NHTSA ID Number: 10122275
Manufacturer Communication Number: QRG - 2014 Passa
TSB/Document Date: 2017-11-08
Summary
2014 Volkswagen
Passat Quick Reference Specification Book This document is an overview which covers multiple -Engine Codes -Fuel and Air Mixture, Additional Emissions Regulations -Ignition System -Additional Exhaust Regulation -Speed and Idle Control -Control Module and Output Signals -Fuel and Air Ratios Control Module -Ignition System -Additional Emissions Regulations
2014 Volkswagen
Passat
Quick Reference Specification Book
Table of Contents
DTC Chart........................................................................ 1
Engine Code CPKA, CPRA...................................................1
Fuel and Air Mixture,
Additional Emissions Regulations......................................1
Ignition System.........................................................................8
Additional Exhaust Regulation..................................................9
Speed and Idle Control........................................................... 11
Control Module and Output Signals........................................12
Fuel and Air Ratios Control Module........................................13
Ignition System.......................................................................17
Additional Emissions Regulations..........................................18
DTC Chart...................................................................... 20
Engine Code CKRA.............................................................20
Fuel and Air Mixture,
Additional Emissions Regulations....................................20
Ignition System.......................................................................28
Additional Exhaust Regulation................................................29
Speed and Idle Control...........................................................32
Control Module and Output Signals........................................33
Fuel and Air Ratios Control Module........................................36
Additional Emissions Regulations..........................................45
DTC Chart...................................................................... 48
Engine Codes CBTA, CBUA................................................48
Fuel and Air Mixture,
Additional Emissions Regulations....................................48
Ignition System.......................................................................53
Additional Exhaust Regulation................................................55
Speed and Idle Control...........................................................56
Control Module and Output Signals........................................57
Fuel and Air Ratios Control Module........................................58
Ignition System.......................................................................60
Additional Emissions Regulations..........................................61
VW
Passat Quick Reference Specification Book
•
February 2014
i
DTC Chart...................................................................... 63
Engine Code CDVB.............................................................63
Fuel and Air Mixture,
Additional Emissions Regulations....................................63
Ignition System.......................................................................77
Additional Exhaust Regulation................................................81
Speed and Idle Control...........................................................82
Control Module and Output Signals........................................83
Fuel and Air Ratios Control Module........................................85
Additional Emissions Regulations..........................................89
ii
VW
Passat Quick Reference Specification Book
•
February 2014
DTC Chart
Engine Code CPKA, CPRA
Fuel and Air Mixture,
Additional Emissions Regulations
Error Message
Malfunction Criteria and
Threshold Value
P000A
Intake Camshaft Position Slow Signal change > 8 CRK ° for
Response Bank 1
> 2.9 Sec. and adjustment
angle ≥ 2.50 CRK rev.
P0010
Intake Camshaft Position
Actuator Circuit Open Bank 1
Signal voltage, > 4.7 - 5.4 V
P0011
Intake Camshaft Position
Actuator Circuit Open Bank 1
Signal voltage, > 4.7 - 5.4 V
P0016
Crankshaft Position –
Camshaft Position Correlation
• Permissible deviation < -11
CRK °
or
• Permissible deviation > 11
CRK °
P0030
HO2S Heater Control Circuit
Bank 1 Sensor 1
Heater voltage 4.70 - 5.40 V
P0031
HO2S Heater Control Circuit
Low Bank 1 Sensor 1
P0032
HO2S Heater Control Circuit
High Bank 1 Sensor 1
Signal current > 5.50 A
P0036
HO2S Heater Control Circuit
Bank 1 Sensor 2
Heater voltage, 4.50 - 5.50 V
P0037
HO2S Heater Control Circuit
Low Bank 1 Sensor 2
Heater voltage < 3.00 V
P0038
HO2S Heater Control Circuit
High Bank 1 Sensor 2
Heater current, > 2.70 - 5.50 A
P0068
MAF vs Throttle Position
Correlation
Plausibility with fuel system
• Load calculation < -22%
Plausibility with fuel system
• Load calculation > 22%
P0070
Ambient Air Temperature
Sensor Circuit
Ambient air temperature
< -50 °C
VW
Passat Quick Reference Specification Book
•
February 2014
DTC Chart
DTC
1
DTC
Error Message
Malfunction Criteria and
Threshold Value
P0071
Ambient Air Temperature
Sensor Range/Performance
• Difference in value between
ECT and AAT at engine start
(depending on engine off
time) > 25 K
and
• Difference in value between
AAT and IAT at engine start
(depending on engine off
time) > 25 K
P0072
Ambient Air Temperature
Sensor Circuit Low
Ambient air temperature
> 77 °C
P0087
Fuel Rail/System Pressure Too Low
• Fuel trim activity 0.90 - 1.15
• Pressure controller activity
> 2 MPa
• Difference between target and
actual pressure > -16.4
P0100
Mass Air Flow Circuit Fault
MAF sensor signal 0 µs
P0101
Mass Air Flow Circuit Range/
Performance
Mass air flow vs.
• Upper threshold model > 60 to
800 kg/h
• Lower threshold model < 0 to
400 kg/h
• Load calculation > 18%
• Fuel system < -18%
P0102
Mass Air Flow Circuit Low
Input
MAF sensor signal < 66 µs
P0103
Mass Air Flow Circuit High
Input
MAF sensor signal > 4500 µs
P0106
Manifold Absolute Pressure/
Barometric Pressure Circuit
Range/Performance
• Difference of boost pressure
signal vs altitude sensor
signal > 230 hPa
or
• Difference of boost pressure
signal vs altitude sensor
signal < -130 hPa
P0111
Intake Air Temperature Sensor • Difference in value IAT - ECT
1 Circuit Range/Performance
@ engine start (depending on
engine off time) > 25° C
• Difference in value IAT AAT @ engine start > 25° C
(depending on engine off time)
P0112
Intake Air Temperature Sensor IAT > 141.0° C
1 Circuit Low Input
2
VW
Passat Quick Reference Specification Book
•
February 2014
Error Message
Malfunction Criteria and
Threshold Value
P0113
Intake Air Temperature Sensor IAT < -46° C
1 Circuit High Input
P0116
Engine Coolant Temperature
Sensor 1 Circuit Range/
Performance
• No change on signal < 2 K
or
• Signal in range ≥ 89° C with
no change and signal
≤ 110° C
P0117
Engine Coolant Temperature
Sensor 1 Circuit Low Input
ECT >140° C
P0118
Engine Coolant Temperature
Sensor 1 Circuit High Input
ECT < -40° C
P0121
Accelerator Pedal Position
Sensor 1/Accelerator Pedal
Position Sensor 2 Circuit
Range/Performance
• TPS 1 - TPS 2 > 6.30%
• Actual TPS 1 calculated value
> TPS 2 calculated value
• TPS 1 calc. value > 9.00%
P0122
Accelerator Pedal Position
Sensor 1/Accelerator Pedal
Position Sensor 2 Circuit Low
Input
Signal voltage < 0.20 V
P0123
Accelerator Pedal Position
Sensor 1/Accelerator Pedal
Position Sensor 2 Circuit High
Input
Signal voltage > 4.81 V
P0130
O2 Sensor Circuit Bank 1
Sensor 1
O2S ceramic temp. < 640° C
P0131
O2 Sensor Circuit, Bank 1
Sensor 1 Low Voltage
• VM > 1.75 V
• UN > 1.50 V
• IA or IP > 0.30 V
P0132
O2 Sensor Circuit, Bank 1
Sensor 1 High Voltage
• VM > 3.25 V
• UN > 4.40 V
• IA or IP > 7 V
VW Passat Quick Reference Specification Book
•
February 2014
DTC Chart
DTC
3
DTC
Error Message
Malfunction Criteria and
Threshold Value
P0133
O2 Circuit Slow Response
Bank 1 Sensor 1
Signal dynamic slope check
• O2S signal front vs. modeled
O2S signal ratio < 0.35 and
> 0.01
• Lower value of both counters
for area ratios L to R and R to
L ≥ 5 times
Oscillation check
• Lambda amplitude signal
> 20%
• Cycles > 8
• Time lambda > lambda
amplitude 400 m sec.
Delay check
• Delay modeled lambda signal
minus measured signal > 460
m sec.
• Cycles > 12
P0135
O2 Heater Circuit Bank 1
Sensor 1
• Heater duty cycle, >100%
• O2S ceramic temperature,
< 715 °C
• Time after O2S heater on 40
Sec
P0136
O2 Circuit Bank 1 Sensor 2
Malfunction
• Delta voltage one step at
heater switching > 2.00 V
• Number of checks ≥ 4
P0137
O2 Circuit Low Voltage Bank 1 Cold condition
Sensor 2
• Signal voltage, < 0.06 V for 3
Sec.
Warm condition
• Signal voltage < 0.01 V
• Reaction at closed loop
enrichment - no reaction
P0138
O2 Circuit High Voltage Bank
1 Sensor 2
Signal voltage > 1.08 V for > 5
Sec.
P0139
O2 Circuit Slow Response
Bank 1 Sensor 2
• EWMA filtered transient time
at fuel cutoff > 0.0 Sec.
• In voltage range of 201 - 401
mV
• Number of checks, ≥ 3
P013A
O2 Sensor Slow Response
Rich to Lean Bank 1 Sensor 2
• EWMA filtered max differential
transient time at fuel cutoff ≥
0.65 Sec
• Number of checks ≥ 1
4
VW
Passat Quick Reference Specification Book
•
February 2014
DTC
Error Message
Malfunction Criteria and
Threshold Value
O2 Circuit No Activity
Detected Bank 1 Sensor 2
Signal voltage
• Signal voltage, 0.40 - 0.60 V
for > 3 Sec.
Internal resistance
• > 40000 ohm
P0141
O2 Heater Circuit Bank 1
Sensor 2
Heater resistance, 702 - 5250
Ohm
P0142
O2 Sensor Circuit Bank 1
Sensor 3
• Delta voltage one step at
heater > 2.0 V
• Number of checks, 4
P0143
O2 Sensor Circuit Low Voltage Cold/Warm condition
Bank 1 Sensor 3
• Signal voltage < 0.06 V for
> 3 Sec
P0144
O2 Sensor Circuit High
Voltage Bank 1 Sensor 3
Signal voltage > 1.08 V for
> 5 Sec.
P0145
O2 Sensor Circuit Slow
Response Bank 1 Sensor 3
• EWMA filtered transient time
at fuel cutoff > 1.2 Sec
• In voltage range of 201.2 401.4 mV
• Number of checks, 3
P0146
O2 Sensor Circuit No Activity
Detected Bank 1 Sensor 3
• Signal voltage 0.40 - 0.60 V
for > 3 Sec.
• Internal resistance
> 40000 Ohm
P0147
O2 Sensor Heater Circuit
Bank 1 Sensor 3
Heater (ECM internal)
resistance 792 - 4560 ohm
P0169
Incorrect Fuel Composition
• Fuel quantity incorrect
• Fuel correction factor incorrect
• Internal check failed
P0171
System Too Lean Bank 1
At idle
• Adaptive value > 5.02%
At part load
• Adaptive value > 21%
P0172
System Too Rich Bank 1
At idle
• Adaptive value < -5.02%
At part load
• Adaptive value < -21%
P0190
Fuel Rail Pressure Sensor
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: QRG - 2014 Passa
Replacement Service Bulletin Number:
MFR Communication Date: 2014-02-25
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




