NHTSA ID Number: 10122758
Manufacturer Communication Number: AOS-12-16
TSB/Document Date: 2017-11-08
Summary
This document describes the update installation of ODIS Service DVD Version 1.1.1. Important prerequisites and conditions must be fulfilled prior to this update installation. As a result, please read this document in its entirety before proceeding. We recommend printing these instructions. Check boxes are provided to note the fulfillment of Prerequisites and the completion of each instruction Section.
Service Information
Offboard Diagnostic Information System Service (ODIS Service)
Subject: ODIS Service Update Installation V1.1.1 - Installation
Instructions
Number: AOS-12-16
Date: October 12, 2012
1.0 – Introduction
This document describes the update installation of ODIS Service DVD Version 1.1.1.
Important prerequisites and conditions must be fulfilled prior to this update installation. As a result, please
read this document in its entirety before proceeding.
We recommend printing these instructions. Check boxes are provided to note the fulfillment of
Prerequisites and the completion of each instruction Section.
Notes:
• This update installation should be performed by the ODIS Service Administrator or IT
Professional designated prior to the preparation and installation of ODIS Service V1.0.9.
• Perform all instruction steps in the exact order given. Heed all Prerequisites and Notes!
• The ODIS Service Installation – “Phase 1” and “Phase 2” documents referenced in these
instructions are posted in the Workshop Equipment > ODIS Service > Service Information
section in ServiceNet.
• Load and configure software in an area that is quiet, clean, and without distraction or interruption.
• Depending on device and device CD/DVD drive condition, allow at least 45 minutes for each update
installation and configuration.
• If you need assistance with these instructions, please contact Audi
DTSS at: 1-888-896-1298.
• For misplaced or damaged DVDs please contact Arvato Corporation: www.audi.techliterature.com.
2.0 – License File Prerequisites
This update installation requires reinstallation of the device-specific license file that was requested, saved
and installed during the ODIS Service V1.0.9 installation process.
The prerequisites below are based on the Device ID folder and license file backup method suggested in
Section 5.0 of the ODIS Service (V1.0.9) Phase 2 - Software Installation & Configuration
Instructions. If an alternate method of device ID and license file management was used, act accordingly
to retrieve the saved license file.
Prerequisites:
Note the Device ID assigned to the diagnostic device during the ODIS Service (V1.0.9) Phase 1 –
Preparation & License Request instructions.
Folder with license file copied to Windows desktop or other location on diagnostic device as per
Section 5.0 of the ODIS Service (V1.0.9) Phase 2 instructions.
Optional: Original or backup USB flash drive with Master List and Device ID folders with
license files on hand.
Page 1 of 18
ver1.4
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
Note:
If the device-specific license file was not saved or backed-up as specified in Section 5.0 of the Phase
2 instructions, Do Not attempt to perform this update installation! In this case, re-request delivery of the
license file using the ODIS Service (V1.0.9) Phase 1 - Device Preparation & License Request
Instructions.
Proceed with this update installation only when the device-specific license file is available!
License File Prerequisites completed
3.0 – Update Installation
Prerequisites:
ODIS Service V1.0.9 previously installed.
VAS 5052A / 6160: We recommend connecting USB mouse and keyboard for easier input.
ODIS Service Update Installation DVD Version 1.1.1 – Order No. 003.5002.02.21 on hand.
Note the device platform: VAS 5051B console, VAS 5052A / 6160 tablet or VAS 6150X laptop.
Diagnostic device must have functioning CD/DVD drive and USB, plugged in to power adapter and
booted to Windows® desktop.
3.1 – Uninstall ODIS Service V1.0.9
All ODIS Service V1.0.9 data must be completely uninstalled prior to the update installation of ODIS
Service V1.1.1. Proceed with uninstallation as follows:
1. From the Windows desktop, go to Start > Programs/All Programs > Offboard Diagnostic
Information System Service > Offboard Diagnostic Information System Service uninstallation
program. When the confirmation prompt appears, click Next.
2. Optional: From the Windows desktop, go to Start > Settings > Control Panel > Add or Remove
Programs. Select Offboard Diagnostic Information System Service from the program list, and click
on Change/Remove. When the confirmation prompt appears, click Next.
3. Delete all existing data by placing a checkmark next to all selections as illustrated below, then click
Next:
Page 2 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4. Click Finish:
5. Click Yes: The device will automatically restart.
Uninstallation steps completed
3.2 – Update – Software & License Installation
1. Insert the ODIS Service installation DVD V1.1.1 into CD/DVD drive.
2. From the Windows desktop, click My Computer:
3. Open the CD/DVD directory ODIS (E:):
4. Wait while the directory contents are read. Double-click OffboardDiagSetup-Service_1…:
5. Confirm English (US) is highlighted. Click OK.
Page 3 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
6. Click Next:
7. No action needed. Click Next:
8. Click Yes:
9. No action needed. Click Next:
Page 4 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
10. Add English (GB) and Deutsch (DE) user interface languages (and others if desired). Click Next:
11. Select the applicable diagnostic device platform from the dropdown menu as follows:
• VAS 5051B console: Select VAS 5051B
• VAS 5052A tablet: Select VAS 5052A
• VAS 6150X laptop & VAS 6160 tablet: Select Standard PC/notebook
Click Next:
12. Select the applicable diagnostic (connection) interface from the dropdown menu as follows:
• VAS 5051B console: Select VAS 5051B with diagnostic cable
• VAS 5052A tablet: Select VAS 5052A with radio head VAS 5054A
• VAS 6150X laptop: Select Notebook/PC with radio head VAS 5054A
Click Next:
Page 5 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
13. On diagnostic laptops and tablets only, a Bluetooth interface alert window appears. Click Next:
Notes:
• Steps 14 through 17 describe the retrieval and installation of the device-specific license
file.
• The license file must be retrieved from the folder saved on Windows desktop or other location
on the diagnostic device, OR the original or backup USB flash drive.
• Due to an application translation error, the license file is referenced in the following screenshots
as a “certificate file”.
14. Ensure Copy certificate to the installation folder is checked. Click Search:
15. Navigate to the Windows desktop or alternate location if applicable. Locate and open the folder
containing the saved license file.
Optional: Insert the original or backup USB flash drive with Master List and Device ID folders into an
open USB port. Open the USB flash drive directory and locate the applicable Device ID folder. Open
the License subfolder containing the saved license file.
Continued… 7/
Page 6 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
16. Select / highlight the license (.dat) file, then click Open (as illustrated below):
Note:
Do Not double click on the license file in its saved location!
17. Ensure the license file is copied to the installation window: Click Next:
18. Confirm installation of Virtual keyboard as desired, i.e.: for VAS 5052A and 6160 tablets. Click Next:
Page 7 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
19. No action needed. Click Next:
20. Wait while several different phases of file installation take place:
21. If a “DesktopLinkHwConfiguration” setup message appears, click No:
22. Click Finish: Then close the ODIS (E:) directory Window.
Software & License Installation steps complete
Page 8 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
3.3 – Update – Post Setup Diagnostic Data Installation
1. From the Windows desktop, locate and click the DiagStarter…. Icon:
2. Select Offboard Diagnostic Information System:
3. Wait while the program starts:
4. If the ODS9004E Infrastructure - Mirror Server2 error message appears, click OK:
5. The first time ODIS Service is started after a new installation, the PostSetup - Configuration data
installation process (that installs diagnostic data) must be performed. Click Select local directory:
Page 9 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
6. Expand [+] the My Computer and ODIS (E:) directories. Select / highlight the postsetup subdirectory
folder and click OK:
7. Confirm target for postsetup data: ///E:/postsetup and click the blue Forward Arrow button:
8. The postsetup diagnostic data on disc is summarized. Click the blue Forward Arrow button again:
Page 10 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
9. Wait while the diagnostic data installation takes place. Installation takes approx. 30 minutes:
10. At the conclusion of file installation the ODS9004E Infrastructure - Mirror Server2 error message
may appear: Click OK:
11. Click Cancel:
The ODIS Service application will restart and display a Release Notes window.
12. Remove the ODIS Service Update Installation DVD from CD/DVD drive and store in a safe place.
Post Setup Diagnostic Data Installation steps completed
4.0 – Post-Setup Configuration
The following subsections describe ODIS Service configuration using the Administration (Admin)
operating mode. The Admin configuration steps that follow must be performed prior to placing the
updated diagnostic device back into service. All Admin settings can be changed at any time.
After selecting any of the tabbed sections in the Admin function, click Help > Online Help to view a
description of that section’s contents:
Page 11 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.1 – Administration - General
The following subsection describes ODIS Service configurations using the Admin > General operating
mode.
1. From the Welcome to Diagnosis main screen, select the Admin operating mode: The general tab is
displayed first by default.
4.1.1 – Brand Design
The brand logo and user interface colors are configured with the Brand design function.
1. Select Brand design and choose the desired brand theme from the dropdown menu. Click Save /
Yes:
Page 12 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.1.2 – Language
The language displayed by the user interface is configured with the Language function. The available
languages are those selected in addition to English (US) at the start of the software installation process.
1. Select Language: Chose the desired language from the dropdown menu. Click Save / Yes:
4.1.3 – Updates
The update schedule for incremental software and diagnostic data updates via a network connection is
configured with the Update function.
1. Select Update: Review the available update schedule settings:
Page 13 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2. Configure the update cycle and time appropriate for your facility: Place check marks in the days
desired (We recommend checking all days). Click Save / Yes:
Note:
When incremental updates are available via a network connection, update prompts appear in
accordance with your configured schedule whenever ODIS Service is started or shut down. Always
heed the size and estimated download times of available updates and schedule them
accordingly!
4.1.4 – Keyboard
If desired, switch the virtual keyboard on or off as desired for the applicable diagnostic device.
1. Select Keyboard settings: If desired, place a checkmark next to Use the virtual keyboard. Click
Save / Yes:
Page 14 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.1.5 – Dealer Data
If desired, configure the name of the dealership to appear in the saved diagnostic logs.
1. Select Dealer data: Enter the name of the dealership in the Facility ID entry field (do not exceed 100
characters including spaces). Click Save / Yes:
4.2 – Administration - Support
The following subsection describes ODIS Service configurations using the Admin > Support operating
mode.
1. From the Admin operating mode main screen, select the Support tab: The Contact data section is
displayed first by default:
Page 15 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.2.1 – Contact Data
Contact information is saved as necessary for Support button requests.
1. Fill in all pertinent contact details. Ensure a valid email address is entered: Click Save / Yes:
4.2.2 – Email Outbox Server
The Email Outbox Server - Connection parameters that are specific to the dealership network must
be configured before using the Support button.
ATTENTION!
• If you are unaware of the connection parameter details required here, ask the
dealership systems/email administrator or IT Professional for assistance!
• Email server types and their connection parameters are always specific to each
dealership network. As a result, DTSS consultants cannot assist with specific advice!
1. Select E-mail outbox server: Select and/or fill in all information as applicable and specific to the
dealership network. Click Save / Yes:
Page 16 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.3 – Administration - Connections
The following subsection describes software configuration using the Admin > Connections operating
mode.
1. From the Admin operating mode main screen, select the Connections tab. The Brand settings data
section is displayed first by default.
4.3.1 – Brand Settings Data
The connection to VWAG Group systems (to transmit GFF logs, etc.) is configured via Brand settings.
1. Change the default Connection type in the dropdown menu(s) from CPN to Internet: Click Save /
Yes:
Page 17 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.3.2 – Mirror Server 2
The connection to the URL for incremental online updates is configured via Mirror Server 2.
Note:
The Mirror Server 2 URL that supports online updates for the US/CDN market was automatically
configured here during the license installation. The following step simply confirms the proper URL.
1. Select Mirror Server 2
2. Confirm the Mirror Server URL: https://mirrorserver2.vwhub.com/dav/:
Post Setup Configuration steps completed
All Update Installation steps completed
Page 18 of 18
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: AOS-12-16
Replacement Service Bulletin Number:
MFR Communication Date: 2012-10-12
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.