NHTSA ID Number: 10126601
Manufacturer Communication Number: FSB 237-018
TSB/Document Date: 2017-12-22
Summary
OBD2013 Conical Injector Kits
Volvo Trucks
North
America
Greensboro, NC USA
Field Service Bulletin
Trucks
Date
5.2013
Group
No.
237 018
Release
Page
01
1(6)
OBD2013 Conical Injector Kits
D13H
VAH, VHD, VN
FSB 237-018, OBD2013 Conical Injector Kits
(May 2013)
In the event that a single injector failure or an engine stumble under load is experienced on an
OBD2013 D13H engine with a vehicle build date before May 4, 2013 (engine serial number
clean point 1027785), all six injectors are required to be replaced. New injector kits are
available (part number 85137080) to upgrade to the new NCV coated injectors. Kit contains
six injectors, six injector sleeves, six O-rings, six hold down bolts and graphite paste to
address these failures as necessary. Along with the installation of the injector kit the engine
control module (ECM) programming is required and fuel tank ventilation filter kit needs to be
installed.
Note: For the current procedure for replacing conical injectors and stainless steel sleeves,
see service bulletin 237-60, Unit injector and Sleeve, Replacement (Conical). Failure to follow
the procedure exactly can result in denial of warranty.
Overview
1 Verify injectors have not already been updated to the latest part number (22027808). If
injectors have been updated, this bulletin does not apply. Follow normal repair procedures.
2 Refer to service bulletin 237-60 for injector and sleeve replacement.
Note: When replacing injectors, the ECM must be programmed with the new injector trim
codes. The code is printed on top of the injector electrical connector. The programming is
performed using Premium Tech Tool (PTT) and is necessary to ensure that engine timing
and emission levels are correct. Do not enter the new trim codes until after ECM
programming is complete.
3 If the vehicle is not equipped with fuel tank filter vents, use procedure in Field Service
Bulletin FSB 234-014 to install fuel tank ventilation filter.
Required Parts
Injector Kit — part number 85137080
Ventilation Filter Kit — part number 85136403 for on-highway applications, part number
21882780 for off-road applications
Note: For on-highway applications, one ventilation filter kit is required for each fuel tank.
Required Tools
Premium Tech Tool version 2.01.51 or higher
Diagnostic Connector 88890304
Communication Interface 88890300 with firmware 1.12.0.2 or higher
USA59400
PV7-)6%B9
English
Volvo Trucks North America
Field Service Bulletin
Date
5.2013
Group
No.
Release
237
018
01
ECM Programming Procedure
DANGER
Do not attempt to repair or service this vehicle without having sufficient training, the correct
service literature and the proper tools. Failure to follow this could make the vehicle unsafe
and lead to serious personal injury or death.
Note: Information is subject to change without notice.
Illustrations are used for reference only and may differ slightly from the actual engine
version. However, key components addressed in this information are represented as
accurately as possible.
You must read and understand the precautions and guidelines in Service Information,
Function Group 20, "General Safety Practices, Engine" before performing this procedure. If
you are not properly trained and certified in this procedure, ask your supervisor for training
before you perform it.
1 Connect PTT to the vehicle diagnostics connector using the 16 pin OBD cable 88890304
and Communication Interface 88890300. Connect the PC to a functional LAN or modem
connection and a 120 Volt AC source (do not use intermediate storage).
2 Turn the ignition switch “ON”.
3 Log in to PTT and Identify Vehicle.
Page
2(6)
Volvo Trucks North America
Field Service Bulletin
Date
5.2013
Group
No.
Release
237
018
01
4 Once the vehicle has been identified, enter the work order number information, then click
Start Work.
W2079940
5 From the Main Menu select Program and then Program Electronic Control Unit 1700-0803-39. Then click Start.
W2079941
Page
3(6)
Volvo Trucks North America
Field Service Bulletin
Date
5.2013
Group
No.
Release
237
018
01
6 Select Engine Control Module from the list.
W2079943
Page
4(6)
Volvo Trucks North America
Field Service Bulletin
Date
5.2013
Group
No.
Release
237
018
01
7 Select Update Electronic Control Unit with latest software, then click Program.
W2079942
8 Certain conditions must be met to continue with programming: Battery voltage above 10V,
Parking brake applied, and Ignition key in ON position with Engine not running. When all
conditions are met, click Continue to proceed with programming.
W2080113
Page
5(6)
Volvo Trucks North America
Field Service Bulletin
Date
5.2013
Group
No.
Release
237
018
01
9 Once Engine Control Module programming is complete, select 1700-22-03-03 Parameter,
programming and click Start.
W2080067
10 Open Group View tab and scroll down to ID P1AM4, Trim Code, Injector Cylinder 1 and
enter the injector trim code into the Value field. Repeat for all six injectors and click
Continue.
W2082160
11 When programming is complete, click Exit to return to Main Menu, clear any diagnostic
trouble codes (DTC) and Finish Work.
Reimbursement
This repair may be eligible for reimbursement if a product failure was experienced
within time and mileage limits of the applicable Warranty coverage. Reimbursement is
obtained via the normal claim handling process.
Page
6(6)
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: FSB 237-018
Replacement Service Bulletin Number:
MFR Communication Date: 2013-05-30
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.