911 (993)

Technical Information

145/15

EN

4495

4

Replacement Shock Absorbers

Vehicle Types:

911 Carrera (993)/911 Carrera S (993)
911 Carrera 4 (993)/911 Carrera 4S (993)
911 Targa (993)

Model Year:

As of 1994 up to 1998

Subject:

Replacement shock absorbers (strut inserts)

Information:

Shock absorber for the respective chassis no longer available

Notes:

During repairs, the faulty shock absorber will be replaced by a new shock absorber of similar design.
The functional dimensions of the new shock absorber are the same as the shock absorber that is installed as standard equipment.
The shock absorbers MUST always be replaced on both sides of the axle or completely (front and
rear axle) in the case of the lowered chassis (M-no. 033).
The following tables show the respective vehicles with the possible chassis variants, and the corresponding shock absorbers required for replacement.
Please check this when ordering parts! For further information: see Porsche Electronic Parts Catalog
(PET).

Standard:

The standard chassis (M-no. M029)/touring suspension (M032 – ONLY for USA) was installed on the
911 Carrera 2/4 and 911 Targa.
Front axle
Standard Part No. – Approved

Manufac- Part numbers (replacement)
turer

993.343.041.03/.042.03 – worldwide Boge
993.343.041.37/.042.37 – worldwide Monroe

993.343.041.40/.042.40 – Shock absorber,
left/right (1 x), color: green

Rear axle
993.333.051.00/.052.00 – worldwide Boge
993.333.051.14/.052.14 – ONLY for
USA

Boge

993.333.051.34/.052.34 – worldwide Monroe
Sport:

993.333.051.38 – Shock absorber(2 x), color:
green
Also use: 993.333.073.04 – Suspension/stabilizer (2 x)

The sport suspension (M030; front axle: – 10 mm, rear axle: – 20 mm) was ONLY installed on the
911 Carrera, 911 Carrera S/4S coupés (M491 = Turbo Look).

2016© Porsche Cars North America, Inc.

AfterSales

Feb 10, 2016
Page 1 of 11

4

911 (993)
4495

EN

Technical Information

145/15

Front axle
Standard Part No. – Approved

Manufac- Part numbers (replacement)
turer

993.343.041.04/.042.04 – worldwide Boge
993.343.041.35/.042.35 – worldwide Monroe

993.343.041.39/.042.39 – Shock absorber,
left/right (1 x), color: red

Rear axle
993.333.051.12/.052.12 – Rest of the Boge
world (RoW)

Lowered:

993.333.051.13/.052.13 – USA

Boge

993.333.051.35/.052.35 – RoW

Monroe

993.333.051.36/.052.36 – USA

Monroe

993.333.051.39 – Shock absorber(2 x), color:
red
Also use: 993.333.073.04 – Suspension/stabilizer (2 x)

The lowered chassis (M033; front axle: – 10 mm, rear axle: – 20 mm) was ONLY installed on the 911
Carrera and 911 Targa including the S models (M491) in the “Rest of the world (RoW)” market.
Front axle
Standard Part No. – Approved

Manufac- Part numbers (replacement)
turer

993.343.041.07/.042.07 – RoW

Boge

993.343.041.38/.042.38 – RoW

Monroe

993.343.041.39/.042.39 – Shock absorber,
left/right (1 x), color: red
ONLY together with:
•
•

965.343.531.02.504 – Coil spring (2 x
for front axle)
Parts included for rear axle (see below)

Rear axle
993.343.051.02/.052.02 – RoW

Boge

993.343.051.37/.052.37 – RoW

Monroe

993.333.051.39 – Shock aborber(2 x), color:
red
ONLY together with:
•
•
•

Feb 10, 2016
Page 2 of 11

AfterSales

993.333.531.11.504 – Coil spring (2 x
for rear axle)
993.333.073.04 – Suspension/stabilizer
(2 x)
Parts included for front axle (see above)

2016© Porsche Cars North America, Inc.

911 (993)

Technical Information

145/15

EN

4495

4

Parts List:

Figure 1
Parts required for front axle:
993.343.041.401

1x

Shock absorber assembly, left - colur: green (not shown)

993.343.042.401

1x

Shock absorber assembly, right – color: green  Figure 1 -1-

993.343.041.392 3

1x

Shock absorber assembly, left – color: red (not shown)

993.343.042.392 3

1x

Shock absorber assembly, right – color: red  Figure 1 -1-

993.343.505.01

2x

Bellows-type protective tube * Figure 1 -5-

900.380.005.09

8x

Hexagon nut, M8 * (supporting mount, not shown)

965.343.531.02.5043

1x

Coil spring, set * – color coding: orange/green (not shown)

Front-axle shock absorber assembly always comprises:
1x

Shock absorber, left (not shown) or right ( Figure 1 -1-)

964.343.502.03

1x

Lock nut – lower (color: black)  Figure 1 -2-

964.343.503.02

1x

Adjusting nut – upper (color: black)  Figure 1 -3-

999.084.441.09

1x

Hexagon nut, M14 x 1.5 – DIN 985  Figure 1 -4-

———

* Must be ordered seperately.
1

Standard chassis (M-no. M029)/touring suspension (M032 – ONLY for USA)

2

Sport suspension (M030)

3

Lowered chassis (M033)

2016© Porsche Cars North America, Inc.

AfterSales

Feb 10, 2016
Page 3 of 11

4

911 (993)
4495

EN

Technical Information

145/15

Figure 2
Parts required for rear axle:
993.333.051.381

2x

993.333.051.392 3

2x

Shock absorber assembly, left/right – color: green  Figure 2
-1Shock absorber assembly, left/right – color: red (not shown)

993.343.505.01

2x

Bellows-type protective tube * Figure 2 -7-

993.333.073.04

2x

Suspension/stabiliser * Figure 2 -8-

993.333.531.11.5043

2x

Coil spring, set * – color coding: brown (not shown)

900.380.005.09

8x

900.380.008.01

4x

Hexagon nut, M8 * DIN EN 1664 (supporting mount, not
shown)
Hexagon nut, M10 * (suspension/stabilizer, not shown)

Rear-axle shock absorber assembly always comprises:
———

1x

Shock absorber ( Figure 2 -1-)

993.333.504.81

1x

Concave washer (lock nut, silver)  Figure 2 -2-

964.333.105.82

1x

Additional spring, plastic  Figure 2 -3-

999.025.230.03

1x

Concave washer, 14 x 48 x 3.5  Figure 2 -4-

993.333.466.81

1x

Sleeve  Figure 2 -5-

999.084.445.0B

1x

Hexagon nut, M12 x 1.25 – DIN 985  Figure 2 -6-

* Must be ordered seperately.
Spare Parts:

All parts specified with a Porsche part number in the Parts List are available separately as spare parts
(see also Porsche Electronic Parts Catalog – PET).

Tools:

V.A.G 1752 - Tensioning device for spring struts or commercially available tensioning device
V.A.G 1332 - Torque wrench, 40-200 Nm (30-148 ftlb.)

Feb 10, 2016
Page 4 of 11

AfterSales

2016© Porsche Cars North America, Inc.

911 (993)

Technical Information

145/15

EN

4495

4

9647 - Hook wrench or commercially available hook wrench
Shop light
Work Procedure: 1

Preparatory work
1.1

Position the vehicle on the lifting platform and lift it.

1.2

Remove faulty spring strut including second spring strut on the other side of the vehicle.
1.2.1

Front axle  Workshop Manual 40 8519 Removing front spring strut.
ONLY for vehicles with lowered chassis (M033): Also remove spring struts on
rear axle!

1.2.2

Rear axle  Workshop Manual 42 7119 Removing rear spring strut.
ONLY for vehicles with lowered chassis (M033): Also remove spring struts on
front axle!

2

Convert and install spring strut for front axle.
2.1

Measure dimension X1 (top of adjusting
nut/mounting point for shock absorber
Figure 3 -X1-) on the standard spring
strut.
1
2
3
4
X1

–
–
–
–

Standard shock absorber
New shock absorber
Adjusting nut
Mounting point for shock absorber
– Dimension of top of adjusting
nut/mounting point for shock
absorber

Figure 3

2016© Porsche Cars North America, Inc.

After ales

Feb 10, 2016
Page 5 of 11

4

911 (993)
4495

EN

Technical Information

145/15
2.2

Adjust dimension X2 (top of adjusting
nut/mounting point for shock absorber
 Figure 4 -X2-) in accordance with dimension X1 (standard spring strut).
1
2
3
4
5
X1

X2

2.3

–