Quick tip
Date: Month 5-11, 2014

Version 1.0
Title: RMT 300 quick install instructions.

Kit contents: 1 radio.
Additional parts required: Adaptor harness 7L0051445A, Antenna adapter 000051541B, wire
terminal 000979133E, splice connector 000979943.

Page 1 of 3

ver1.2

© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Adapter harness set up:
Red/white wire

Pin 7

Brown wire

Pin 8

Red wire

Pin 4

Green/grey

Pin 2

Grey/blue

Pin 6

Yellow

Pin 5

Note: Yellow wire must be added to harness (000979133E) and spliced to the red/white wire,
splice the Red wire fused 15 power circuit (12V power point), splice Grey/blue wire to the
illumination 58d circuit.

Page 2 of 3
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Step 1: Connect adapter harness to vehicle harness. Connect antenna adaptor the antenna
cable.

Step 2: Install radio and reinstall trim turn ignition on and enter theft lock code. Test all
features of the radio (see owner’s manual for features and operation)

Page 3 of 3
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.