Loading...

NHTSA ID Number: 10120160

Manufacturer Communication Number: Update Bulletin

TSB/Document Date: 2017-10-21


Summary

UPDATE Technical Bulletin (Fuel line issues): This update has been proactively released to prevent an audible fuel line resonance generated from the normal operation of the fuel delivery system perceived as a rattling noise under certain operating conditions. The production solution for this issue was Foam material applied to fuel lines beginning CW 20/14. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue.


UPDATE Technical Bulletin
June 25, 2014
UPDATE – 20V3 Fuel Line (NVLW)
NOTE:
• Perform this UPDATE on all applicable vehicles within NEW VEHICLE LIMITED WARRANTY.
• It is MANDATORY to perform UPDATES on all applicable vehicles in dealer inventory PRIOR TO
RETAIL SALE.
• Inform customers that this UPDATE will be available free of charge as long as their vehicle is within
the Warranty parameters outlined in this UPDATE.
NOTE:
Required DMS Wording//Text: (line item, customer concern description on repair order):
UPDATE 20V3 – Fuel Line (NVLW)

Model(s)

Year

Engine Code

Trans. Code

Golf, GTI

2015

All

All

REVISION HISTORY
Revision

Date

Purpose

1

June 25, 2014

Original publication

Condition
This update has been proactively released to prevent an audible fuel line resonance generated from
the normal operation of the fuel delivery system perceived as a rattling noise under certain operating
conditions.
This UPDATE is in effect until removed.
Vehicle must meet all of the following criteria:

Procedure is valid only for vehicles that show the 20V3 code in Elsa, Campaign/Action Information
screen on the day of repair.

If the vehicle is sold it must be within the NEW VEHICLE LIMITED WARRANTY.

Procedure must be performed within the allotted time frame stated in this UPDATE.

Procedure must be performed on applicable vehicles in dealer inventory prior to sale.

Page 1 of 11
© 2014 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
Technical Background
Audible fuel line resonance generated from the normal operation of the fuel delivery system perceived
as a rattling noise under certain operating conditions.

Production Solution
Foam material applied to fuel lines beginning CW 20/14.

Page 2 of 11
© 2014 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
Service
NOTE:
• Elsa is the only valid inquiry/verification source. Check Elsa on the day this vehicle UPDATE will be
performed to verify vehicle eligibility for the UPDATE. Status must show “open”. Attach an Elsa
printout showing the “open” status to the repair order.
• If this UPDATE appears to have already been performed but the code still shows open in Elsa,
contact Warranty before proceeding further. Another dealer may have recently performed this
UPDATE but not yet entered a claim for it in the system.
• Elsa may also show additional open action(s); if so, inform your customer - this work can be done
while the vehicle is in for this UPDATE.
• Contact the Warranty Helpline (U.S.) or the Warranty Campaign Specialist (Canada) if you have any
questions.

Enter the VIN in Elsa and proceed to the
“Campaign/Action” screen

Tip: On the date of repair, print this screen
and keep a copy with the repair order
⇐ Ensure that the Status is “Open”

Note the Applicable Criteria ID
for use in determining the
correct work to be done and corresponding
parts associated.

Page 3 of 11
© 2014 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin

Parts needed:

N 10716201 (rubber isolator) – quantity 2

5Q0201958 (Foam) – quantity 1

Raise the vehicle on an appropriate hoist.

⇐ Remove the underbody shield from the
passenger side of the vehicle .

⇐ Remove the fuel line retainer from
the rear of the passenger side frame rail.

Page 4 of 11
© 2014 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin

Note: Two rubber isolators will be installed along with 1
piece of foam, with glue side facing
the hoses .

Position 1 = approximately 10 inches
Position 2 = approximately 1 inch
Position 3 = approximately 17 inches

Tip: A 3/8 x 12” extension can be used as a
tool to install the rubber isolator into
position 1. If a long enough extension
is not available, tape two extensions
together to prevent separation.

Note: DO NOT use sharp objects such as
screwdrivers to install rubber
isolators. Damage to fuel lines can
result by using such tools.

Spray the fuel line and rubber isolators
with glass cleaner prior to
installation. This will allow the isolator to
slide freely along the fuel line.

Page 5 of 11
© 2014 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin

⇐ Install the first rubber isolator (part#
N10716201) onto the black fuel line, then
using the edge of the 3/8” extension , carefully slide the isolator
approximately 10” into Position 1 as noted
previously.

⇐ Install the second rubber isolator, (part#
N10716201) onto the black fuel supply
line, then slide the isolator forward on the
fuel line so that it is positioned
approximately 1 inch into Position 2 as
shown .

Remove protective backing from foam
(part# 5Q0201958) to expose glue.

Note: Foam must adhere (be glued) to both
fuel lines.
⇐ Insert foam into Position 3 as
shown.
Tip: Push the fuel lines up with your finger
while installing foam to provide
more room to insert the foam into the channel.
Page 6 of 11
© 2014 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin

⇐ Adjust foam properly into Position 3 and ensure the foam adheres to
both fuel lines and fuel lines are not
touching each other.

⇐ Reinstall the fuel line retainer .

Page 7 of 11
© 2014 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin

⇐ Reinstall the underbody shield .

Work Complete

Warranty
Claim Entry
Procedure

Enter your claim immediately upon completion of the UPDATE. Claims will only be paid
for vehicles that show this UPDATE code open in Elsa on the day of repair. To help
ensure prompt and proper payment, attach the screen print to the repair order.

Claim Help

U.S. dealers - Contact the Warranty Helpline toll-free at 1-866-306-8447 for help with
claim entry.
Canadian dealers - Contact your Warranty Campaign Specialist. For contact
information, please proceed to “ServiceNet – Warranty/Contact Information/Campaigns
– “Warranty Campaign Specialist.”

Required Customer Ensure customers are aware of all work performed on the vehicle by recording the
Notification
information on the repair order.
Attach a copy of the Vehicle UPDATE Fact Sheet to the customer’s copy of the repair
order and take the time to explain this UPDATE to your customer.

Page 8 of 11
© 2014 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
SAGA Code 20V3 Claim Entry Procedure
Check Elsa to confirm that this UPDATE code is open on the day of repair.
Service No.: 20V3
Damage Code: 0099
Parts Manufacturer/Vendor Code: WWO
Claim Type
Sold vehicle = 7 10
Unsold vehicle = 7 90
Accounting Instructions
Criteria I.D. 01
Install two rubber isolators and one foam piece onto fuel line. No further work required
Repair operation:

2038 41 99

30 TU

Quantity

Part Number

Part Description

2

N 10716201

Rubber isolator

1

5Q0201958

Foam

There is NO reimbursement for wash or loaner vehicle!
If the vehicle is outside of the specified warranty period OR if customer refused repairs.
U.S. dealers: Submit the request through WISE under the Campaigns/Update/Recall Closure option.
Canadian dealers: Fax the Repair Order to Warranty at (905) 428-4811 and provide VIN, applicable
Service Number, Customer Information, Dealer Number and Date.

Page 9 of 11
© 2014 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin

Required Parts and Tools
Part Description

Part No:

Quantity

Rubber isolator

N 10716201

2

Foam

5Q0201958

1

Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or
removal. Always check Elsa for the most current version of this document.

Page 10 of 11
© 2014 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other
sites, without the prior expressed written permission of the publisher.

UPDATE Technical Bulletin
UPDATE FACT SHEET – UPDATE Code 20V3
Dear VolkswageneBay logo Customer,
Today we performed UPDATE code 20V3 on your vehicle. This UPDATE eliminates an
audible fuel line resonance generated from the normal operation of the fuel delivery system
perceived as a rattling noise under certain operating conditions, and was performed for you
free of charge.
VolkswageneBay logo periodically makes updates like this available in order to ensure our customer’s
continued satisfaction with the quality of their VolkswageneBay logo vehicles.
We at VolkswageneBay logo are committed to providing our customers with reliable, quality products
that are a pleasure to drive and own. If you should ever have any questions or vehicle
concerns, your authorized VolkswageneBay logo dealer will be pleased to assist you.
Thank you for driving a VolkswageneBay logo!

1

SaleBestseller No. 1
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
  • J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an...
  • All-in-One OEM Diagnostics: This J2534 ECU programming tool...
  • Proven Performance You Can Trust: Backed by over 10000 real...
  • Integrated Excellence, Always Up-to-Date: Featuring the...
  • Efficiency Meets Versatility: Engineered to support three...
SaleBestseller No. 2
TOPDON RLink J2534 OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, J2534-Pass-Thru for J2534/D-PDU/CAN-FD/DoIP, Supports 18+ Vehicle Brands, No OE Software Provided
  • [J2534 Pass-Thru Programmer] - TOPDON RLink J2534 is...
  • [All-in-One OEM Reprogramming and Diagnostics] - When...
  • [Tested, Trusted, and Proven for Accuracy] - TOPDON RLink...
  • [One-Click Installation, Continuous Updates] - The exclusive...
  • [Works with Windows Compatibility and OEM Software...

This product presentation was made with AAWP plugin.


If the PDF is very large, it may not load in the preview below.

Download PDF [543.32 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: Update Bulletin

Replacement Service Bulletin Number:

MFR Communication Date: 2014-06-25

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: FUEL SYSTEM, GASOLINE

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



SaleBestseller No. 1
THINKCAR Bidirectional Scan Tool, THINKSCAN 689BT All System Automotive Diagnostic Tool, Bi Directional OBD2 Scanner with ECU Coding, 34 Services, FCA Autoauth, CANFD and DoIP, Wireless Update
  • [Notice] When you receive a used escaner automotriz device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAMeBay logo and 64GB ROM, serving up to 5X faster than older MAX/MINIeBay logo/PLUS vehicle scanners escaner automotriz, no more slow and delayed feedbacks, it's time to update your garage tool.
  • [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner Escaner Automotriz, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCAeBay logo AutoAuth(The 689BT only provides a login and purchase portal, and users are required to register for an FCAeBay logo account and pay a membership fee in order to perform the relevant automotive diagnostics)
  • [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
  • [Hot Advanced Features] 689BT bidirectional tool newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
SaleBestseller No. 2
THINKCAR THINKSCAN 689 OBD2 Scanner, Bidirectional Scan Tool with 34+ Reset, 3000+ Active Test, ECU Coding, PMI, Wired Full System Diagnostic Scanner for Cars, CANFD/DOIP, FCA SGW AutoAuth
  • 【Warm Tips】Wired THINKSCAN 689 is connected through a detachable OBDII cable, and we also have added OBD2 Extension Cable (about 60 cm/2 feet) as g ift, enabling customers handling vehicle repairs with ease. Just click "Bundles Item" above to get it. Note: FCAeBay logo AutoAuth is a third-party service, additional cost may be required.
  • 【Professional Car Diagnostic Tool】Tired of renew fees? Thinkscan 689 scanner provides dealer-level advanced functions without annual fees for auto mechanics and repair shops. 34+ Services, 3000+ Active Test, ECU Coding, 140+ Brands Coverage, FCAeBay logo AutoAuth, CANFD&DOIP Protocol, Component Matching, Power Balance, V.A.G Guided, Compatible with Google Chrome integration, etc. With strong hardware backing, 64G Memory, Android 10, 4-core processors, and 4150mAh battery. Thinkscan 689 brings you the best as your daily business helper and never lets you drop the ball!
  • 【Over 34 Reset Service, Adaptation + Relearn + Calibration + Initialization + Matching】Made for workshops, Thinkscan 689 scanner provides 34+ services for worldwide vehicles: such as Gear/SAS/EPB/TPMS/D.P.F/I.M.M.O/BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset, ABS Bleed, Injector coding, etc. Warm tips: Compatibility may vary on vehicles' model and year, please contact seller before purchase to make sure it works well on your cars.
  • 【Real Active Test】Thinkscan 689 scan tool features over 3000+ full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior&exterior lights, sound horn, test door lock actuators, turn on/off front/rear side ACM Solenoid, Vehicle level position calibration, Wheel Speed Sensor Supply.
  • 【Comprehensive Solutions with Advanced Features】Take your vehicle customization to the next level with the Thinkscan 689's advanced ECU coding capabilities. This scan tool provides power balance, PMI, unlock more new features and enhance performance by activating dormant functions, customizing OE settings, matching replaced components, and reprogramming adaptive data to elevate your driving experience. Note: Compatibility varies by car models, please check before order.
SaleBestseller No. 3
THINKCAR THINKSCAN 662 OBD2 Scanner,Car Diagnostic Tool with Bidirectional Active Test,Car Scanner Engine ABS SRS Transmission,Scanner for Car with 12 Reset,CAN FD & FCA SGW,Lifetime Free Update
  • 【Powerful Bidirectional Control -- Active Test】Good News! The THINKSCAN 662 obd2 scanner has bidirectional control function,which is the most popular feature among mechanics.This function is mainly used to test whether the executing components in the electronic control system can work normally,By requesting information from the vehicle's ECU or sending commands to the ECU module to execute commands and identify maintenance status,quickly locate the cause of the fault.Such as ABS,Fuel Injectors,Adjusting Throttle,Coolant Fans,Radiator Fans,Coolant Pumps,EV.AP Test, Fuel Trim Reset,Injector Buzz Test,Pump/ Value Test,etc. Effectively shorten diagnosis time and reduce diagnosis costs.
  • 【Unlock Pro-Level Diagnostics With Half Costs】 THINKSCAN 662 obd2 scanner diagnostic tool Delivers Premium Scanning Power for Half the Price! The OBD2 scanner can handle common issues with ECM,TCM,ABS,SRS. It can easily read and clear fault codes, analyze data streams, and ensure quick identification of problems. THINKSCAN 662 bidirectional scan tool has 12 practical reset functions, including Airbag Reset,ABS Bleeding,BMS,Brake Reset, D.P.F,Throttle Adaptation,Injector Coding,OIL Reset,steering angle Reset,Gearbox,TPMS,and more. The car scanner diagnostic tool very suitable for DIY enthusiasts, car repair technicians, and small and medium-sized repair shops.
  • 【Multi Functional Intelligent Car Scanner Diagnostic Tool】 Automatic VIN + Real-time Data + DTC Lookup + Historical Diagnostic Records: This OBD2 scanner features auto serch technology, allowing for car recognition without the need for manual input. The real-time data of the car ECU is read and displayed in the form of text or a 4-in-1 merged waveform chart. You can save, share, print or send the entire inspection report via email for analysis. Historical diagnostic reports help you quickly identify vehicle issues and understand the condition of the vehicle. The built-in 'feedback' module provides customized repair Operation recommendations from our certified professionals.
  • 【Upgraded Hardware + Ergonomically Engineered】 THINKSCAN 662 OBD2 scanner has a friendly combination of touch screen and physical buttons with an ergonomic appearance for comfortable use.Experience 2x faster scans and 50% longer lifespan vs standard models.This scanner para autos boast a 4-core 1.8GHz CPU,6.2-inch HD touch screen,2GB RAMeBay logo + 32GB ROM storage capacity,a long-lasting 4150mAh battery,Android 8 ensures lightning-fast bootup and processing.The scanner is robust with rubberized protection that you can store and use in the trunk or garage.Whether you are engaged in Home car maintenance or road rescue car repair,this car scanner can help you perfectly solve car problems.
  • 【Effortless Setup & Scanning - Intuitive for All Skill Levels】No More Complicated Scanners! The User Interface is as User-Friendly as THINKCAR 689BT! Truly Plug-and-Play,The downward sliding setup shortcut portal and drawer function shortcut portal make you use this scan tool as easy as using your own cell phone.The car scanner supports setup screenshot,screen recording,volume adjustment,this scan tool includes product e-manuals,instructional videos,and fault code libraries,users can check the usage guide,perfect for DIY car owners,Maintenance technician.If your father,husband,brother,boyfriend enjoys car repairs,THINKSCAN 662 is a great gift choice, and it has amazing family value.

This product presentation was made with AAWP plugin.


Last update on 2026-06-09 / Affiliate links / Images from Amazon Product Advertising API


 
Share to...