NHTSA ID Number: 10122874
Manufacturer Communication Number: AHW-17-13
TSB/Document Date: 2017-11-08
Summary
VAS 61 50 D Diagnostic Laptop ? Unpacking and Setup Instructions
Caution!
When handling the rechargeable battery:
•
The rechargeable battery should be replaced only by properly trained personnel.
•
Never short-circuit the rechargeable battery.
•
Never throw the rechargeable battery into a fire.
•
Dispose of, or recycle the battery only when completely discharged and in accordance with
local regulations.
Note
The battery is pre-installed in the laptop prior to shipment and does not require any further setup.
The information below is for future reference only.
If it becomes necessary to remove and reinstall the battery, switch the laptop off and proceed as follows:
1. Carefully turn the laptop over.
2. Slide and hold the battery lock button in the unlock position, then grasp the battery on its raised
edge and slide out of housing:
3. Install in reverse order. (It is not necessary to hold the battery release button during installation.)
Caution!
Ensure battery pack
locks into place to prevent accidental loss during transport.
Page 7 of 19
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
8.0 – Connecting to Power
During normal use the laptop is connected to power either directly via the power adapter, via the docking
station (port replicator) connection to the power adapter, or run from the internal rechargeable battery
pack.
Caution!
•
The power adapter includes a country-specific power cable (UL-approved or CSA-approved, oilresistant power cord). Use only the original Panasonic power adapter.
•
Operation on ungrounded or impedance-grounded electrical networks (IT electrical networks) is
prohibited.
9.0 – Windows® 10 - Initial Setup
9.1 – Preparation
Important Prerequisites:
Laptop is NOT mounted in docking station (port replicator)
Network (Ethernet) cable is NOT connected
1. Open the WIRELESS / Headphones / SD slot access cover (right side – middle) and check the
wireless operation switch position. Move the switch to the OFF position if necessary:
2. Connect assembled power adapter cables to a 115V A/C outlet and the DC IN 15.6V port:
Page 8 of 19
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
9.2 - Switching the Device On and Off
1. Switch on the laptop by briefly pressing the on/off button. On first startup, a series of automatic setup
screens appears before the initial Windows setup routine.
Caution!
•
When switching the laptop off after normal use, DO NOT press and hold the on/off button for
longer than 5 seconds! Forced shutdowns may result in hard drive faults.
•
To switch off after normal use: go to Windows (Start) > Power icon > Shut down
9.3 – Initial Setup
9.3.1 – Startup Settings
1. Confirm the regional settings. Then scroll down and select the applicable time zone. Select Next:
3. Accept the license terms:
. . . A series of automatic welcome and
setup screens appears (no user
intervention required).
This is followed by a “…signed out”
display and automatic restart after a
one minute delay.
(cont.)
Page 9 of 19
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4. Wait until the device restarts. Click Close if desired:
. . . After the device restarts, it can be mounted to its
base station (port replicator) if desired. However,
the power adapter must remain connected to
the laptop or base station for the remaining setup
9.3.2 – Delete Non-Applicable Information
1. Right-click > Delete the manuals folder from the Windows desktop:
2. Empty the Recycle Bin.
9.3.3 – Prepare Windows Desktop
The desktop layout and icons on VAS 6150D should remain limited to those essential for its initial setup,
and subsequent use as a vehicle diagnostics device only.
The installation of personal software and desktop personalization other than that specified below
is not recommended or supported.
The following shortcut “drag-and-drop” link creation steps enable quick, familiar access to key Windows
functions directly from the desktop. Shortcut locations will be referenced during the remaining setup steps
and in other Service Information documents.
1. From the taskbar, click the
icon to reveal the Windows Start menu.
2. Scroll down and locate the Settings category from the Windows Start menu.
3. Select and drag the
icon from the Windows Start menu to the desktop.
4. Reopen the Windows Start menu.
5. Scroll down the Windows Start menu and expand ( ( ∨ ) )
6. Select and drag the
icon from the Windows System menu to the desktop.
7. Select and drag the
icon from the Windows System menu to the desktop.
Page 10 of 19
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
9.3.4 – Set Date & Time
Note
The correct date and local time must be set on the device to ensure accurate ODIS Service
diagnostic protocol submissions.
1. From the Windows desktop, click the
icon.
2. From the Control Panel menu, select the
category.
3. Confirm that the correct Date: appears, and then select Change date and time…:
4. Set the correct time and time of day with the toggles as applicable, and then select OK:
5. Close the Date & Time window.
Page 11 of 19
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
9.3.4 – Device Power Management
To ensure uninterrupted data transfer when performing lengthy Software Version Management (SVM)
procedures, configure the device to remain on as follows:
1. From the Control Panel main menu, select the
v
category.
2. From the Control Panel Home menu (on the left), select: Change when the computer sleeps
3. Select Never from all category dropdowns, and then select Save changes:
Note
Retrieve the additional documentation specified in Section 2.0 before continuing.
10.0 – Network Setup
10.1 – Set Computer Name
If more than one diagnostic laptop or tablet is connected to the dealership network, each device must be
assigned a different computer name.
For detailed instructions refer to Service Information – Diagnostic Device Hardware & Windows
document title: VAS Diagnostic Device Computer Name Builder
Page 12 of 19
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
10.2 – Enable Network Connections
Prerequisites:
Network cable (Ethernet) and Wireless Local Access Network (WLAN) connections available.
Person performing network setup is familiar with all dealership network particulars, and I.T. Policy
where applicable. E.g.: Network set for DHCP, OR Static IP setup (all IP addresses known), WLAN
SSID (name) & security key, additional antivirus and security firewall settings if applicable etc.
1. Open the WIRELESS / Headphones / SD slot access cover (right side – middle) and switch the
wireless operation switch to the ON position:
2. Connect the Ethernet cable to the network port (right side – rear)
3. If the following prompt appears, select Yes:
(cont.)
Page 13 of 19
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4. From the Windows desktop, click the
icon.
5. From the Settings menu, select the
category.
6. Select the Wi-Fi and/or Ethernet subcategory as applicable:
Review the setup instructions for both and enable their connections in accordance with the dealership
network setup, and I.T. policies where applicable:
Page 14 of 19
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
11.0 – Windows Updates
1. On the Windows Desktop, right-click on the Windows button.
2. Click on Computer Management.
3. From the Computer Management Window, double-click on Services and Applications.
4. Double-click on Services.
(cont.)
Page 15 of 19
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
5. You will see a list of all Services. Locate and highlight Windows Update.
a) If the Status column is empty and the Startup Type shows Disabled, leave this window
open and proceed to Section 11.1 - How to enable Windows 10® updates
b) If the Status shows Running and the Startup Type shows Automatic or Automatic (Delayed
Start), close this window and proceed to Section 11.2 – How to perform Windows updates.
11.1– How to enable Windows 10® updates
1. Double Click on Windows Update.
2. You will perform the below 4 steps to enable the Windows Update Service.
a) In the Startup Type Box select Automatic
b) Click Apply
c) Click Start ( wait 4-5 seconds for the Service to start)
d) Click OK to close the Window
Page 16 of 19
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
11.2 – How to perform Windows Updates
1. On the Windows Desktop, click on the Windows button.
2. Click on Settings
3. Click Update & Security
Page 17 of 19
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4. Click Check for Updates.
12.0 – Install Offboard Diagnostic Information System Service (ODIS Service)
Request an ODIS Service license and security certificate, and then install and configure the latest
ODIS Service application and diagnostic database versions.
For detailed instructions, refer to Service Information - ODIS Service document titles (in order of use):
Installation Phase 1 - Preparation, License & Security Certificate Process Instructions
Installation Phase 2 - Software Installation & Configuration Instructions
13.0 – Setup VAS 6154 Diagnostic Interface
Familiarization:
Refer to Service Information - Diagnostic Device Hardware & Windows document title:
VAS 6154 Diagnostic Interface – Introduction Guide
Initial Setup:
For detailed instructions refer to Service Information - Diagnostic Device Hardware & Windows
document title: VAS 6154 Diagnostic Interface – Initial Setup Guide
Startup:
For detailed instructions refer to Service Information - Diagnostic Device Hardware & Windows
document title: VAS 6154 Diagnostic Interface – Startup Guide
IMPORTANT! V AS 6150D w ith Window s 10 does not support the
use of V AS 5054 A Diagnostic Interface (Bluetooth ® ) devices. As a
result, V AS 5054 A are not included as a diagnostic interface choice
during the ODIS Service installation routine on Windows 10 devices.
Please share the above information with all users!
Page 18 of 19
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
14.0 – Warranty Registration
A formal registration process for warranty coverage is not necessary.
The device serial number was automatically registered with the US/CDN market service provider for
warrantable repairs at the time of purchase.
In case of warranty repair requests, please provide the serial number of the device to the DSS consultant
at the toll-free number listed in Section 15.0.
15.0 – Windows 10 Familiarization
Service personnel that are not familiar with Windows 10 should refer to the information resources included
with the device.
Go to: Windows Start > Get Started > Browse topics. Then select a topic.
16.0 – Malfunctions and Support
All VAS 6150D are tested before leaving the factory. Selected components and numerous quality
control inspections ensure high reliability of your new diagnostic laptop.
Should performance or functional issues occur after placing the device into service, please attempt to
identify and localize as accurately as possible. Try to determine if the symptom is a result of the
Panasonic CF-54 laptop hardware, Windows operating system, ODIS Service software or
dealership network (for internet connectivity). Then proceed as follows:
•
Review the latest Service Information and FAQ documents in the Diagnostic Device Hardware
& Windows document subcategory of the Vehicle Diagnostics section in ServiceNet. The issue
may be previously known and a resolution already published.
•
For ODIS Service diagnostic software functional issues, review the latest Service Information
and FAQ documents in the ODIS Service document subcategory of the Vehicle Diagnostics
section of ServiceNet. The issue may be previously known and a resolution already published.
•
If it is not possible to resolve the issue with the aid of the ServiceNet documents, contact:
VWGoA Diagnostic Systems Support (DSS): 1-888-896-1298
Page 19 of 19
© 2017 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: AHW-17-13
Replacement Service Bulletin Number:
MFR Communication Date: 2017-08-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.