Loading...

NHTSA ID Number: 10121025

Manufacturer Communication Number: V151701_2045939

TSB/Document Date: 2017-10-31


Summary

Update procedure removing camshaft and rocker inspection and or replacement. Update part number suffix.


Technical Bulletin
Model(s)

Year

Eng. Code

Trans. Code

VIN Range From:

VIN Range To:

CC

2016 – 2017

2.0L

All

AN_GE515911

AN_HE506568

All

AX_GK000028

AX_HK010335

All

AX_GW089548

AX_HW513507

(CCTA)
Tiguan

2016 – 2017

2.0L
(CCTA)

Tiguan

2016 – 2017

2.0L
(CCTA)

Condition
15 17 01 January 18, 2016 2045939 Supersedes Technical Bulletin V151603 dated November 23, 2016 to
update procedure.
MIL ON – DTC P0011 and or P0016 Stored in ECM Fault Memory – Engine May Run Rough At Idle

One or more of the following fault codes may be stored in the ECM Fault Memory:

DTC

Description

P0011

Camshaft Position (Bank1) Timing over-advanced
or System Performance

P0016

Crankshaft Position-Camshaft Position Correlation
Bank 1 Sensor A

Technical Background
Wear of the camshaft bearing bridge can cause axial movement of the camshaft resulting in faults stored.

Production Solution
Improved valve train components implemented in production.

Page 1 of 5
© 2017 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Service
Procedure:
Inspect the camshaft bearing bridge and replace if necessary.

Camshaft Bearing Bridge Inspection
 Remove the camshaft bearing bridge according to the repair manual. Check the bearing bridge (camshaft
side) for damage (groove in bearing surface or lip protruding from bearing surface as shown in figure 1).
Note:
If the camshaft bearing bridge is not damaged this bulletin does not apply, reassemble engine and diagnose the
fault entries using Guided Fault Finding.

Figure 1) example of worn camshaft bearing bridge
 If the bridge is damaged as indicated in (Figure 1), replace according to the repair manual.
 Change engine oil and oil filter.

Page 2 of 5
© 2017 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Warranty
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
Procedures Manual 1)
Model(s)

Year(s)

Eng. Code(s)

Trans.
Code(s)

VIN Range From

VIN Range To

CC

2016 – 2017

2.0L

All

AN_GE515911

AN_HE506568

All

AX_GK000028

AX_HK010335

All

AX_GW089548

AX_HW513507

(CCTA)
Tiguan

2016 – 2017

2.0L
(CCTA)

Tiguan

2016 – 2017

2.0L
(CCTA)

SAGA Coding
Claim Type:

Use applicable Claim Type 1)

Service Number:

1505

Damage
Code
0010

Parts Manufacturer

HST

Damage Location
(Depends on Service No.)

--

Use applicable when
indicated in Elsa (L/R)

Tiguan, CC

WWO 2)

Tiguan
Labor Operation 3) : Charge Battery

27068950 = 10 TU

Labor Operation 3) : Camshaft Adjuster Remove and
Reinstall

15841990 = 30 TU

Labor Operation 3) : Chain Housing Cover Remove
and Reinstall (upper)

15331940 = 90 TU

Labor Operation 3) : Change Oil and Oil Filter

17011799 = 50 TU

Page 3 of 5
© 2017 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
CC
Labor Operation 3) : Charge Battery

27068950 = 10 TU

Labor Operation 3) :Camshaft Adjuster Remove and
Reinstall

15841968 = 30 TU

Labor Operation 3) : Chain Housing Cover Remove
and Reinstall (upper)

15331918 = 90 TU

Labor Operation 3) : Change Oil and Oil Filter

17011799 = 50 TU

Causal Part: Bearing Bridge

06H 103 144*
Diagnostic Time 4)

GFF Time expenditure

01500000 = 30 TU

YES

Road Test

01210004 = 10 TU

YES

Technical Diagnosis

01320000 = 00 TU

NO

Claim Comment: Input “As per Technical Bulletin 2045939” in comment section of Warranty Claim.
1)

Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only

2)

Code per warranty vendor code policy.

3)

Labor Time Units (TUs) are subject to change with ELSA updates.

4)

Documentation required per Warranty Policies and Procedures Manual.

Page 4 of 5
© 2017 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Required Parts and Tools
Part No:

Part Description

Quantity

See ETKA

Engine Oil

Refer to fluid capacity table in
Elsa

06J 115 403Q

Oil Filter

1

N 910 967 01

Bolt

1

WHT 007 212

O-ring

1

06H 103 144*

Bearing Bridge

1

Tool Description

Tool No:

Midtronics Battery Tester/Charger

InCharge 940 (INC-940)
or
GRX3000VAS

VAS Diagnostic Tool

VAS 6150/X & VAS 6160/X and
ODIS Service with: current online updates

Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.

Document Control Revision Table
Instance Number

Published Date

Version Number

Reason For Update

2045939/2

1/18/17

V151701

Update procedure.

2045939/1

11/23/16

V151603

Original publication.

Page 5 of 5
© 2017 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

1

SaleBestseller No. 1
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
  • J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an...
  • All-in-One OEM Diagnostics: This J2534 ECU programming tool...
  • Proven Performance You Can Trust: Backed by over 10000 real...
  • Integrated Excellence, Always Up-to-Date: Featuring the...
  • Efficiency Meets Versatility: Engineered to support three...
SaleBestseller No. 2
TOPDON RLink J2534 OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, J2534-Pass-Thru for J2534/D-PDU/CAN-FD/DoIP, Supports 18+ Vehicle Brands, No OE Software Provided
  • [J2534 Pass-Thru Programmer] - TOPDON RLink J2534 is...
  • [All-in-One OEM Reprogramming and Diagnostics] - When...
  • [Tested, Trusted, and Proven for Accuracy] - TOPDON RLink...
  • [One-Click Installation, Continuous Updates] - The exclusive...
  • [Works with Windows Compatibility and OEM Software...

If the PDF is very large, it may not load in the preview below.

Download PDF [130.60 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: V151701_2045939

Replacement Service Bulletin Number:

MFR Communication Date: 2017-01-18

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: EQUIPMENT ADAPTIVE/MOBILITY

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



Bestseller No. 1
iCarsoft Auto Diagnostic Scanner POR V2.0
  • Scanner POR V2.0 with all obd2 services
  • Do the scanning for engine
  • Support OBDII/EOBD Ten Modes of Operation
SaleBestseller No. 2
iCarsoft Bidirectional Diagnostic Tool for Most Mercedes-Benz/Sprinter/Smart from 1996-2023 MB V3.0 2026 Version Up to 38 Service Full System OBD2 Scanner All Test AutoVIN Battery Test Free Update
  • 【Designed for Most Mercedes-BenzeBay logo, SprintereBay logo and Smart from 1996-2023】As every car model of Benz has its-owned specific car system and ECUs, not all models are equipped with a complete vehicle ECU, which may cause the scanner to be unable to perform all listed reset services on some models, or even completely incompatible. Like For SprintereBay logo's newer models, it support diagnostic functions only, lacking support for specialized service functions.. So please tell us the car's VIN and required service before purchase for compatibility check. You may also refer to the instructions in the eighth image of the main product photos to perform your inquiry.
  • 【Up to 38 Reset Services】MB V3.0 2026 Version diagnostic tool performs Up to 38 maintenance services - Oil Rest , SAS, EPB, ETC, D-P-F, TPMS, ABS, Suspension, Air Conditioner, Head Lamp, Body Stability, Engine Control, Seat, Fuel Pump, Air-Filter, Engine Idle, Door, Im-mo-bilizer, Injector Coding, Transmission Control, Miscellaneous, Adblue, BMS, Cluth, Water Pump, NOxSensor, Rain/Light Sensor, Start/Stop, Radar/Camera, Cylinder Shutoff Test, Speed Limit Assist, Control Unit Reset, Oxygen Sensor, Seat Belt, Cruise Control System, Turbocharger, Crankshaft, Language Setting and etc. (Tips: Please update the software after receiving the product to obtain new service functions)
  • 【OE-Level All System OBD2 Scanner】iCarsoft MB V3.0 (2026 Version) diagnostic scanner offers comprehensive OBDII services, allowing you to quickly scan all systems, including the Engine, ABS, SAS, SRS, TPMS, TCM, Fuel Pump System, ESP, EPB, EPS, Suspension, SCM, Adaptive Systems, and more. It supports functions such as reading and erasing codes, checking I/M readiness, viewing freeze frame data, performing O2 sensor tests, conducting on-board monitoring, testing the evap system, auto VIN retrieval, and reading both generic and specific codes, as well as DTCs and battery tests.
  • 【Bidirectional Scan Tool】iCarsoft MB V3.0 (2026 Version) Bidirectional scanner supports activate or control a vehicle system or component, allows commanding cars’ modules and receiving info from the ECU to perform active tests on individual components, including EVAP/ABS Motor Pump/Windows/Sunroof and more, to pinpoint fault causes & resolve issues,and allows you to re-learn certain components after making repairs or replacement.
  • 【Real Time Record & Graph View】iCarsoft MB V3.0 (2026 Version) can automatically record vehicle text history and identify vehicle information. Preserve real-time data information. View & Graph Live Data. Support Data Review and Print. Multi-language: English, German, Dutch, Spanish, French and so on. We promise to offer Lifetime updates (Lifetime free Update via PC), and confidence in products. We also provide 1 year warranty + extra lifetime hardware free repair if you need it in the future. We prioritize user experience & strive to meet your expectations. Please do feel free to reach out to us if you have any question or problem about the usage, our tech team will service you in time.
Bestseller No. 3
iCarsoft Bidirectional Scan Tool, CR Max OBD2 Diagnostic Scanner for All Vehicles, Full System 49 Resets+46 Extra Services, 40000+Active Tests,ECU Coding, Battery Registration, Oil Reset/ABS,CAN FD
  • WHY CHOOSE THE 2025 CR MAX -Upgrade the latest diagnostic capabilities for all vehicles after 1996: upgrade to 49+maintenance services; 46 extra specific functions; real all systems/all control modules diagnose; over 40K+ bidirectional actuation tests for diagnosing all control moduels of cars; Powerful full OBD2 Functions; built-in ECU Coding for BMWeBay logo/ AudieBay logo/ VWeBay logo/ RollsRoyce; Fr ee V.A.G Guide Function; Battery retistration for new battery adaptation and more. It covers all vehicle diagnostic services and some special professional vehicle maintenance servces, assists you to do home DIY vehicle maintenance or car repair as a pro technician.
  • NEWEST IN INNOVATION FULL OBD2 SERVICES- iCarsoft auto car diagnostic scanner compatible with CAN-FD, CR MAX can do it all-reads and clears trouble codes, ALL SYSTEM DIAGNOSIS such as engine, transmission, ABS and airbag etc. CR MAX code reader for all cars can perform I/M Readiness, Live Data, Freeze Frame, Vehicle Information, Monitor Test, On-Board Monitor, E vap System Test,O2 Sensor Test,DTC Library Lookup,etc. (Warm Tips: If you car is after 2023,please contact us for compatibility; 3. It comes with 16PIN OBD2 diagnostic adapter, please check your car diagnostic socket if it is 16pin socket, if your car is 14pin diagnostic socket please contact us for the solution.)
  • 49 RESET+ 46 SERVICES- Performs: Oil Reset, EPB,SAS,Throttle, D-P - F, Battery, ABS, Injector, TPMS, Suspension, AC, Head Lamp, Body Stablity, Engine, Tramsmission, Airbag, Seat, Door-Win-Roof, Fuel Pump, Door, E-G- R.+21 NEWEST SERVICES( Need update scanner)-AdBlue, Clutch, Crankshaft, High Voltage BatteryeBay logo, Cruise Control, NO xSensor, Rain Sensor, Stop And Start, Turbocharger, Head Up Display, Radar Camera, Vehicle Setup, Cyliner Misfire Check,Speedlimitassist, ControlUnitReset,OxygenSensor, Seatbelt. Extra 46+ extra services based on car brand.(Tips: Quantity of reset/ calibration fucitons are based on car system that your vehicle model has)
  • REVOLUTIONARY 40000+BIDIRECTIONAL ACTIVE TESTS: Upgraded CR Max scanner equip with numberous of actuational test items for covering all available vehicle control modules, no longer only do simple light test or window test like other scanners, performs hardware modules test and software control modules test for checking car units or new updated control moduels work well or not after maintenance/ repair/ re-installation/ control system updated (Example for Benz- Roller Sun Blind test; Backup Camera test ;Self-test; EPB test; Transport Mode test;Boost Pressure Positioner test; Fuel Pump test; AND MORE!!).(Warm tip: The available test items are based on control modules your car has)
  • ECU CODING+ BATTERY REGISTRATION- Powerful ECU Coding service for BMWeBay logo/MINIeBay logo/RollsRoyce / AudieBay logo/VWeBay logo/Seat/Skoda/BentleyeBay logo/BugattieBay logo/LamborghinieBay logo, Improves Engine Power Performance and Optimizes Fuel Efficiency and Match New Hardware Unit to car and Customized a comfortable Driving Modes and Fixes & Updates Original Software Bug. The battery test function for checking car battery health, perform battery reset (BMS ) for replacing a damaged or aging car battery with a new one and register new battery to car ECU

Last update on 2026-06-11 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Share to...