NHTSA ID Number: 10122114
Manufacturer Communication Number: V581604 2039212
TSB/Document Date: 2017-11-08
Summary
To update required parts table.
Technical Bulletin
Model(s)
Year
Eng. Code
Trans. Code
VIN Range From
VIN Range To
Passat
2006 – 2010
All
All
All
All
Passat Wagon
2006 – 2010
All
All
All
All
CC
2009 – 2012
All
All
All
All
Condition
58 16 04 December 5, 2016 2039212 Supersedes Technical Bulletin 581603 dated June 13, 2016 to update the
Required Parts Table.
Corrosion on Rear Door in Trim Strip Area
Figure 1 (the red ellipses show the area which can be affected by the corrosion)
Note:
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures
Manual.
Documentation required per Warranty Policies and Procedures Manual.
For vehicles outside of the Limited Warranty Against Corrosion Perforation this Technical Bulletin is for
information only.
Page 1 of 11
© 2016 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Technical Background
Because of incomplete bonding of the trim strip (Figure 2, red circle) water can get between trim strip and door.
Because of water ingress, corrosion is possible in the area of the guide holes (Figure 1, red circles).
Figure 2 (the red circle shows the opening of the incomplete bonding)
Production Solution
Not Applicable.
Page 2 of 11
© 2016 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Service
1a. Repair Rear Door Only perform this operation if the total repair cost is 80% or less of the total replacement
cost.
Or
1b. Replace Rear Door
Step 2 needs to be completed regardless of a repair or replacement.
2. Replace the Trim strip and apply butyl sealer on trim strip:
1a. Repair the rear door as follows:
Disassemble the door according to the repair manual. See Repair Group 58 in Elsa
Remove the corrosion on the inner and outer door in the area of the guide holes using a pneumatic brush
grinder.
Note:
If through-corrosion (perforation) is not present, door replacement will only be accepted if it qualifies per the
Reimbursement Policy section of the Warranty Policies and Procedure Manual. This section provides important
guidelines when considering component repair vs. replacement options (the “80% rule”).
Apply a VOC compliant epoxy primer as an anti-corrosion treatment and primer to both sides of the door
(locally sourced).
Repaint the rear door according to Volkswagen
guidelines.
1b. Replace the rear door as follows:
Replace the door according to the repair manual. See Repair Group 58 in Elsa
Paint the rear door according to Volkswagen
guidelines.
Page 3 of 11
© 2016 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
2. Replace the Trim strip and apply butyl sealer on trim strip:
To avoid repeated water ingress, close the open areas on the trim strips in the end points of the adhesive tape
with butyl sealing cord (part number AKL 450 005 05 - Figure 3 and 4, red arrows).
Figure 3 (rear end of a trim strip)
Figure 4 (front end of a trim strip)
Page 4 of 11
© 2016 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Form two balls of butyl sealing cord (part number: AKL 450 005 05) per trim strip with a diameter of 4-5 mm.
Attach the butyl balls centrally in the end areas of the trim strip from the inside (Figures 5 and 6).
Figure 5 (rear trim strip area)
Figure 6 (rear trim strip area)
Page 5 of 11
© 2016 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
The open areas of the adhesive tape must be closed by pressing the butyl balls into the gaps of the tape
(Figure 7).
Figure 7 (front trim strip area)
Install the trim strip on the door according to the repair manual. See Repair Group 66 in Elsa.
Apply cavity wax on the inside of the door around the holes that the trim strip secures.
Assemble and reinstall the door according to the repair manual. See Repair Group 58 in Elsa.
Page 6 of 11
© 2016 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Warranty
Note:
Dealers may complete the repair as described without prior authorization (through a WISE Warranty Repair
Acceptance request).
Documentation required: Clear pictures, completed estimate and body shop invoice must be saved and kept
on file at the Dealership for audit purposes.
This bulletin applies for 1 door repair or replacement. If both doors exhibit the corrosion they should be
evaluated individually and claimed on separates lines. Total Body Painting Prep Time for both doors should be
claimed on the first line only.
Labor time units (TU), Material units (MU), and Material unit rate are correct at the time of publication. The
time units and/or material units may differ if the repair catalogue is updated. The information in the repair
catalogue applies, except for the open time items (labor operations ending in 99) which are calculated at
actual time multiplied by the body shop labor rate. The material allowance (Paint material price per unit) is
subject to change. Refer to WISE > Resource Center > Forms > Paint/Corrosion for the most current
forms.
This section is applicable for vehicles within the terms of Volkswagen
’s Limited Warranty Against Corrosion
Perforation. For vehicles outside the terms of the Limited Warranty Against Corrosion Perforation this section
is for information only.
This bulletin may be provided to outside shops to ensure the proper repair is completed.
Note:
Claim Processing
Utilize the attached form examples and pre-populated forms on WISE to assist with calculating the
reimbursement amounts. This will expedite the claim review process and reduce the time to pay the claim.
Note that miscalculations are subject to claim adjustment. You can email completed excel forms (in the excel
format) to paintcamp@vw
.com. The Paint and Corrosion Team will review your completed form(s) and adjust for
overlap on behalf of the dealer.
For the complete set of pre-populated Paint/Corrosion Claim Form templates associated with this Technical
Bulletin, refer to WISE > Resource Center > Forms > Paint/Corrosion.
Page 7 of 11
© 2016 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
Procedures Manual 1)
Model(s)
Year(s)
Eng. Code(s)
Trans. Code(s)
VIN Range From
VIN Range To
Passat
2006 – 2010
All
All
All
All
Passat Wagon
2006 – 2010
All
All
All
All
CC
2009 – 2012
All
All
All
All
SAGA Coding
Claim Type:
1601)
Damage
Service Number:
Code
5829
0003
HST
Damage Location
(Depends on Service
No.)
--
160 or 162
CC (357)
160 or 1622)
Passat Sedan and Passat Wagon
(3C*)
160 or 1622)
Parts Manufacturer
Repair
Please use the following part number in “Outside Materials” 4)
LACKMATF: Paint and Materials
MU @ $12 per unit
Epoxy Primer (Locally Sourced)
Claim Dollar Amount (MAX: $40)
Please use the following Labor Operation in “Outside Labor” 4)
Select the appropriate Labor Operation below:
- L0010000: External Painting-straight color
- L0020000: External Painting-metallic/2-layer
Claim Dollar Amount
- L0030000: External Painting-pearl color
Use this for all body repair in this bulletin:
- A0041000: Body Shop repair no paint
Claim Dollar Amount
Page 8 of 11
© 2016 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Replace
Please use the following part number in “Outside Materials” 4)
LACKMATF: Paint and Materials
MU @ $12 per unit
Please use the following Labor Operation in “Outside Labor” 4)
Select the appropriate Labor Operation below:
- L0010000: External Painting-straight color
Claim Dollar Amount
- L0020000: External Painting-metallic/2-layer
- L0030000: External Painting-pearl color
Use this for all body repair in this bulletin:
Claim Dollar Amount
- A0041000: Body Shop repair no paint
Causal Part:
L00#0000
Diagnostic Time 4)
GFF Time expenditure
01500000 = 00 TU max.
NO
Road Test
01210002 = 00 TU
NO
01210004 = 00 TU
Technical Diagnosis
01320000 = 00 TU
NO
Claim Comment: Input “As per Technical Bulletin 2039212” in comment section of Warranty Claim.
1)
For Vehicles outside the Limited Warranty Against Corrosion Perforation this bulletin is information only
2)
Corrosion claim vendor code will be the damage location.
3)
Labor Time Units (TUs) are subject to change with ELSA updates.
4)
Documentation required per Warranty Policies and Procedures Manual.
5)
See attachment “srt_reference_table.pdf” for labor time reference.
Page 9 of 11
© 2016 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Required Parts and Tools
Repair and Replace
Part number
AKL 450 005 05
Designation
Butyl sealing cord (Quantity 0.05)
Passat Sedan or Wagon (One of the following)
3C0 853 753 C 2ZZ
Rear Left Door Trim Strip
3C0 853 754 C 2ZZ
Rear Right Door Trim Strip
CC (One of the following)
3C8 853 073 B 2ZZ
Rear Left Door Trim Strip
3C8 853 074 B 2ZZ
Rear Right Door Trim Strip
Replace
Passat Sedan (One of the following)
3C5 833 055 H
Rear Left Door
3C5 833 056 H
Rear Right Door
Passat Sedan (Additional required parts, One of the following)
3C5 839 701 D 5AP
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: V581604 2039212
Replacement Service Bulletin Number:
MFR Communication Date: 2016-12-05
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Obd2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15 reset service, bidirectional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth obd2 scanner diagnostic tool ideal for diy's and private car owners
- Bidirectional Control for Quickly Locating Problems: The Bidirectional Scan tool allows you to send commands directly from your smartphone to your vehicle for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping Diy users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
- 15 Maintenance Resets: The current version introduces 15 popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us check compatibility.
- Wide Compatibility CANFD & FCA
Autoauth: Compatible with GM, Ford
, Toyota
, Chrysler
, Honda
, Mazda
, Nissan
, Mitsubishi
, Hyundai
, KIA
with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA
cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us to confirm compatibility before purchase. - Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent AutoVIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time data. Data logging/reporting is available for playback and further analysis.
- No Annual Fees & 2026 Upgraded CAN FD: Why pay $199/year or more for updates? The 2026 newest Kingbolen K7 obd2 scanner features have been upgraded to Lifetime Updates without subscription fees, saving you significant costs in the long run. K7 scan tool also adds the CAN FD protocol for the latest GM models (2019+), enabling faster data transfer, reducing the risk of undetected errors
- 2026 Newest Top-tier Car Scanner: Kingbolen K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Test, ECU Online/Offline Code, 31+ Resets, PMI for Ford
, Lincoln
, Mazda
, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA
AutoAuth - OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with Auto Vin can do one-click to scan ECUs on most of vehicles, like pcm, ecm, eps, bcm, tpms, sas, a/c system... to read/clear code, view live data, freeze frame, read ecu info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
- Bidirectional Test/Active Test & ECU Code: Stop guessing and start fixing. Bidirectional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to save money and time on car repairs when performing complex maintenance and repair
- 31 Reset Functions: Avoid expensive dealership visits for simple services. Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional diagnostic scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Code, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. Note: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase
- 【Cost-effective Diagnostic Scan Tool】Lifetime updates without fee, No subscription fee required, No IP restrictions, Ediag Elite bluetooth scanner stands out. It can perform in-depth Full System diagnostics,15+ Reset Services, powerful Active Test, CANFD & FCA
AutoAuth. Connect your phone via Bluetooth for diagnosis, providing a faster, smarter and smoother diagnostic experience. Easy to put in pocket, convenient to carry, keep track of the car's status anytime, anywhere. Best bang for your bucks. - 【15+ Reset Service, Easy Problem Solving】 KINGBOLEN Ediag Elite obd2 scanner diagnostic scan tool comes with 15+ professional reset functions, including: Oil Reset, ABS Bleeding, Injector Code, SAS Reset, TPMS Reset, BMS Reset, AFS Reset, Sunroof Calibration, Brake Reset and more special functions in system diagnose menu. The ideal bluetooth scanner for mechanics and DIY enthusiasts, which can save unnecessary maintenance costs and significantly shorten repair time.
- 【Comprehensive Full Systems Diagnostic】 The Ediag Elite obd2 scanner bluetooth supports full system In-Depth diagnosis. It can read/clear fault codes, read real-time data/freeze frame, module information, and perform testing and reset functions for ECM, BCM, ABS, SRS, TPMS, TCM, BMS, SAS, A/C & RTM systems ect. It works with most car models after 1996, cover more than 150+ car brands. Supports 22 global languages for your convenience(EN, FR, ES, DE, IT, RU, PT, JP, TU...)
- 【Powerful Bidirectional Scan Tool & Active Test】 The obd2 code reader for Ediag Elite can perform real time active test that can send commands to the vehicle’s ECU to drive the actuators to work, such as turn on the radiator fan, modulate the throttle, open/close windows, etc. It can help you quickly find out the bad components and the cause of the fault, which can save you a lot of time. With BT 5.2 wireless connectivity, you can enjoy wireless diagnostics up to 33 feet.
- 【FCA
AutoAuth & CANFD Compatibility】 Ediag Elite scan tool offers support with FCA
Gateway Access, allowing you to perform protected functions on FCA
vehicles, including Chrysler
, Dodge
, Jeep
, Alfa Romeo
, Fiat
vehicles, etc.(Note:just allows you to access the FCA
, but need to have your own FCA
account) Supports the CAN-FD protocol, provide high-speed vehicle diagnostic communication and data transfer, working perfectly on GM vehicles produced after 2020, saving $100 to buy a CAN FD adapter.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




