Service Information
Offboard Diagnostic Information System Service (ODIS Service)

Number: AOS-16-03

Subject: Release Notes Supplement – ODIS Service from V3.0.0

Date: Jan. 20, 2016

Table of Contents
Page

Section
1.0

Introduction
1.1

2.0

2

General Information - Must Read!

2

Installation & Reinstallation

2

2.1

General Information

2

2.2

Diagnostic Devices

2

2.3

Security Certificate Process

3

2.4

Diagnostic Interface Support

3

3.0

New & Revised Diagnostic Functions

3

3.1

Accessing Onboard Diagnostic (OBD) Functions

3

3.2

Hotfix Management

5

3.3

Support Requests

6

4.0

New & Revised Function Displays

7

4.1

Guided Fault Finding (GFF) Test Step Displays

7

4.2

Diagnostic Trouble Code (DTC) Memory Displays

9

4.3

Vehicle Connection Status Indicators

10

4.4

Connection Type Detection for Flash Process

10

4.5

Virtual Keyboard

11

4.6

Clamp-On Ammeter Measurement Prompt

11

4.7

Notes & Warnings

11

Page 1 of 11
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
1.0 – Introduction
1.1 – General Information
The information in this document applies to ODIS Service versions from 3.0.0, and supplements or
clarifies the information displayed in the Release Notes that appear on ODIS Service startup, as well as
the User Guide installed with the application.
IMPORTANT: The information provided here is not definitive. For complete, detailed diagnostic
function instructions and display information, always refer to the ODIS Service User Guide.
Subsections with Revised or New information are marked accordingly.

2.0 – Installation & Reinstallation
2.1 – General Information
New: From December 17th, 2015, all installed versions of ODIS Service up to and including V2.2.7 must be
uninstalled, and version 3.0.0 or newer installed from a Volkswagen AG (VWAG) Group Services webserver. This mandatory installation must be performed on all diagnostic devices in workshop service.
ODIS Service versions prior to V3.0.0 are not updateable if they remain installed. An error message will be
displayed if an attempt to update a version prior to V3.0.0 is made.
“Installation Version DVDs” are no longer used for new installations and reinstallations. New installations
on new diagnostic devices and reinstallations on existing devices are performed by downloading and
installing the application and diagnostic database files from the VWAG Group Services web-server.
If reinstallation on an existing diagnostic device is necessary to resolve malfunctioning software:
• Backup copies of the license and security certificate files, as well as a text document containing the
diagnostic devices’ hardware key must be available.
• The existing version must always be uninstalled prior to reinstallation.

2.2 – Diagnostic Devices
2.2.1 – Hardware & Software Prerequisites
VAS Diagnostic Devices eligible for installing ODIS Service from V3.0.0:
 VAS 6150 A through D Laptop platforms ONLY
 All VAS 6160 Tablet platforms
Installation prerequisites for all platforms:
 Windows® 7 64-bit
 Internet Explorer (IE) 11.

Page 2 of 11
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
2.2.2 – Provision for New Devices
New: The “Target platform” (diagnostic device) selection prompt that appears during the application
installation routine includes new VAS diagnostic laptop and tablet derivatives.
Example: Select VAS6150x – additional VAS6150 derivative when installing ODIS Service on a new
VAS 6150D laptop:

Select for VAS 6150D laptop
Select for VAS 6160B tablet

2.3 – Security Certificate Process
New: Prior to installing ODIS Service, the security certificate must be requested from eCRMS, stored
and then imported to Windows. This is necessary to enable a secure connection to the VWAG webserver for application file download and installation (“Single-setup”).
The certificate must also be imported to the ODIS Service application after installation. This is necessary to
enable a secure connection to the VWAG web-server for diagnostic data file download (“Post-setup”).

2.4 – Diagnostic Interfaces
2.4.1 – VAS 6154 Diagnostic Interface Support
New: The VAS 6154 Diagnostic Interface is now configurable for ODIS Service use on the dealership’s
Local Access Network. Wireless (WLAN) and cabled (LAN) operation are possible.
The VAS 5054A Diagnostic Interface continues to be supported for Bluetooth® and USB operation.
2.4.2 – Softing EDIC Configuration Manager
New: A new interface is used to configure the VAS 5054A and VAS 6154 diagnostic interface devices.
The Softing EDIC Configuration Manager is automatically installed during the application installation
routine, and is accessed from the Windows desktop.
Page 3 of 11
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
3.0 – New & Revised Diagnostic Functions
3.1 – Accessing Onboard Diagnostic (OBD) Functions
Revised: For consistency, all Vehicle OBD and Control module OBD functions are now selectable
exclusively from the OBD operating mode via dedicated buttons located in the Control Module and
Component List displays. OBD access from modules listed in Diagnosis mode is no longer possible.
Highlight a module, select functions from the dropdown menu(s) and then click the green arrow button:
Vehicle OBD Functions:

Control Module OBD Functions:

(cont.)
Page 4 of 11
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
The Control module OBD and Vehicle OBD functions are also selectable from the dropdown menu when
right-clicking any control module in the Control Module List:

Targeted OBD functions are available by double-clicking control modules in the Components List:
To enable faster navigation, the DTC Memory selection now appears at the top of the list:

Page 5 of 11
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
3.2 – Hotfix Management
3.2.1 – Automatic Hotfix Deletion
New: Any existing Hotfix files that may be present are now automatically erased during the installation
of updated diagnostic database data downloaded from an online update. This prevents corruption of
the updated data.
3.2.2 – Hotfix Version Compatibility
New: If the Hotfix version being installed does not match that of the ODIS Service application version,
or if it is already resident in the version, a compatibility message is displayed:

You cannot use the hotfix because it was created for a different
application version. The data included in the hotfix may already
be included in the current version of the application.
3.3 – Support Requests
New: Support requests can now be saved when the brand and support email address fields are active in
the support inquiry window as illustrated.
When the Contact Data is configured in ODIS Service (Admin > Support > Contact Data), the brand is
selected and the support email address appears in the support request, select Save...:

(cont.)

Page 6 of 11
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
 Sent support requests are automatically saved in a default directory. If desired, an alternate save
location can be specified, e.g.: to a folder on the device desktop. Go to: Admin > Save locations >
Support, and then select Select…: Specify the new location as desired in the Browse for folder
dialog, and then select Save / Yes:
 Sent support requests are saved by default. To disable this feature, uncheck Save when Sending?:

4.0 – New & Revised Function Displays
4.1 – Guided Fault Finding (GFF) Test Step Displays
Revised: To enable more room for GFF description texts, the GFF test step indicators that normally
appear in the left margin are no longer displayed by default:

(cont.)

Page 7 of 11
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
Users wishing to review their progress in GFF can re-enable the test step indicators: Go to: Admin >
General > GFF Process. Check the Always display test steps feature and then select. Save / Yes:
(Note that this change remains in effect the next time ODIS Service is started. It can be disabled by
unchecking the feature.)

Test Step Indicators Re-Enabled:

Page 8 of 11
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
4.2 – Diagnostic Trouble Code (DTC) Memory Displays
Revised: The default DTC memory displays are optimized for viewing of multiple DTC entries. On initial
display of DTC(s), the DTC’s Environment Detail window is reduced in size below the DTC window:

If desired, highlight the desired DTC entry, select the window divider frame and drag it up or down as
desired to view or hide the environment details:

Page 9 of 11
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
4.3 – Vehicle Connection Status Indicators
4.3.1 – Connection Type Indicators
New: Icons to indicate the connection type in use are displayed in the vehicle connection status
window in the ODIS Service main display header:
Icon:

Connection Type Indicators:
• WLAN Infrastructure (wireless) connection
to VAS 6154 Diagnostic Interface
• WLAN Direct (wireless) connection to
VAS 6154 Diagnostic Interface
Bluetooth (wireless) connection to VAS 5054A
Diagnostic Interface
USB (cabled) connection to Diagnostic
Interface

4.3.2 – WLAN Connection Quality
New: When the VAS 6154 Diagnostic Interface is used in either of the WLAN operating modes, the
connection quality is indicated via the WLAN icon:

2.0
Poor connection

3.0

4.0

Sufficient connection

Good connection

5.0

1Excellent connection

4.4 – Connection Type Detection for Flash Process
New: Detection and warning of a wireless connection during flash processes is now implemented to
ensure uninterrupted data transfer.
If a Bluetooth or WLAN (wireless)
connection is detected during a flash
process, this message is displayed:

Page 10 of 11
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
4.5 – Virtual Keyboard
Revised: The automatic installation of a separate, ODIS Service virtual keyboard for VAS 6160X tablet
devices is deleted from the application installation routine.
If necessary, enable the Panasonic tablet virtual keyboard by pressing the keyboard button symbol (A2) on
the tester -arrow A- or selecting the keyboard icon in the Windows toolbar -arrow B-:

B

A

The Windows 7 keyboard can also be accessed as follows:
Go to: Start > All Programs > Accessories > Tablet PC > Tablet PC Input Panel

4.6 – Clamp-On Ammeter Measurement Prompt
Revised: The calibration prompts before every clamp-on ammeter measurement event no longer appear.
The calibration prompt now appears one time only per test instruments session if multiple measurements
of other types etc. are necessary in between current draw measurements.

4.7 – Notes & Warnings
Revised: The contents of the individual Notes,
Cautions and Warnings selection buttons in the
Administration > Info submenu are now consolidated
into a single Description of symbols button:

Page 11 of 11
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.