NHTSA ID Number: 10122885
Manufacturer Communication Number: VOS-17-10
TSB/Document Date: 2017-11-08
Summary
Updated diagnostic software certificate renewal instructions.
Service Information
Offboard Diagnostic Information System Service (ODIS Service)
Number: VOS-17-10
Subject: Security Certificate Renewal Instructions
Date: Feb. 27, 2017
Supersedes VOS-17-03 due to updated and additional information.
Table of Contents
Page
Section
1.0
Introduction
1
2.0
Certificate File Management
2
2.1
Preparation – MUST READ!
2
2.2
Delete Existing Certificates
2
2.3
Request Security Certificate (eCRMS)
4
2.4
Approve Security Certificate (eCRMS)
7
2.5
Download & Store Security Certificate
8
2.6
Import Security Certificate to Windows®
10
2.7
Import Security Certificate to ODIS Service
13
1.0 - Introduction
ODIS Service security certificates expire three years after creation. A certificate renewal prompt appears at
two months, and then one month etc. before expiration. Use the following procedures to renew a
certificate before its expiration date.
Notes:
• Please read these instructions carefully and in their entirety before performing the
procedures. If you do not understand these instructions, arrange to have a qualified person
perform the procedures.
• This document may be revised at any time. Always check ServiceNet for the latest version.
IMPORTANT:
These instructions are based on the Installation Phase 1 – Preparation, License & Certificate
Process Instructions where the certificate and a text document with the device hardware key
are stored in a folder on the device desktop, and a back-up copy of the certificate etc. are
stored on a USB flash drive.
If alternate storage and backup locations were used, determine them NOW.
Page 1 of 14
© 2017 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.0 – Certificate File Management
2.1 – Preparation – MUST READ!
Effective February 26, 2017, authorized dealership personnel are responsible for requesting and
approving ODIS Service security certificate requests for new and soon-to-expire certificates.
Security is achieved through dealership management approval of certificate requests, and a function
where request “approvers” cannot be the same as the “requestor”.
While anyone with eCRMS access can request a certificate, request approvers are restricted to
dealership managers with the following job titles and Unified Dealer Extranet (UDE – vwhub access)
roles:
• Dealer Principal (DLR-PRIN)
• Service Director (SVC-DIR)
• Dealer Principal/General Manager (DLR-PRGM)
• Service Manager (SV-SM)
• General Manager (GEN-MGR)
• Parts & Service Manager (PTSV-MGR)
Access to eCRMS on vwhub must be granted by the dealership Systems Administrator.
Prerequisites:
The Requestor must be aware of a dealership manager that can approve requests.
The Approver must be a dealership manager as defined above, and have eCRMS access.
Location of all storage and backup copies of the device’s existing certificate are known.
The diagnostic device’s hardware key and assigned device ID are known.
Diagnostic device is plugged in to power adapter and booted to Windows desktop. USB mouse and
keyboard connected to tablet.
2.2 – Delete Existing Certificates
When an active certificate is renewed prior to expiration, it is revoked and no longer valid. Avoid
inadvertent re-importation of a revoked certificate by deleting all stored and backup copies of the
certificate before renewal.
2.2.1 – Delete Stored and Backup Copies
1. Locate and delete all stored and backup copies of the device’s existing certificate, e.g.: desktop
folder, USB flash drive etc.
2.2.2 – Delete Certificate from Windows®
1. Launch Internet Explorer.
2. Press/hold the Alt + X keys, and then select Internet Options from the dropdown menu.
(cont.)
Page 2 of 14
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
3. Select the Content tab, and then select the Certificates subcategory:
4. From the Personal subcategory, confirm the VWGoA ODIS RootCA… certificate is automatically
highlighted as illustrated, and then select Remove . . . . Yes:
....
5. Select the Trusted Root Certification Authorities subcategory tab, and then click the Issued By
column header to sort the certificates in reverse alphabetical order: (The VWGoA ODIS RootCA…
certificate is automatically highlighted as illustrated below.)
6. Select Remove . . . . Yes, and then close all open windows:
(cont.)
....
Page 3 of 14
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.2.3 – Delete Certificate from ODIS Service
1. Start ODIS Service, and then select the Admin operating mode and Certificate subcategory:
2. Select /highlight the Available certificate as illustrated, and then select Remove /Yes:
3. Close ODIS Service.
2.3 – Request Security Certificate (eCRMS)
Prerequisites
All stored and backup copies of the existing certificate are deleted.
Text document with the device’s hardware key must be on hand.
Notes:
• The diagnostic device’s hardware key must be copied electronically from the text document
(not manually-typed) into the request form.
• As per the Phase 1 initial installation instructions, the hardware key should be located in a text
document stored in a folder on the device desktop, and backed-up on a USB flash drive.
1. Start Internet Explorer
2. Logon to vwhub.
3. From the My Favorite Apps or All Apps sections, select the link to ODIS Certificate Request Mgmt.
System (eCRMS).
(cont.)
Page 4 of 14
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4. Select Create Certificate . . . . Yes:
....
The eCRMS request interface appears.
Information must be entered in all request interface fields marked with an asterisk ( * )
5. Enter /confirm all applicable information required in the Dealer/Site Information and Contact
Information sections.
6. Enter the diagnostic device information in the Device Information section as follows:
a. Minimize the eCRMS browser session.
b. Navigate to the device folder on the Windows desktop (or other location) and Open the Hardware
Key text document:
c. Select and Copy the first 32 characters (only) of the device’s hardware key. Example:
Note:
The hardware key illustrated here is
an example only. All hardware keys
are different!
The characters are saved in Windows “clipboard” memory.
(cont.)
Page 5 of 14
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
d. Restore the eCRMS browser session.
e. In the *Device Type field, Select the device type from the dropdown menu.
f.
In the *Hardware ID field, use Windows keystroke combination Ctrl + V to Paste the 32character Hardware Key into the field. (Manual entry is not possible.)
g. In the *Device Name field, Enter the corresponding, assigned device ID.
When all required information fields ( * ) are filled in, click Submit:
Important:
A Service Manager or General Manager at your dealership must log in to eCRMS to approve any pending requests. Please note that
Managers cannot approve their own requests.
40XXXXX
40XXXXX
John Smith Autohaus
xxx-xxx-xxxx
xxxxxxxxxxxxxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxx
John Smith
xxx-xxx-xxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
VASXXXX
e
xxxxxxxx
f
g
Note: The device ID must be accurately matched with the hardware key in the preceding
step. The device ID and hardware key entered above will appear next to the certificate
file staged in eCRMS during the certificate download steps that follow.
7. Heed the Confirmation Create prompt, and then select Create New Certificate:
(cont.)
Page 6 of 14
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
8. Heed the Important message, and then click OK:
9. Note the Request Number from the request summary, and then select Close.
10. From the eCRMS header, click Close eCRMS, and then Close Internet Explorer.
Close eCRMS and Internet Explorer steps are mandatory!
11. Inform a manager authorized to approve certificate requests of the request number and diagnostic
device details, and ask that the request be approved as per the instructions in Section 2.4 below.
2.4 – Approve Certificate Request (eCRMS)
Prerequisites:
The Approver cannot be the same as The Requestor.
The request number is known.
1. Start Internet Explorer.
2. Logon to vwhub and go to the My Favorite Apps or All Apps section.
3. Click the link to ODIS Certificate Request Mgmt. System (eCRMS) and complete the eCRMS logon.
The View Certificate page displaying all active and pending dealer certificates appears first by default.
4. Locate the pending request by its Request Number and Pending Review status:
5. Click the Device Name for the pending request:
(cont.)
Note:
The Request Number, Device ID and Hardware ID information illustrated here
are examples only. Each diagnostic device is unique!
Page 7 of 14
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
6. Confirm the request details from the summary, and then select Approve:
7. Close the request summary, and then Close the eCRMS session.
When the certificate request is approved: A certificate is staged for download in eCRMS and a
confirmation email is sent to the requestor.
2.5 – Download & Store Security Certificate
Prerequisite:
The diagnostic device on which ODIS Service is installed is used to download and store the
certificate.
1. Start Internet Explorer.
2. Logon to vwhub and go to the My Favorite Apps or All Apps section.
3. Click the link to ODIS Certificate Request Mgmt. System (eCRMS) and complete the eCRMS logon.
The View Certificate page displaying all active and pending dealer certificates appears first by default.
4. Locate the approved certificate by its Request Number and Active status:
5. Check the certificate and then select Download Certificate:
(cont.)
Page 8 of 14
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
6. Heed the Download Instructions message, and then click OK:
7. Select Save:
8. Navigate to the device folder on the diagnostic device desktop, and Save the certificate in the
Certificate subfolder (or other location on the device):
Ensure the certificate file appears as being saved in the Certificate subfolder.
9. From the eCRMS header, click Close eCRMS.
10. Close Internet Explorer.
Note:
Be sure to save a copy of the certificate on the backup USB flash drive as well!
Proceed to Section 2.6 – Page 10
Page 9 of 14
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.6 – Import Security Certificate to Windows
The diagnostic device’s hardware key must be entered as a password during certificate importation.
Prerequisites:
Previous certificate deleted from Windows.
New security certificate saved to folder on device desktop or other location.
Text document with device’s hardware key on hand.
1. From the device folder on the Windows desktop (or other location on the device), Open the
Certificate subfolder and double-click the certificate (.pfx) file:
2. Select Next, .
. . confirm the certificate path is highlighted as illustrated and then select Next:
...
(cont.)
Page 10 of 14
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
3. From the device folder on the Windows desktop (or other location), Open the Hardware Key text
document:
4. Select and Copy the first 32 characters (only) of the hardware key. Example:
Note:
The hardware key illustrated here is
an example only. All hardware keys
are different!
The characters are saved in Windows “clipboard” memory.
5. Paste the 32-characters copied above into the Password: entry field, and then select Next:
................................
6. No action needed. Select Next:
(cont.)
Page 11 of 14
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
7. Select Finish:
8. Select Yes:
9. Click OK:
Proceed to Section 2.7 – Page 13
Page 12 of 14
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.7 – Import Security Certificate to ODIS Service
The diagnostic device’s hardware key must be entered as a password during certificate importation.
Prerequisites:
Previous certificate deleted from ODIS Service.
Text document with device’s hardware key on hand.
1. Start ODIS Service, and then select the Admin operating mode and Certificate subcategory:
2. Click Select:
4. From the device folder on the Windows desktop (or other location on the device), Open the
Certificate subfolder:
5. Select / highlight the certificate (.pfx) file (DO NOT double-click), and then click Open:
Note:
DO NOT double-click the certificate file
in its saved location!
(cont.)
Page 13 of 14
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
6. Ensure the certificate file directory path appears in the Certificate import window:
7. From the device folder on the Windows desktop (or other location), Open the Hardware Key text
document:
8. Select and Copy the first 32 characters (only) of the hardware key. Example:
Note:
The hardware key illustrated here is
an example only. All hardware keys
are different!
The characters are saved in Windows “clipboard” memory.
9. Paste the 32-characters copied above into the Password: entry field, and then select Import:
8. Click OK:
Page 14 of 14
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: VOS-17-10
Replacement Service Bulletin Number:
MFR Communication Date: 2017-02-27
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.