Loading...

NHTSA ID Number: 10123018

Manufacturer Communication Number: V581503 2039212

TSB/Document Date: 2017-11-08


Summary

Technical Bulletin (Corrosion on Rear Door in Trim Strip Area): Because of incomplete bonding of the trim strip water can get between trim strip and door. Because of water ingress, corrosion is possible in the area of the guide holes. This document contains information on how to diagnose, and service this issue. This document also gives examples on filling out a claim form for the service.


Technical Bulletin
Model(s)

Year

Eng. Code

Trans. Code

VIN Range From

VIN Range To

Passat

2006 – 2010

All

All

All

All

Passat Wagon

2006 – 2010

All

All

All

All

CC

2009 – 2012

All

All

All

All

Condition
58 15 03 July 21, 2015 2039212 Supersedes Technical Bulletin 581405 dated December 19, 2014 to updated
service number.
Corrosion on Rear Door in Trim Strip Area

Figure 1 (the red ellipses show the area which can be affected by the corrosion)

Note:
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures
Manual.
Documentation required per Warranty Policies and Procedures Manual.
For vehicles outside of the Limited Warranty Against Corrosion Perforation this Technical Bulletin is for information
only.

Page 1 of 9 Plus attachments.
© 2015 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Technical Background
Because of incomplete bonding of the trim strip (Figure 2, red circle) water can get between trim strip and door.
Because of water ingress, corrosion is possible in the area of the guide holes (Figure 1, red circles).

Figure 2 (the red circle shows the opening of the incomplete bonding)

Production Solution
Not Applicable.

Page 2 of 9 Plus attachments.
© 2015 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Service
1a. Repair Rear Door Only perform this operation if the total repair cost is 80% or less of the total replacement
cost.
Or
1b. Replace Rear Door
Step 2 needs to be completed regardless of a repair or replacement.
2. Replace the Trim strip and apply butyl sealer on trim strip:
1a. Repair the rear door as follows:
 Disassemble the door according to the repair manual. See Repair Group 58 in Elsa
 Remove the corrosion on the inner and outer door in the area of the guide holes using a pneumatic brush
grinder.
Note:
If through-corrosion (perforation) is not present, door replacement will only be accepted if it qualifies per the
Reimbursement Policy section of the Warranty Policies and Procedure Manual. This section provides important
guidelines when considering component repair vs. replacement options (the “80% rule”).
 Apply a VOC compliant epoxy primer as an anti-corrosion treatment and primer to both sides of the door
(locally sourced).
 Repaint the rear door according to Volkswagen guidelines.

1b. Replace the rear door as follows:
 Replace the door according to the repair manual. See Repair Group 58 in Elsa
 Paint the rear door according to Volkswagen guidelines.

Page 3 of 9 Plus attachments.
© 2015 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
2. Replace the Trim strip and apply butyl sealer on trim strip:
 To avoid repeated water ingress, close the open areas on the trim strips in the end points of the adhesive tape
with butyl sealing cord (part number AKL 450 005 05 - Figure 3 and 4, red arrows).

Figure 3 (rear end of a trim strip)

Figure 4 (front end of a trim strip)
 Form two balls of butyl sealing cord (part number: AKL 450 005 05) per trim strip with a diameter of 4-5 mm.
Attach the butyl balls centrally in the end areas of the trim strip from the inside (Figures 5 and 6).

Figure 5 (rear trim strip area)
Page 4 of 9 Plus attachments.
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin

Figure 6 (rear trim strip area)
 The open areas of the adhesive tape must be closed by pressing the butyl balls into the gaps of the tape
(Figure 7).

Figure 7 (front trim strip area)
 Install the trim strip on the door according to the repair manual. See Repair Group 66 in Elsa.
 Apply cavity wax on the inside of the door around the holes that the trim strip secures.
 Assemble and reinstall the door according to the repair manual. See Repair Group 58 in Elsa.

Page 5 of 9 Plus attachments.
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Warranty
Note:
 Dealers may complete the repair as described without prior authorization (through a WISE Warranty Repair
Acceptance request).
 Documentation required: Clear pictures, completed estimate and body shop invoice must be saved and kept on
file at the Dealership for audit purposes.
 This bulletin applies for 1 door repair or replacement. If both doors exhibit the corrosion they should be
evaluated individually and claimed on separates lines. Total Body Painting Prep Time for both doors should be
claimed on the first line only.
 Labor time units (TU), Material units (MU), and Material unit rate are correct at the time of publication. The time
units and/or material units may differ if the repair catalogue is updated. The information in the repair catalogue
applies, except for the open time items (labor operations ending in 99) which are calculated at actual time
multiplied by the body shop labor rate. The material allowance (Paint material price per unit) is subject to
change. Refer to WISE > Resource Center > Forms > Paint/Corrosion for the most current forms.
 This section is applicable for vehicles within the terms of Volkswagen’s Limited Warranty Against Corrosion
Perforation. For vehicles outside the terms of the Limited Warranty Against Corrosion Perforation this section is
for information only.
 This bulletin may be provided to outside shops to ensure the proper repair is completed.
Note:
Claim Processing Options
Option 1: Utilize the attached form examples and interactive forms on WISE to assist with calculating the
reimbursement amounts. This will expedite the claim review process and reduce the time to pay the claim.
Note that miscalculations are subject to claim adjustment.
For the complete set of pre-populated Paint/Corrosion Claim Form templates associated with this Technical
Bulletin, refer to WISE > Resource Center > Forms > Paint/Corrosion.
Option 2: Email repair estimates to paintcamp@vweBay logo.com. The Paint and Corrosion Team will calculate the
warranty allowance and complete the required form(s) on behalf of the dealer.

Page 6 of 9 Plus attachments.
© 2015 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
Procedures Manual 1)
Model(s)

Year(s)

Eng. Code(s)

Trans. Code(s)

VIN Range From

VIN Range To

Passat

2006 – 2010

All

All

All

All

Passat Wagon

2006 – 2010

All

All

All

All

CC

2009 – 2012

All

All

All

All

SAGA Coding
1601)

Claim Type:

Damage
Service Number:

HST

Damage Location
(Depends on Service No.)

--

160 or 162

Code
5829

0003
CC (357)

160 or 1622)

Passat Sedan and Passat Wagon
(3C*)

160 or 1622)

Parts Manufacturer

Repair
Please use the following part number in “Outside Materials” 4)
LACKMATF: Paint and Materials

MU @ $12 per unit

Epoxy Primer (Locally Sourced)

Claim Dollar Amount (MAX: $40)

Please use the following Labor Operation in “Outside Labor” 4)
Select the appropriate Labor Operation below:
- L0010000: External Painting-straight color
Claim Dollar Amount
- L0020000: External Painting-metallic/2-layer
- L0030000: External Painting-pearl color
Use this for all body repair in this bulletin:
Claim Dollar Amount
- A0041000: Body Shop repair no paint
Page 7 of 9 Plus attachments.
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Replace
Please use the following part number in “Outside Materials” 4)
LACKMATF: Paint and Materials

MU @ $12 per unit

Please use the following Labor Operation in “Outside Labor” 4)
Select the appropriate Labor Operation below:
- L0010000: External Painting-straight color
Claim Dollar Amount
- L0020000: External Painting-metallic/2-layer
- L0030000: External Painting-pearl color
Use this for all body repair in this bulletin:
Claim Dollar Amount
- A0041000: Body Shop repair no paint
Causal Part:

L00#0000
Diagnostic Time 4)

GFF Time expenditure

01500000 = 00 TU max.

NO

Road Test

01210002 = 00 TU

NO

01210004 = 00 TU
Technical Diagnosis

01320000 = 00 TU

NO

Claim Comment: Input “As per Technical Bulletin 2039212” in comment section of Warranty Claim.
1)

For Vehicles outside the Limited Warranty Against Corrosion Perforation this bulletin is information only

2)

Corrosion claim vendor code will be the damage location.

3)

Labor Time Units (TUs) are subject to change with ELSA updates.

4)

Documentation required per Warranty Policies and Procedures Manual.

5)

See attachment “srt_reference_table.pdf” for labor time reference.

Page 8 of 9 Plus attachments.
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Required Parts and Tools
Repair and Replace
Part number
AKL 450 005 05

Designation
Butyl sealing cord (Quantity 0.05)
One of the following

3C0 853 753 C 2ZZ

Rear Left Door Trim Strip

3C0 853 754 C 2ZZ

Rear Right Door Trim Strip
Replace (One of the following)

3C5 833 055 H

Rear Left Door

3C5 833 056 H

Rear Right Door

For Special Tools see Repair Manual.

Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.

Page 9 of 9 Plus attachments.
© 2015 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Paint/Corrosion Claim Form

400000

Dealer No.
Repair
Order No.

910000

VIN (17-Digits)

XXXXXXXXXXXXXXXXX

Color No. (4-digit ElsaPro Paint No.)

LR9A

Dealer Labor Rate

If repeat repair, provide explanation in box below:

100.00

Paint material price per unit

Service No.

Damage
Code

Dmg
Loc

Part manufacturer
(Vendor Code)

5829

0003

160

160

12.00

Dealer-owned paint shop?

Yes

Original paint material?

Yes

Description of Repair

Paint Rear Door

Paint Labor Operation(s)

No
No
Time
Units

Mat'l
Units

58517903

110

51017133

190

7

Verify ALL Labor Operation Time Units
and Material Units

If multiple doors are affected, the prep time
should be entered on the first line of the
SAGA claim and only once on the first
Paint/Corrosion Claim Form

Note: Authorization and claim reimbursement are contingent on the usage of original
parts for the repair

Body Painting Prep Time

The vehicle history must be checked for any previous damage. Digital photographs must be included with the repair order per VWoA instructions. If there is a
sublet invoice for painting, the invoice amount must be split between outside (sublet) labor and outside (sublet) material.

Part Number

Part Description

EPOXY

Part Qty

Epoxy Primer

Part Price
per Unit

1 $

Total Part
Price

40.00

Example Part Qty and Part Price per Unit only

Description of Repair

70731900

40

Remove and install door carriereBay logo unit

58301950

50

Remove and install rear door parts

58516500

50

Repair door (Remove Corrosion)

58516300

70

Wax Body

51017550

10

Bond trim strip with butyl

66414199

10

Example Time Units

Part Amount Subtotal

$

40.00

Body Labor Subtotal

230

Total Paint Material Amount

$

84.00

Total TU/MU

530

Total Parts Amount

$

124.00

VWeBay logo Representative

12

SaleBestseller No. 1
Autel Scanner MaxiCOM MK900BT, 2026 MK900-BT V2.0 Bidirectional Diagnostic Tool, 8in Up of MK900 MX900 MK808S MK808BT MX808S MK808Z, 3000+ Active Tests, 40+ Service, CAN-FD&DOIP, All System, FCA 11 OS
  • 💯【Conta.ct us for Support Directly】If you met any...
  • 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
  • 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
  • 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
  • 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
Bestseller No. 2
Autel Scanner MaxiCheck MX808S, 2026 Bidirectional OBD2 Scan Tool US Ver. of MaxiCOM MK808S MK808Z, 3000+ Active Test 11OS as MK900 MK900BT MX900, 28+ Service for 200+ Brands, OE All Diagnostic, FCA
  • 📌【We are Here for You】Dear valued customer, please be...
  • 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
  • 🔥【3000+ Active Tests = MK900/MK900BT but...
  • 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
  • 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...

If the PDF is very large, it may not load in the preview below.

Download PDF [915.69 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: V581503 2039212

Replacement Service Bulletin Number:

MFR Communication Date: 2015-07-21

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: STRUCTURE

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
108 Reviews
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Sale
XTOOL D7S Bidirectional Scan Tool, 2026 AI-Assisted OBD2 Scanner Diagnostic Tool with FCA AutoAuth, All System Car Scanner, 39+ Resets, ECU Coding, PMI, Upgrade of D7, Crankshaft Relearn, CAN FD/DoIP
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for FordeBay logo, for LincolneBay logo, and for MazdaeBay logo ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for FordeBay logo, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
  • 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
2026 BOSSCOMM IF745 Scanner Diagnostic Tool, Check Engine Code Reader with 6 Resets, ABS Bleeder/Oil/EPB/SAS/Throttle/Battery, Scanner Diagnostic Tool for Vehicles, Lifetime Free Update, Auto VIN
  • 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
  • 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
  • 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
  • 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.​
  • 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.

This product presentation was made with AAWP plugin.

Share to...