Resets🔥CANFD&DOIP🔥FCA AutoAuth🔥Full System Diagnostics🔥2 Yrs Update🔥Newly add BST360 battery tester & I-TPMS & VSP600 endoscope🔥23+ Languages. Provide an unparalleled diagnostic experience at an affordable price.
🚗【CAN FD & DOIP & FCA, SUPER PROTOCOL】LAUNCH X431 CRP919EBT is equipped with the DBSCAR VII Bluetooth connector supporting CANFD and DoIP. The CRP919EBT automotive diagnostic scanner supports CAN FD protocol (compatible with post-2020 GM vehicles). It also meets DoIP protocol requirements (adapter sold separately) for compatibility with BMW (E & F chassis) models from 2017 onward. Autoauth for FCA SGW supports FCA vehicles including Chrysler models from 2017 and later.
✔️【ADVANCED ECU CODE, ADAPTATION, CALIBRATION & INITIALIZATION】The LAUNCH X431 CRP919EBT automotive scanner delivers ‌exceptional ECU code capabilities‌ for customized vehicle setups. It provides ‌dealer-level functionality‌ to streamline maintenance and repairs, enabling ‌ECU matching and learning for enhanced customization.
👍【BIDIRECTIONAL CONTROL, 4000+ ACTIVE TESTS】LAUNCH OBD2 scanner CRP919EBT features bi-directional control - the most demanded capability among mechanics. When headlights or windows malfunction, repairs can be costly. With CRP919EBT, execute ECU commands and assess repair status through systems including ABS, windows, valves, wipers, and headlights - streamlining diagnostics while slashing repair expenses.
🥇【35+ MOST POPULAR RESET SERVICE FOR 160 MAKES】Same as Snap-on scanners, CRP919EBT scan tool delivers 35+ reset functions for 160+ vehicle models, including: service oil reset, throttle adaptation, steering angle calibration, brake pad replacement code, tire pressure reset, ABS bleeding, battery registration, gear signal learning, and injector code, etc.

This product presentation was made with AAWP plugin.

Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API

Buffer Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads Bluesky Copy Mastodon Nextdoor