PERFECT DELIVERY INSPECTION (PDI)

2015

TT/TTS Coupe and Roadster/TT RS

Audi Technician Report

Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

All items must be completed prior to customer delivery by an Audi
technician
**Refer to the Special functions tab of ODIS Diagnosis using GFF
for the PDI function tests
**Audi recommends using an Audi approved battery charger to
prevent excessive battery discharge during inspection
Open Campaigns/Updates

Exterior
 Test windshield washers for aim and function
 Turn on headlights and test headlamp washers (if equipped)
 Test exterior lighting functions
 Check key functionality: Including seat memory (if applicable);
verify vehicle starts and runs with all keys; verify all doors
manually and remotely lock and unlock with all keys

 Check Elsa for open campaigns and updates. Perform
campaigns not requiring SVM if applicable. Campaigns
requiring SVM should only be performed after the vehicle has
been taken out of transport mode

Interior

Battery Inspection

 Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting

 Check battery clamps for proper torque. Re-torque if required

 Verify operation of all interior lights

 Install the headlight washer fuse

 Mirrors: Inspect folding, adjustments, RH tilt in reverse, and
memory (if equipped)

 Check the battery prior to starting engine with MCR340A.
Record MCR340A code: _________________ or attach printout

 Check operation of all switches: Locks, windows, seat adjustment, and child safety features

 Inspect operation of lighter, aux. outlet under armrest and rear
outlet

Transport Mode Deactivation, DTC check, set service reminder

 Verify operation of all front and rear seat belts and latches

 Deactivate vehicle transport mode (via Special functions –>
Service work –> 19-Transport mode activating/deactivating )

 Check horn operation

 Set service reminder (via Special functions –> Service work –>
17-PDI-resetting SRI at PDI, counter reset, etc.)

 Passenger side airbag: Verify operation of Passenger Occupant
Detection System

 Deactivate the anti-theft function for the Navigation DVD using
the Scan Tool. Follow the process outlined in TSB 2013790

Radio

 Perform an SVM specified /actual comparison (via Special
functions ->Software Version Management (SVM))

 Verify operation of AMI or aux. input

 Verify operation of CD changer (if equipped)

 Perform any campaign update requiring SVM at this time
(follow instructions listed in campaign documentation)

 SD card slot: Insert SD card and test function (Test all SD card
slots as equipped)

Under the Hood Fluid Check and Inspection

Audi Navigation plus (if equipped)

 Check all fluid levels and top off if necessary

 Verify and set Language and Measurement Units in Setup/
Settings menu

 Check engine oil level – fill oil to the max level when the vehicle
is at operating temperature
Trunk Inspection
 Verify emergency repair tools are installed securely in trunk
tool kit

 Set clock and date to local time/date using correct format
 Navigation location: Set dealership location (for following back
to dealership during road test)
 Voice Activation (if equipped): Press the “Talk” button and
verify several commands

 Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit

Effective 4-28-2014-US
Version 1.0

1 of 2

PERFECT DELIVERY INSPECTION (PDI)

2014 TT/TTS Coupe and Roadster/TT RS | Audi Technician Report

On-Hoist Inspection

Road Test (continued)

 Check underside of vehicle for fluid leaks and loose components

 Verify quality of radio reception in AM/FM/SAT bands

 Check steering, boots, brake system, hoses, tires and wheels
for damage

 Cruise control verify all functions

 Remove suspension blocks (if installed)

 Verify rear spoiler functionality
 Climate control: Check all functions and verify proper A/C cooling

 Inspect wheel bolts for proper torque using torque wrench
 Install wheel bolt covers and center caps as supplied
 If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2015 Normal Load Condition Tire Pressure
Table” posted on ServiceNet. If going to stock, set to maximum
recommended tire pressures listed on the B-pillar doorjamb,
and store tire pressure values in Car/System menu

 Front seat heating (if equipped): Inspect for proper operation
 Navigation function (if equipped): Activate NAV and follow
directions back to dealership
 Parking brake: Apply and verify hold and release
Post-Road Test Inspection

Road Test

 Interrogate fault memory using the Scan Tool and print
Diagnostic Log

 Check for squeaks, rattles, and wind noise

 Record final mileage on checklist and sign checklist

 Test operation of folding power top (Roadster)

 Ensure the yellow tire pressure tag is installed on steering
wheel

 Test power wind deflector (Roadster)
 Verify function of Audi parking system rear
 Verify engine performance and acceleration
 Verify transmission operation including shift paddles
 Check steering/tire alignment
 Test drive vehicle applying brakes several times (at least 4
times) at 20 mph (35 km/h) to clean brake rotors. Check for
abnormal noise/vibration/pulsation

If Vehicle is for Showroom Display/Inventory Storage or Demo
Use:
 Install showroom charger to ensure battery remains charged at
all times
 Apply Inventory Maintenance Sticker
 Install standard wiper blades (if not already installed)

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Last 8 of VIN

Effective 4-28-2014-US
Version 1.0

Technician Signature

Completion Date

2 of 2