NHTSA ID Number: 10123015
Manufacturer Communication Number: V871506 2019947
TSB/Document Date: 2017-11-08
Summary
Technical Bulletin (Air Conditioning, Cleaning of the Refrigerant Circuit (U.S.Only)): In cases where an air conditioning system component (such as a compressor or other system component) has failed and debris from the compressor or component is circulated throughout the refrigerant circuit, the refrigerant circuit must be cleaned of any and all debris or damage to the replacement components will result. This document contains information on how to diagnose, and service this issue.
Technical Bulletin
Model(s)
Year(s)
Eng. Code(s)
Trans. Code(s)
VIN Range From
VIN Range To
1998 - 2016
All
All
All
All
All Models
(except Routan)
Condition
87 15 06 July 7, 2015 2019947 Supersedes T.B. V871409 dated September 24, 2014 to include additional
models, model years.
Air Conditioning, Cleaning of the Refrigerant Circuit (U.S.Only)
Debris can be dispersed throughout the refrigerant circuit after a/c component damage. In order to maintain A/C
operating efficiency, it is important to flush the refrigerant circuit after A/C component repairs.
Technical Background
In cases where an air conditioning system component (such as a compressor or other system component) has
failed and debris from the compressor or component is circulated throughout the refrigerant circuit, the refrigerant
circuit must be cleaned of any and all debris or damage to the replacement components will result.
Production Solution
No production change required.
Page 1 of 13
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Service
Tools
Use the ROB134APF Air Conditioning Service System with
VAS 6337/1A Air Conditioning System Flushing Device (Figure
1) Used for effective refrigerant handling and air conditioning circuit
flushing after air conditioning component failure.
Now air conditioning system refrigerant recovery, evacuation,
recharge and refrigerant circuit cleaning after component failure
can be performed with a single servicing station.
Figure 1. The ROB134APF Air
Conditioning Service System with VAS
6337/1A Air Conditioning System Flushing
Device.
The VAS 6338/1 Adapter Set for Refrigerant Circuits. Along with an additional adapter (VAS 6338/33 for the
front expansion valve bypass for the Touareg) this kit contains the adapters necessary to complete a thorough
flush operation of a contaminated circuit.
Elsa contains the technical information for each model regarding the necessary adapter applications
and connections of the servicing station for the flush operation. See Heating, Ventilation & Air
Conditioning >> Refrigerant R134A-Servicing >> 00 General Technical Data>> Refrigerant Circuit
removing contaminates>> Refrigerant Circuit, Flushing with Refrigerant R134A in Elsa.
All other refrigerant recovery, evacuation and recharge operations are performed using the usual procedure
specified in Elsa. An operations manual will accompany each servicing station that will describe operation of
the unit.
Page 2 of 13
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Procedure
Front A/C:
1. If an air conditioning component has been diagnosed as the root cause of the failure and this component is
suspected of releasing debris through the circuit, continue the diagnosis to determine if this is the case.
2. Turn the power to the servicing station on and begin by recovering the refrigerant from the system through the
normal service fittings.
Tip:
During the entire process avoid interrupting the power to the station. The station's internal memory will keep a log
of all operations and can conveniently be recalled and printed. If the power is interrupted, the station will lose the
memory of the process, and the oil volume recovered, oil volume added, refrigerant volume recovered, etc. will
have to be manually determined.
3. Disconnect the service hoses. The VAS 6338/1 adapters will be used to bypass the following:
Note:
For models in which the Receiver-drier is not over flushed as per the repair manual, the desiccant cartridge must
be removed for the flushing process.
Before flushing the A/C circuit, inspect the Receiver-drier cartridge screen for any tears and for any desiccant
material that may have been released into the A/C circuit. If the Receiver-drier screen is torn, replace the
condenser
prior to starting the flushing procedure.
Compressor.
Receiver-drier.
Expansion Valve/ Restrictor (if equipped).
If vehicle is equipped with a restrictor, remove the restrictor and reconnect the line.
Figure 2. A flushing attachment port.
This connection strategy allows for a system flush in the opposite direction of the normal refrigerant flow
(Figure 4).
Page 3 of 13
© 2015 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Figure 4. Connection strategy: Vehicle to service station to flushing device.
The flush program will begin with an evacuation of the system
and a rate of rise test. This is necessary to test the integrity of
the connections before the flush cycles begin. If the rate of rise
test passes, the program will proceed into the flush cycles.
(Figures 5 – 7). These cycles will occur automatically in
succession.
Figure 5. The first cycle.
Page 4 of 13
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Figure 6. The second cycle.
Figure 7. The third cycle.
The debris is then rinsed from the circuit and contained within the filtration in the flusher. After the flush
program, the system will be evacuated.
Page 5 of 13
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
5. After the system is evacuated, remove any adapters that were installed from the VAS 6338/1.
6. Replace Expansion Valve (if equipped), Receiver-drier and Restrictor (if equipped).
7. Connect the station in the usual manner through the service fittings and perform the normal evacuation and
refrigerant recharge operations.
8. Print a log of the job and attach to the repair order.
Touareg with Four Zone Climate Control – Rear A/C
For Touareg with four zone climate control, the flush process will be repeated for the additional air conditioning unit
(rear of vehicle) according to the repair information in Elsa.
1. Separate the front and rear air conditioning systems for
individual rinse operations.
The VAS 6338/1 contains the necessary adapters to separate
the systems for the individual rinse operations.
Figure 8. The location of the
connections inside the left front
wheelhouse on a Touareg with four
zone climate control.
2. Bypass the rear expansion valve with an adapter from the VAS 6338/1.
3. Flush rear A/C.
Figure 9. Location of rear air
conditioning unit and expansion valve.
4. When complete, remove any adapters that were installed from the VAS 6338/1.
Page 6 of 13
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
5. Replace defective components.
6. Connect the station in the usual manner through the service fittings and perform the normal evacuation and
refrigerant recharge operations.
7. Print a log of the job and attach to the repair order.
A/C Components Replacement
The following components must be replaced:
Expansion Valve (if equipped)
Restrictor (if equipped)
Receiver-drier
Page 7 of 13
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Warranty
Note:
The procedure outlined in this Technical Bulletin must be included with the warranty repair(s) and not claimed
independently.
You may claim $3.51 per A/C System flush for the A/C System Flush Machine filter BAI783400103 (which
represents ¼ the cost of a replacement filter).
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
Procedures Manual 1)
Model(s)
Year(s)
Eng. Code(s)
Trans. Code(s)
VIN Range From
VIN Range To
1998 - 2016
All
All
All
All
All Models
(except Routan)
Use applicable Claim Type 1)
Claim Type:
SAGA Coding
Damage Location
Damage
Service Number:
Use Service
Number of
Damaged
Component
HST
Code
(Depends on
Service No.)
Use damage code
appropriate for root
cause of failure
Use applicable
when indicated in
Elsa (L/R)
--
Labor Operation 3): Air Conditioner Clean, All
Vehicles, Front A/C only (except Touareg with four
zone climate control)
87012999 = 140 TU
Labor Operation 3) : Refrigerant drain and fill
87031700 = 60 TU
Parts Manufacturer
(removed part)
Use Vendor code
from failed
component
_ _ _2)
(2015> Golf/GTI, Golf R, Golf SportWagen Only)
Labor Operation 3) : Refrigerant drain and fill
87031700 = 50 TU
Labor Operation 3): Air Conditioner Clean, Touareg
with four zone climate control.
87013099 = 310 TU
Labor Operation 3): Air Conditioner Check, All
Vehicles.
87010150 = 30 TU
Page 8 of 13
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Labor Operation 3): Replace Expansion Valve, if
equipped.
8770XXXX = Claim appropriate SRT for vehicle and
engine in Elsa
Labor Operation 3): Replace Restrictor, if equipped.
8777XXXX = Claim appropriate SRT for vehicle and
engine in Elsa
Labor Operation 3): Replace Receiver-Drier
8755XXXX = Claim appropriate SRT for vehicle and
engine in Elsa
Outside Material: A/C Flush Machine filter, Part No.
BAI783400103
$3.51 total per A/C System Flush which
accompanies a repair (this amount equals ¼ of the
cost of the A/C flush machine filter)
Diagnostic Time 4)
GFF Time expenditure
01500000 = 00 TU max.
NO
Road Test
01210002 = 00 TU
NO
01210004 = 00 TU
Technical Diagnosis
01320000 = 00 TU max.
NO
Claim Comment: Input “As per Technical Bulletin 2019947” in comment section of Warranty Claim.
1)
Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only
2)
Code per warranty vendor code policy.
3)
Labor Time Units (TUs) are subject to change with ELSA updates.
4)
Documentation required per Warranty Policy & Procedures Manual.
Page 9 of 13
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Required Parts and Tools
Part Description
Part No:
Quantity
Expansion Valve
Vehicle Specific
1
Receiver-Drier
Vehicle Specific
1
Restrictor
Vehicle Specific
1
Tool Description
Tool No:
Air Conditioning Service System.
ROB134APF
Air Conditioning System Flushing Device
VAS 6337/1A
Page 10 of 13
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Air Conditioning System Flushing Device Filter
BAI783400103
Adapter set for refrigerant circuits
VAS 6338/1
Additional adapter for bypass of the front expansion
valve for Touareg
VAS 6338/33
Page 11 of 13
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Additional refrigerant circuit adapter
VAS6338/36
Additional refrigerant circuit adapter
VAS6338/38
Additional refrigerant circuit adapter
VAS6338/40
Additional refrigerant circuit adapter
VAS6338/41
Additional refrigerant circuit adapter
VAS6338/42
Page 12 of 13
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.
Page 13 of 13
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
- R134a Replacement - Hydrocarbon blend that is 100% natural...
- 6oz (11.7 fl oz) Cans - Compressed gas is measured by...
- SSV Cans - Self Sealing Valve allows for the storage of...
- Disclosures - Product is flammable like many other modern...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: V871506 2019947
Replacement Service Bulletin Number:
MFR Communication Date: 2015-07-07
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:APPLIANCE:AIR CONDITIONER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford
, for Lincoln
, and for Mazda
ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




