NHTSA ID Number: 10127005
Manufacturer Communication Number: 5NP-S9H5J-01
TSB/Document Date: 2018-01-16
Summary
When servicing a vehicle with a "Check Engine light" with any of the DTCs listed below, follow the Service Procedure and replace the related solenoid and E-module or park position switch.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- MaxLife Technology prevents engine breakdown with 40% better...
- Includes seal conditioners to reduce oil consumption and oil...
- Added detergents reduce sludge, corrosion, rust and deposits...
- Advanced friction-fighting additives help maximize...
- Meets or exceeds all requirements of ILSAC GF-6A, API SP...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 5NP-S9H5J-01
Replacement Service Bulletin Number:
MFR Communication Date: 2017-12-12
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
GROUP
NUMBER
AUTOMATIC
TRANSMISSION
17-AT-001-1-G
DATE
Technical Service Bulletin
SUBJECT:
MODEL(S)
DECEMBER, 2017
GENESIS
G80 (DH)
GENESIS G90 (HI)
AUTOMATIC TRANSMISSION SOLENOID DTC P0741, P0743, P0748,
P0753, P0758, P075A, P075D, P0763, P0768, P076A, P07B5, P076D,
P0773, P0785, P078A, P0995 & P2709
This TSB supersedes TSB 17-AT-001-G to add the procedure for solenoid pressure
characteristics input (Steps 10 and 28).
Description: When servicing a vehicle with a “Check Engine light” with any of the DTCs listed below,
follow the Service Procedure and replace the related solenoid and E-module or park position switch.
Applicable Vehicles:
2017~
2017~
Genesis G80 (DH) 3.3L/5.0L with Shift-by-Wire (SBW)
Genesis G90 (HI) 3.3L/5.0L with Shift-by-Wire (SBW)
DTC LIST & SOLENOID AND E-MODULE INFORMATION:
DTC
DESCRIPTION
PNC
PART NO.
P0741 P074100 Torque converter clutch circuit performance or stuck off
46202A
46313-3B01*
P0743 P074300 Torque Converter Clutch Circuit Electrical (TC)
46202A
46313-3B01*
P0748 P074800 Line Pressure Control Solenoid Valve A Electrical (LP)
46313A
46313-3B60*
P0753 P075300 Shift Control Solenoid Valve A Electrical (UD)
46313
46313-4J10*
P0758 P075800 Shift Control Solenoid Valve B Electrical (6)
46313
46313-4J10*
P075A P075A00 ON/OFF Solenoid Circuit (Park – SBC)
46313D
46313-3B03*
P075D P075D00 ON/OFF Solenoid D (PRH) – Electrical)
46313D
46313-3B03*
P0763 P076300 Shift Control Solenoid Valve C Electrical (35R)
46313E
46313-4J20*
P0768 P076800 Shift Control Solenoid D (4&OD)
46313E
46313-4J20*
P076D P076D00 ON/OFF Solenoid C (Park - SBW)
46313D
46313-3B03*
46313
46313-4J10*
P0785 P078500 ON/OFF Solenoid A (Drive – SBW)
46313D
46313-3B03*
P078A P078A00 ON/OFF Solenoid B (Reverse – SBW)
46313D
46313-3B03*
46313
46313-4J10*
46305C
46305-4****
P0773 P077300 Shift Control Solenoid Valve E Electrical (27)
P2709 P270900 Shift Control Solenoid Valve F Electrical (8LR)
All
All
E-Module
Circulate To: Service Manager, Warranty Manager, Service Advisors, Technicians, Fleet Repair
SUBJECT: ATM SOLENOID DTC P0741, P0743, P0748, P0753, P0758, P075A, P075D, P0763,
P0768, P076A, P07B5, P076D, P0773, P0785, P078A, P0995 & P2709
PARK POSITION SWITCH DTC & PARTS INFORMATION:
DTC
DESCRIPTION
PNC
PART NO.
P076A
P076A00 SBW Park System Fault – (SBW)
42700E
42700-4J50*
P07B5
P07B500 Park Position Sensor Circuit Low
42700E
42700-4J50*
P0995
P099500 Auto Shift Manual Mode Circuit (SBC)
46700E
46700-B1***
WARRANTY INFORMATION:
MODEL
2017~ Genesis G80 (DH)
2017~ Genesis G90 (HI)
OP CODE
OPERATION
OP TIME
Solenoid valve
Refer to
assy.
WEBLTS for
current LTS
Park position
time
42700R00
switch
45775R8T
CAUSAL NATURE CAUSE
PART
CODE
CODE
Refer to
parts
catalog
13A
ZZ3
13A
ZZ3
SERVICE PROCEDURE:
1.
Attach a GDS and select DTC Analysis and A/T menu. Record the DTC and description.
Delete the DTC.
2.
From the GDS home screen, select Data Analysis and A/T menu and the solenoid parameters
shown below. If the solenoids show:
Continuous and changing output while driving, the wiring currently has no open/short
circuits. Go to Step 4.
No continuous and changing output, go to Step 3.
TSB #: 17-AT-001-1-G
Page 2 of 11
SUBJECT:
ATM SOLENOID DTC P0741, P0743, P0748, P0753, P0758, P075A, P075D, P0763,
P0768, P076A, P07B5, P076D, P0773, P0785, P078A, P0995 & P2709
3.
Visually check the wiring harness between the TCM and transmission for a damaged wire or
connector. Check for an open/short circuit.
If so, repair or replace the ECM control harness and drive the vehicle to confirm the repair.
If no damage is found, go to Step 4.
4.
Record the audio preset stations and disconnect the negative battery terminal.
5.
Locate the harness connector on the passenger
side of the transmission.
Press the tab in the center of the latch and push
the latch upward.
Push the connector up to disconnect the
connector from the valve body.
To gain better access to the connector, place a
support under the rear transmission support,
loosen the bolts about ½ inch and lower the
support about ½ inch.
6.
Use an 8mm or 5/16” hex wrench and remove
the fill plug.
Torque: 17~18 lb.ft (2.3~2.5 kgf.m, 22~24 N.m)
TSB #: 17-AT-001-1-G
Page 3 of 11
SUBJECT: ATM SOLENOID DTC P0741, P0743, P0748, P0753, P0758, P075A, P075D, P0763,
P0768, P076A, P07B5, P076D, P0773, P0785, P078A, P0995 & P2709
7.
Use an 8mm or 5/16” hex socket and remove the
drain plug and drain the ATF. Reinstall the drain
plug.
Torque: 17~18 lb.ft (2.3~2.5 kgf.m, 22~24 N.m)
8.
Remove 10 bolts that secure the valve body to
the case and remove the valve body.
Note the location of the 3 black bolts (shown with
black arrow).
If the valve body is stuck in the transmission,
insert a screwdriver between the valve body and
case and carefully pull the valve body out of the
transmission.
9.
Remove 9 bolts and remove the E-module.
TSB #: 17-AT-001-1-G
Page 4 of 11
SUBJECT:
ATM SOLENOID DTC P0741, P0743, P0748, P0753, P0758, P075A, P075D, P0763,
P0768, P076A, P07B5, P076D, P0773, P0785, P078A, P0995 & P2709
10. Record the 8-digit solenoid pressure
characteristics before installing the solenoid.
11. Refer to the solenoid DTC recorded in Step 1
and replace the related solenoid.
DTC SOLENOID
PNC
P0753
UD
46313
P0768
4&OD
46313E
P0763
35R
46313E
P0773
27
46313
P0758
6
46313
P2709
8LR
46313
R
46313D
P078A
P0785
D
46313D
P
36313D
P076D
P0743
TC
46202A
P0748
LP
46313A
12. For UD, 4&OD, 35R, 27, 6 and 8LR solenoids:
Remove one bolt and remove the solenoid
support.
TSB #: 17-AT-001-1-G
Page 5 of 11
SUBJECT: ATM SOLENOID DTC P0741, P0743, P0748, P0753, P0758, P075A, P075D, P0763,
P0768, P076A, P07B5, P076D, P0773, P0785, P078A, P0995 & P2709
13. Use a magnet to remove the pin that secures the
affected solenoid.
Pull out the affected solenoid and install the new
solenoid.
Reinstall the pin.
Reinstall the solenoid support using one bolt.
14. For R, D, P, TC and LP solenoids:
Use a 5mm hex wrench or socket to remove 4
bolts that secure the support to the valve body
and remove the support.
15. Pull out the related solenoid and install a new
solenoid.
Reinstall the support.
TSB #: 17-AT-001-1-G
Page 6 of 11
SUBJECT:
ATM SOLENOID DTC P0741, P0743, P0748, P0753, P0758, P075A, P075D, P0763,
P0768, P076A, P07B5, P076D, P0773, P0785, P078A, P0995 & P2709
16. Install a new E-module.
Install 9 bolts and torque to specification.
NOTE: Install the short bolt in the location shown
in the circle.
Torque: 7~9 lb.ft (1.0~1.2 kgf.m, 10~12 N.m)
17. Confirm that 4 O-rings are seated in the case.
18. Place the valve body on a transmission jack.
Rotate the park switch counter-clockwise and
carefully raise the valve body and insert the
manual valve into the shift lever.
Install the valve body fully into the transmission
case.
NOTICE
Confirm the manual valve pin
faces outward from the valve
body.
TSB #: 17-AT-001-1-G
Page 7 of 11
SUBJECT: ATM SOLENOID DTC P0741, P0743, P0748, P0753, P0758, P075A, P075D, P0763,
P0768, P076A, P07B5, P076D, P0773, P0785, P078A, P0995 & P2709
19. Install 3 black bolts in the locations shown (black
arrow).
Install 7 brass bolts in the location shown (red
arrows).
Torque the bolts to specification.
Torque: 7~9 lb.ft (1.0~1.2 kgf.m, 10~12 N.m)
20. Use a 90° pick or similar tool to pull the
connector down into position on the valve body.
Pull the latch down until it clicks into the tab.
21. Confirm the O-ring is installed at the location
shown.
Reinstall the valve body cover and torque to
specification.
Torque: 10~12 lb.ft (1.4~1.6 kgf.m, 14~16 N.m)
22. Reconnect the negative battery terminal. Reset the audio preset stations.
TSB #: 17-AT-001-1-G
Page 8 of 11
SUBJECT:
ATM SOLENOID DTC P0741, P0743, P0748, P0753, P0758, P075A, P075D, P0763,
P0768, P076A, P07B5, P076D, P0773, P0785, P078A, P0995 & P2709
23. With the engine off, lift the vehicle on a hoist.
Use an 8mm or 5/16” hex socket and remove the
fill plug and washer.
24. Remove the overflow plug.
Use a fluid pump or suction gun to add
SPH-IV-RR ATF through the fill plug until ATF
flows from the overflow plug.
Reinstall the fill plug and overflow plug.
.
NOTICE
Use only SPH-IV-RR ATF, P/N
00232-19052.
25. Attach a GDS and select vehicle, Data Analysis, A/T menu and Oil Temperature Sensor.
Move the shift lever from P-R-D and back to P. Drive the vehicle until the ATF is at the low end
of the range of 122~140°F (50~60°C).
TSB #: 17-AT-001-1-G
Page 9 of 11
SUBJECT: ATM SOLENOID DTC P0741, P0743, P0748, P0753, P0758, P075A, P075D, P0763,
P0768, P076A, P07B5, P076D, P0773, P0785, P078A, P0995 & P2709
26. Start the engine, shift to Neutral and raise the
vehicle on a hoist.
Remove the fill plug and overflow plug.
Add SPH-IV-RR ATF through the fill plug until
the ATF flows out the overflow.
Reinstall the overflow plug.
Torque: 16~18 lb-ft (2.3~2.5 kgf.m, 21~24 N.m)
Reinstall the fill plug and washer.
Torque: 27~33 lb.ft (3.7~4.6 kgf.m, 33~44 N.m)
ATF TEMPERATURE = 122~140°F (50~60°C)
SHIFT LEVER IN “P” AND ENGINE RUNNING
27. If the shift cable was moved to add ATF:
Install the SST (09480-D2100) or 5mm bolt in the
alignment hole of the park position switch.
Loosen the adjustment bolt shown.
Slide the adjustment bracket rearward to remove
the slack in the park cable.
Tighten the bolt to specification.
Torque: 7~8 lb-ft (0.9~1.0 kgf.m, 9~10 N.m)
SST
28. Attach a GDS and select S/W Management,
Automatic Transaxle and Oil Pressure
Characteristics Input (Solenoid Valve
Replacement). Select OK.
Confirm the instructions and select OK.
Follow the prompts and input the pressure
characteristics from Step 10.
TSB #: 17-AT-001-1-G
Page 10 of 11
SUBJECT:
ATM SOLENOID DTC P0741, P0743, P0748, P0753, P0758, P075A, P075D, P0763,
P0768, P076A, P07B5, P076D, P0773, P0785, P078A, P0995 & P2709
29. Test drive the vehicle for two driving cycles (two key-on to key-off driving cycles, including 1-23-4-5-6-7-8 upshifts and 8-7-6-5-4-3-2-1 downshifts). If the solenoid DTC returns, perform the
following repairs:
DTC
P0741 P074100
P0743 P074300
P0748 P074800
P0753 P075300
P0758 P075800
P075A P075A00
P075D P075D00
P0763 P076300
P0768 P076800
P076D P076D00
P0773 P077300
P0785 P078500
P078A P078A00
P2709 P270900
DTC
P076A P076A00
P07B5 P07B500
P0995 P099500
SOLENOID DTC REPAIR PROCEDURE
Replace the transmission
Replace the control wiring harness between the TCM and
transmission.
If the solenoid DTC does not occur again, return the vehicle to
the customer.
If the solenoid DTC returns again, replace the TCM.
PARK POSITION SWITCH DTC REPAIR PROCEDURE
Refer to the G80 or G90 Shop Manual for the related DTC and
follow the repair diagnosis for Wiring Inspection and ETM.
30. Clear DTC in the BlueLink system per instructions of TSB 12-BE-005-2.
31. Drive the vehicle to confirm the proper operation of the transmission.
TSB #: 17-AT-001-1-G
Page 11 of 11
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAM
and 64GB ROM, serving up to 5X faster than older MAX/MINI/PLUS vehicle scanners, no more slow and delayed feedbacks, it's time to update your garage tool. - [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCA AutoAuth（The 689BT only provides a login and purchase portal, and users are required to register for an FCA account and pay a membership fee in order to perform the relevant automotive diagnostics)
- [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
- [Hot Advanced Features] 689BT bidirectional tool newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
- 【Warm Tips】Wired THINKSCAN 689 is connected through a detachable OBDII cable, and we also have added OBD2 Extension Cable (about 60 cm/2 feet) as g ift, enabling customers handling vehicle repairs with ease. Just click "Bundles Item" above to get it.
- 【Professional Car Diagnostic Tool】Tired of renew fees? Thinkscan 689 scanner provides dealer-level advanced functions for lifetime f.r.e.e update for auto mechanics and repair shops. 34+ Services, 3000+ Active Test, ECU Coding, 140+ Brands Coverage, FCA AutoAuth, CANFD&DOIP Protocol, Component Matching, Power Balance, V.A.G Guided, Compatible with Google Chrome integration, etc. With strong hardware backing, 64G Memory, Android 10, 4-core processors, and 4150mAh battery. Thinkscan 689 brings you the best as your daily business helper and never lets you drop the ball!
- 【Over 34 Reset Service, Adaptation + Relearn + Calibration + Initialization + Matching】Made for workshops, Thinkscan 689 scanner provides 34+ services for worldwide vehicles: such as Gear/SAS/EPB/TPMS/D.P.F/I.M.M.O/BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset, ABS Bleed, Injector coding, etc. Warm tips: Compatibility may vary on vehicles' model and year, please contact seller before purchase to make sure it works well on your cars.
- 【Real Active Test】Thinkscan 689 scan tool features over 3000+ full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior&exterior lights, sound horn, test door lock actuators, turn on/off front/rear side ACM Solenoid, Vehicle level position calibration, Wheel Speed Sensor Supply.
- 【Comprehensive Solutions with Advanced Features】Take your vehicle customization to the next level with the Thinkscan 689's advanced ECU coding capabilities. This scan tool provides power balance, PMI, unlock more new features and enhance performance by activating dormant functions, customizing OE settings, matching replaced components, and reprogramming adaptive data to elevate your driving experience. Note: Compatibility varies by car models, please check before order.
- 【Powerful Bidirectional Control -- Active Test】Good News! The THINKSCAN 662 obd2 scanner has bidirectional control function,which is the most popular feature among mechanics.This function is mainly used to test whether the executing components in the electronic control system can work normally,By requesting information from the vehicle's ECU or sending commands to the ECU module to execute commands and identify maintenance status,quickly locate the cause of the fault.Such as ABS,Fuel Injectors,Adjusting Throttle,Coolant Fans,Radiator Fans,Coolant Pumps,EV.AP Test, Fuel Trim Reset,Injector Buzz Test,Pump/ Value Test,etc. Effectively shorten diagnosis time and reduce diagnosis costs.
- 【Unlock Pro-Level Diagnostics With Half Costs】 THINKSCAN 662 obd2 scanner diagnostic tool Delivers Premium Scanning Power for Half the Price! The OBD2 scanner can handle common issues with ECM,TCM,ABS,SRS. It can easily read and clear fault codes, analyze data streams, and ensure quick identification of problems. THINKSCAN 662 bidirectional scan tool has 12 practical reset functions, including Airbag Reset,ABS Bleeding,BMS,Brake Reset, D.P.F,Throttle Adaptation,Injector Coding,OIL Reset,steering angle Reset,Gearbox,TPMS,and more. The car scanner diagnostic tool very suitable for DIY enthusiasts, car repair technicians, and small and medium-sized repair shops.
- 【Multi Functional Intelligent Car Scanner Diagnostic Tool】 Automatic VIN + Real-time Data + DTC Lookup + Historical Diagnostic Records: This OBD2 scanner features auto serch technology, allowing for car recognition without the need for manual input. The real-time data of the car ECU is read and displayed in the form of text or a 4-in-1 merged waveform chart. You can save, share, print or send the entire inspection report via email for analysis. Historical diagnostic reports help you quickly identify vehicle issues and understand the condition of the vehicle. The built-in 'feedback' module provides customized repair Operation recommendations from our certified professionals.
- 【Upgraded Hardware + Ergonomically Engineered】 THINKSCAN 662 OBD2 scanner has a friendly combination of touch screen and physical buttons with an ergonomic appearance for comfortable use.Experience 2x faster scans and 50% longer lifespan vs standard models.This scanner para autos boast a 4-core 1.8GHz CPU,6.2-inch HD touch screen,2GB RAM + 32GB ROM storage capacity,a long-lasting 4150mAh battery,Android 8 ensures lightning-fast bootup and processing.The scanner is robust with rubberized protection that you can store and use in the trunk or garage.Whether you are engaged in Home car maintenance or road rescue car repair,this car scanner can help you perfectly solve car problems.
- 【Effortless Setup & Scanning - Intuitive for All Skill Levels】No More Complicated Scanners! The User Interface is as User-Friendly as THINKCAR 689BT! Truly Plug-and-Play,The downward sliding setup shortcut portal and drawer function shortcut portal make you use this scan tool as easy as using your own cell phone.The car scanner supports setup screenshot,screen recording,volume adjustment,this scan tool includes product e-manuals,instructional videos,and fault code libraries,users can check the usage guide,perfect for DIY car owners,Maintenance technician.If your father,husband,brother,boyfriend enjoys car repairs,THINKSCAN 662 is a great gift choice, and it has amazing family value.
This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API