NHTSA ID Number: 10124839
Manufacturer Communication Number: PDI - 2015 A8-A8
TSB/Document Date: 2017-12-05
Summary
This document contains the Audi
pre-delivery inspection checklist. All items must be completed prior to customer delivery by an Audi
technician. Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests. For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- Scanner POR V2.0 with all obd2 services
- Do the scanning for engine
- Support OBDII/EOBD Ten Modes of Operation
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: PDI - 2015 A8-A8
Replacement Service Bulletin Number:
MFR Communication Date: 2014-11-03
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
2015
A8/A8 L/A8 W12/S8/A8 L TDI
Audi
Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
All items must be completed prior to customer delivery by an Audi
technician
Audi
recommends using an Audi
approved battery charger to prevent excessive battery discharge during inspection
It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests
For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
Open Campaigns/Updates
Trunk Inspection (continued)
Check Elsa for open campaigns and updates
Verify tool kit is installed securely in luggage compartment
Transport Mode Deactivation, DTC Check, Set Service
Reminder
Deactivate air suspension loading mode*
Deactivate vehicle transport mode*
Verify trunk operation, including emergency release handle
Lighting and Windshield
Test exterior lighting functions
Test front washers (and headlight washers if equipped)*
Perform an SVM specified /actual comparison*
Perform any open campaigns *
Set adaption channel to enable CD Ripping (if equipped with
NAV)*
Interior
Check heated steering wheel operation (if equipped)
Verify operation heated/ventilated seats (if equipped)*
Set service reminder*
Verify operation of all seat belts and latches
Under the Hood Inspection
Verify operation of front Passenger Occupant Detection
System
Check all fluid levels and top off if necessary
Check battery clamps for proper torque*
Verify proper operation of climate control*
Verify rear climate control operation (if equipped)*
Check engine oil level*
Perform a battery test*
Switches / Outlets and Windows
Check horn operation
Exterior
Check all doors for proper power closing (if equipped)*
Check all key buttons and features*
Verify power rear lid/tailgate is operational
Trunk Inspection
Install wheel bolt cover removal tool from PDI kit into trunk
lid toolkit
Set spare tire pressure (See separate “2015 Normal Load
Condition Tire Pressure Table” posted on ServiceNet)
Check operation of window, lock, and seat controls*
Check panoramic sunroof operation*
Check power rear and rear side sunshade operation (if
equipped)
Check rear view mirror operation*
Inspect mirrors for proper operation*
Inspect operation of all power outlets*
Verify operation of all interior lights*
Verify operation of rear side manual sunshades (if equipped)
Verify operation of Hands-free trunk release
Effective 11-3-2014-US
Version 1.3
PRE-DELIVERY INSPECTION (PDI) | 1
2015
A8/A8 L/A8 W12/S8/A8 L TDI
Audi
Pre-Delivery Inspection
Audi
connect (USA ONLY) (if equipped)
Driver Assistance
Check Wi-Fi hotspot functionality*
Activate NAV and follow directions back to dealership (if
equipped)
Connect the dealer demo SIM card to verify system connects
to mobile network*
Enable Google Earth (if equipped)*
Verify all vehicle Head-up Display functionality (if
equipped)*
Verify Audi
active lane assist functionality (if equipped)
Turn on the wireless network*
Verify Audi
side assist functionality (if equipped)
Verify Audi
connect Information Packet is present*
Media / Radio / SAT
Verify cruise control/ACC with Stop & Go functionality (if
equipped)
Insert SD card and test function of all slots
Verify operation of Audi
parking system (if equipped)*
Program the presets to local stations
Verify operation of night vision camera (if equipped)
Verify HD Radio is turned “off”*
Driving Performance
Verify operation of AMI
Check adaptive air suspension in all positions (if equipped)
Verify operation of DVD changer (if equipped)
Check for squeaks, rattles and wind noise
Verify operation of Rear Seat Entertainment (if equipped)*
Check steering/tire alignment
Settings
Test drive vehicle applying brakes several times*
Load Onboard Video Tutorials*
Verify engine performance and acceleration*
Set “Music volume while parking” to 6 lines*
Verify engine Start-Stop System functionality (if equipped)*
Set dealership location in navigation (if equipped)*
Verify quality of radio reception in AM/FM/SAT bands
Set Time source setting to “GPS” and set Auto daylight savings time to “on.”*
Verify transmission operation, including shift paddles (if
equipped)
Verify and set language and Measurement Units*
Post-Road Test Inspection
Verify Voice Activation is operating (if equipped)*
Apply Inventory Maintenance Sticker
On-Hoist Inspection
Check steering, boots, brake system, hoses, tires and wheels
for damage
Check underside of vehicle for fluid leaks and loose components
Inspect wheel bolts for proper torque*
Ensure the yellow tire pressure tag is installed on the steering wheel
Install showroom charger to ensure battery remains
charged at all times
Interrogate fault memory and print Diagnostic Log
Record final mileage and sign checklist
Install wheel bolt covers*
Set and store tire pressures for either sold vehicle OR stock
inventory vehicle (See separate “2015 Normal Load Condition Tire Pressure Table” posted on ServiceNet)*
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi
Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 11-3-2014-US
Version 1.3
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM
+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs. - 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 【2026 OTOFIX D1 Lite Gives the Best Value for Money】OTOFIX D1 Lite bidirectional scan tool is more FASTER and SMARTER with 2026 Enhanced Hardwares & New Functions! 👍Alternative Bluetooth +USB connect 👍2G+64GB 👍4x ARM Cortex-A35 (1.5GHz) Processor (5X Faster CPU) 👍Android 9.0 OS 👍5G GHz WiFi 👍CANFD&DOIP 👍 FCA
AutoAuth 👍38+ Services 👍3K+ Bi-Directional Control 👍Full Systems Diagnose 👍2 Years Update 👍150+ Vehicle Coverage. - 👍【Active Tests】 OTOFIX D1 Lite is a bi-directional scan tool that can send commands to, and also receive information from vehicle control modules. This way, you can quickly locate and repair faulty auto parts. For Example: send direct commands to ask the vehicle to turn on/off the radiator fan, lights, sound horn, fuel pump, modulate throttle, open/close windows, operate mirrors and more. *Note that only available tests will be displayed in the menu.
- 👍【38+ Service Functions】 OTOFIX D1 Lite scan tool offers 38+ of the hottest service functions that are commonly used for car repairs. That include Oil reset/SAS/EPB/BMS/Throttle/ABS bleeding, and 2065-new SUS/ADBLUE/NOX/Headlamp resets (and more) to help restore your car status after repairs are done. Compared to other diagnostic scanners for cars, the OTOFIX D1 Lite scanner is much more fully-featured. *Note that specific functions available depend on the make/model/year of your car.
- 👍【All System Diagnostics + Cloud Report Management】 This 2026 car scanner OTOFIX D1 Lite provides troubleshooting and data for all ECUs: read/clear DTCs, view graphic live data/VIN, and locate system faults for safe driving. With Cloud Report Management, you can save detailed reports to cloud servers and easily shared them with others via QR codes/emails/text messages. Others can access these reports from any device (smartphones/tablets/PCs …) anytime, and you can better manage repair work.
- 👍【99% Car Coverage】 This one-station car scanner diagnostic for all cars works on 150+ major car brands across the world. 1) It supports CAN-FD/DoIP protocols: compatible with GMCAVALIER/TRAX/Encore/Envision/GL8(LSY)/CT4/CT5 after 2019; Volvo
after 2018; Land Rover
/Jaguar
after 2017; and BM.W F/G all chassis. 2) For models equipped with security modules (such as Renault & 2018+ FCA
SGW), its built-in AutoAuth allows you to easily break diagnostic barriers after registration.
This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API




