2018

Q5/SQ5
Audi Pre-Delivery Inspection
Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle

Vehicle Preparation

Trunk Inspection (continued)

 Check Elsa for open campaigns and updates

 Set spare tire pressure*

 Deactivate vehicle transport mode*
This step must be performed with the engine off, and ignition on

 Check battery clamps for proper torque*

 Set adaption channel to enable CD Ripping (if equipped with
NAV)*

 Verify operation of all seat belts and latches

 Set service reminder*
 Perform any open campaigns*

Interior
 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*
 Check rear view mirror operation*

Exterior

 Verify operation of all interior lights

 Inspect exterior for damage, dings, dents and surface
scratches

 Verify SOS button is green and Roadside assistance button
LED will remain off (if equipped)

 Check all key buttons and features*

 Verify operation of heated/ventilated seats (if equipped)

 Prepare the base bars for customer delivery (install bars
only upon customer request)*

 Verify proper operation of climate control*

Lighting and Windshield
 Test exterior lighting functions

 Inspect operation of all power outlets*
 Check panoramic sunroof and sunshade operation*
 Verify the glove compartment opens and closes properly

 Test front washers (and headlight washers if equipped)*

 Verify operation of front Passenger Occupant Detection
System

Trunk Inspection

Settings

 Verify power tailgate is operational and set default opening
height*

 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*

 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*

 Verify operation of MMI touch pad (if equipped)

 Verify tool kit is installed securely in luggage compartment

 Verify and set language and Measurement Units*

 Verify inflatable spare tire and compressor are present

 Verify Speech dialog system is operating*

Effective 3-8-2017-US
Version 1.0

 Set Time to “Automatic setting” and “Automatic time zone”

PRE-DELIVERY INSPECTION (PDI) | 1

2018

Q5/SQ5
Audi Pre-Delivery Inspection
Settings (continued)

Driving Performance

 Set “Entertain. Fad.” in Parking aid to an audible level*

 Check horn operation

 Load Onboard Video Tutorials*

 Verify hold and release of electronic parking brake

 Set “Music volume while parking” to 6 lines*

 Verify engine Start-Stop System functionality*

 Set dealership location in navigation (if equipped)*

 Verify engine performance and acceleration*

 Turn off Manual Speed Warning (if equipped)*

 Verify transmission operation, including shift paddles (if
equipped)

Media / Radio / SAT

 Test drive vehicle applying brakes several times*

 Verify operation of AMI or aux. input (if equipped)

 Check steering/tire alignment

 Verify operation of CD/DVD player (if equipped)

 Check for squeaks, rattles and wind noise

 Insert SD card and test function of all slots

 Calibrate rear view mirror*

 Verify HD Radio is turned “off”*

 Verify quality of radio reception in AM/FM/SiriusXM bands

Audi connect (USA ONLY) (if equipped)

Driver Assistance

 Verify Audi connect Information Packet is present (if
equipped)*

 Verify cruise control/ACC functionality (if equipped)

 Check LTE connection is possible (if vehicle is marked retail
sold in DMS, data is only available after customer starts
6-month trial in www.myaudiconnect.com)

 Verify operation of parking system (if equipped)*

 Verify Audi side assist functionality (if equipped)
 Verify all vehicle Head-up display functionality (if equipped)*

 Turn on the wireless network (if equipped)*

 Activate NAV and follow directions back to dealership (if
equipped)

 Check Wi-Fi hotspot visibility (if equipped)*
 Enable Google Earth (if equipped)*

Post-Road Test Inspection
 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server

On-Hoist Inspection
 Remove transport suspension blocks (follow ELSA instruction)
 Check steering, boots, brake system, hoses, tires and wheels
for damage

 Check Service Interval and verify correct interval is displayed*
 Check engine oil level*

 Check underside of vehicle for fluid leaks and loose components

 Check all fluid levels and top off if necessary

 Inspect wheel bolts for proper torque*
 Install wheel locks (if equipped)

 Ensure the yellow tire pressure tag is installed on the steering wheel

 Install wheel bolt covers and center caps as supplied*

 Apply Inventory Maintenance Sticker**

 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*

 Install showroom charger to ensure battery remains
charged at all times**

 Perform a battery test*

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.

Technician Signature

Effective 3-8-2017-US
Version 1.0

Last 8 of VIN

Completion Date

PRE-DELIVERY INSPECTION (PDI) | 2