NHTSA ID Number: 10122269
Manufacturer Communication Number: QRG - 2014 Golf-
TSB/Document Date: 2017-11-08
Summary
2014 Volkswagen
Golf, GTI, & Golf R Quick Reference Specification Book: This document is an overview which covers multiple -Engine Codes -Fuel and Air Mixture, Additional Emissions Regulations -Ignition System -Additional Exhaust Regulation -Speed and Idle Control -Control Module and Output Signals -Fuel and Air Ratios Control Module -Additional Emissions Regulations
2014 Volkswagen
Golf, GTI, & Golf R
Quick Reference Specification Book
Table of Contents
DTC Chart........................................................................ 1
Engine Codes CBFA..............................................................1
Fuel and Air Mixture,
Additional Emission Regulations........................................1
Ignition System.........................................................................9
Additional Exhaust Regulation................................................ 11
Speed and Idle Control...........................................................13
Control Module and Output Signals........................................13
Fuel and Air Ratios Control Module........................................16
Additional Emissions Regulations..........................................19
DTC Chart...................................................................... 21
Engine Codes CCTA............................................................21
Fuel and Air Mixture,
Additional Emission Regulations......................................21
Ignition System.......................................................................29
Additional Exhaust Regulation................................................31
Speed and Idle Control...........................................................32
Control Module and Output Signals........................................32
Fuel and Air Ratios Control Module........................................35
Ignition System.......................................................................38
Additional Emissions Regulations..........................................39
DTC Chart...................................................................... 40
Engine Codes CJAA ...........................................................40
Fuel and Air Mixture,
Additional Emission Regulations......................................40
Ignition System.......................................................................55
Additional Exhaust Regulation................................................56
Speed and Idle Control...........................................................58
Control Module and Output Signals........................................60
VW
Golf & GTI Quick Reference Specification Book • January 2014
i
DTC Chart...................................................................... 63
Engine Codes CRZA...........................................................63
Fuel and Air Mixture,
Additional Emission Regulations......................................63
Ignition System.......................................................................68
Additional Exhaust Regulation................................................71
Speed and Idle Control...........................................................72
Control Module and Output Signals........................................72
Fuel and Air Ratios Control Module........................................74
Additional Emissions Regulations..........................................76
DTC Chart...................................................................... 78
Engine Codes CBTA and CBUA..........................................78
Fuel and Air Mixture,
Additional Emission Regulations......................................78
Ignition System.......................................................................87
Additional Exhaust Regulation................................................89
Speed and Idle Control...........................................................90
Control Module and Output Signals........................................91
ii
VW Golf & GTI Quick Reference Specification Book • January 2014
DTC Chart
DTC Chart
Engine Codes CBFA
Fuel and Air Mixture,
Additional Emission Regulations
DTC
Error Message
Malfunction Criteria and
Threshold Value
P000A
Intake (A) Camshaft Position
Slow Response (Bank 1)
Signal change < 1.9 4.2° CRK/s
P0010
Intake (A) Camshaft Position
Actuator Circuit / Open (Bank
1)
Signal voltage, > 4.40 - 5.60 V
P0011
Intake (A) Camshaft Position
Timing - Over-Advanced
(Bank 1)
Target error (Stuck position)
> 6.8 - 8° CRK
P0016
Crankshaft Position Camshaft Position Correlation
Bank 1 Sensor A
• Permissible deviation < -11
CRK °
or
• Permissible deviation > 11 rev
P025A
Fuel Pump Open Circuit
Signal voltage 4.40 - 5.60 V
P025C
Fuel Pump Short to Ground
Signal voltage 2.15 - 3.25 V
P025D
Fuel Pump Short to B+
Signal current > 1.10 A
P0030
HO2S Heater Control Circuit,
Bank 1, Sensor 1, Open
Circuit
Heater voltage 2.34 - 3.59 V
P0031
HO2S Heater Control Circuit
Low, Bank 1, Sensor 1, Short
to Ground
Heater voltage < 2.34 V
P0032
HO2S Heater Control Circuit
High, Bank 1, Sensor 1, Short
to B+
Heater voltage > 3.59 V
P0036
HO2S Heater Control Circuit,
Bank 1, Sensor 2, Open
Circuit
SULEV Heater voltage, 4.50 5.50 V
P0036
HO2S Heater Circuit,
Bank 1, Sensor 3,
Open Circuit SULEV
Heater voltage 4.50 - 5.50 V
P0037
HO2S Heater Control Circuit
Low, Bank 1, Sensor 2, Short
to Ground
• SULEV Heater voltage < 3 V
• ULEV Heater voltage < 3 V
VW
Golf & GTI Quick Reference Specification Book • January 2014
1
DTC
Error Message
P0038
HO2S Heater Control Circuit
High, Bank 1, Sensor 2, Short
to B+
Heater current, > 2.70 - 5.50 A
P0042
HO2S Heater Circuit, Bank
1, Sensor 3, Open circuit
(SULEV)
Heater voltage 4.50...5.50 V
P0043
HO2S Heater Control Circuit
Low Bank 1, Sensor 2, Short
to Ground
• SULEV Heater voltage < 3 V
• ULEV Heater voltage < 3 V
P0044
HO2S Heater Control Circuit
High Bank 1, Sensor 2, Short
to B+
Heater current, > 2.70 - 5.50 A
P050A
Idle Air Control System
RPM Lower Or Higher Than
Expected
Out of range-low
• Engine speed deviation
< 80 RPM
Out of range-high
• Engine speed deviation
> 80 RPM
P0068
MAP/MAF – Throttle Position
Correlation
• Plausibility with fuel system
load calculation < 50%
• Plausibility with fuel system
load calculation > 50%
P0070
Ambient Air Temperature
Sensor Short to B+
Ambient air temp < 45.0° C
P0071
Rationality Check
• Difference value AAT - ECT
@ engine start (depending on
engine-off time) > 25K - 40K
and
• Difference value AAT - IAT
engine start (depending on
engine-off time) > 25K - 40K
P0072
Ambient Air Temperature
Sensor Circuit to Ground
Ambient air temperature > 87° C
P0087
Fuel Rail/System Pressure Too Low
• Pressure controller activity
> 4 MPa
• Fuel trim activity 1.30 - 16.00
• Difference difference between
target pressure vs. actual
pressure, > -16.38 mPa
P0088
Fuel Rail/System Pressure Too High
Fuel rail pressure > 13.9 MPa
2
Malfunction Criteria and
Threshold Value
VW
Golf & GTI Quick Reference Specification Book • January 2014
Error Message
Malfunction Criteria and
Threshold Value
P0089
Fuel Pressure Regulator 1
Performance
Actual pressure Deviation
• < 100 kPa
• > 100 kPa
P0100
Mass or Volume Air Flow A
Circuit
MAF sensor signal 0 µs
P0101
Mass or Volume Air Flow A
Circuit Range/Performance
• Mass air flow vs lower
threshold model < 12%
• Mass air flow vs upper
threshold < 12%
• Load calculation >21%. 23 for
ULEV only
and
• Fuel system (mult) 4500 µs
P0106
Manifold Absolute Pressure/
Barometric Sensor Range/
Performance
Boost pressure signal
• < Altitude sensor -210 hPa
• > Altitude sensor +230 hPa
P0111
Intake Air Temperature Sensor • Difference value: IAT - ECT
1 Rationality check ULEV only
@ engine start (depending on
engine-off time, > 25 - 40 K
and
• Difference value: IAT - AAT @
engine start (depending on
engine-off time), > 25 - 40 K
P0112
Intake Air Temperature Sensor IAT, < 45.80° C
1 Circuit Low Input
P0113
Intake Air Temperature Sensor IAT, < 45.80° C
1 Circuit High Input
P0116
Engine Coolant Temperature
Sensor 1 Circuit Range/
Performance. Only SULEV
Stuck high (140° C):
• No change of signal, < 1.5K
P0116
Engine Coolant Temperature
Sensor 1 Circuit Range/
Performance. Only SULEV
Stuck low (-40° C):
• No change of signal, < 1.5K
VW
Golf & GTI Quick Reference Specification Book • January 2014
DTC Chart
DTC
3
DTC
Error Message
Malfunction Criteria and
Threshold Value
P0116
Engine Coolant Temperature
Sensor 1 Circuit Range/
Performance. Only SULEV
Stuck in range
• 88.5 - 109.5° C
and
• No hange on signal, 1.5 K
P0116
Engine Coolant Temperature
Sensor 1 Circuit Range/
Performance. Only SULEV
• Difference value: ECT - AAT
@ engine start (depending on
engine off time) > 25...40 K
and
• Difference value: ECT - IAT
@ engine start (depending on
engine off time) > 25...40 K
P0117
Engine Coolant Temperature
Sensor 1 Circuit Low Input
Engine coolant temperature
> 140.30° C
P0118
Engine Coolant Temperature
Sensor 1 Circuit Open
Engine coolant temperature
< 39.80° C
P0121
Throttle/Pedal Position Sensor • TPS 1 - TPS 2 > 6.30%
A Circuit Range/Performance
and
• Actual TPS 1 calculated value
> actual TPS 2 calculated
value
or
• TPS 1 calculated value
> 9.00%
P0122
Throttle/Pedal Position Sensor Signal voltage < 0.20 V
A Circuit Low Input
P0123
Throttle/Pedal Position Sensor Signal voltage > 4.81 V
A Circuit High Input
P0130
O2 Sensor Circuit (Bank 1,
Sensor 1)
O2S ceramic temperature
< 640 °C
P0131
O2S Circuit, Bank 1, Sensor
1, Low Voltage
VM < 2 V
UN < 1.75 V
IA > 0.30 V
IP > 0.30 V
P0132
O2 Sensor Circuit Bank 1,
Sensor 1 High Voltage
VM > 3 V
UN > 4 V
IA > 1.5 V
IP > 1.5 V
4
VW
Golf & GTI Quick Reference Specification Book • January 2014
Error Message
Malfunction Criteria and
Threshold Value
P0133
O2S Circuit Bank 1, Sensor 1,
Slow Response
• O2S signal front vs. modeled
O2S signal ratio ≤ 0.35 and
> 0.01
• Cycles completed, > 12
• B8 ULEV II cycles completed
> 40
P0135
O2 Heater Circuit Bank 1,
Sensor 1
• Out of range-high
• O2S ceramic temperature,
< 715° C
and
• Heater duty cycle, 100%
• Rationality check:
• O2S ceramic temperature,
< 715° C
and
• Time after O2S heater on 40 s
• Out of range low:
• Difference between measured
calibration resistance in ECM
and set value, > 45 O
P0136
O2 Circuit Bank 1 Sensor 2
• Delta voltage one step at
heater switching > 2.0020 V
• Number of checks 10
P0137
O2 Circuit Low Voltage (Bank
1, Sensor 2)
• Cold condition, Signal voltage,
< 59.6 mV
• Warm condition, signal voltage
< 59.6 mV
• Reaction at closed loop
enrichment, no reaction
P0138
O2S Circuit Bank 1, Sensor 2,
High Voltage
Signal voltage > 1.26 V
P0139
O2S Circuit Bank 1, Sensor 2,
Slow Response
• EWMA filtered transient time at
fuel cutoff, > 0.4 s
• In voltage range, 401.4...201.2
mV
• Number of checks (initial
phase), > 3
• Number of checks (step
function), > 3
VW Golf & GTI Quick Reference Specification Book • January 2014
DTC Chart
DTC
5
DTC
Error Message
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Viscosity breakdown as measured in Kurt Orbahn test on 5W...
- As measured in Seq IX test under high load/torque conditions...
- Phosphorus Replacement Technology to help extend the life of...
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes*
- Meets or exceeds the following specifications: API SP/SN...
- Or one year, whichever comes first
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: QRG - 2014 Golf-
Replacement Service Bulletin Number:
MFR Communication Date: 2014-02-26
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT ADAPTIVE/MOBILITY
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




