NHTSA ID Number: 10117354
Manufacturer Communication Number: TSB130080-060620
TSB/Document Date: 2017-09-14
Summary
This Technical Service Bulletin introduces a new Cummins
Service Engine Model Identification. This is a revision to a previous communication.
Cummins® Service Engine Model Identification
Page 1 of 9
Technical Service Bulletin Number
TSB130080
Technical Service Bulletin
Subject
Cummins® Service Engine Model Identification
Warranty Statement
The information in this document has no effect on present warranty coverage or repair
practices, nor does it authorize TRP or Campaign actions.
Contents
Introduction to Service Engine Model Names
The purpose of this document is to introduce Cummins® Service Engine Model
Identification. Prior to 2007, Cummins Inc. primarily relied on the marketing model name to
identify products. As Cummins Inc. introduced more products, the marketing model names
were found to be too generic and did not identify variations of a product with the same
marketing model name. Beginning in 2007, Cummins Inc. started using service model
names to:
• Match the correct Cummins® service information and tools to a specific engine.
• Assist repair locations with finding service information when the engine serial number
(ESN) is not available.
The original service model name used a suffix with letters to designate emissions-related
hardware/technology used for that product. The Cummins® Service Engine Model Product
Identification procedure provided a description of that service model name strategy. Refer to
Procedure 100-003 in Section E.
2013 Service Engine Model Name
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2013/tsb130080.html
6/26/2017
Cummins® Service Engine Model Identification
Page 2 of 9
Beginning in 2013, a new service engine model name strategy was implemented, replacing
the previous strategy. Limitations were found with the previous engine service model name
strategy. Engines that used the previous service model name will not be updated with new
service model names. The Cummins® Service Engine Model Identification procedure
describes this new service model name strategy. Refer to Procedure 100-005 in Section E.
In addition to the new service model name strategy procedure, an additional new procedure
was created, Cummins® Product Technology. This procedure can be used to identify the:
•
•
•
•
The service model name for the product covered by the manual.
The emission regulations the product was first released to meet (engines only).
Hardware/technology used by the product.
Market applications for which the product is used.
2017 Service Engine Model Name
Beginning in 2017, an update was made to the service engine model name strategy to
support a change to marketing model names. The change to the marketing model name was
to remove the “IS” and “QS”, which previously could be used to differentiate automotive and
industrial applications. In order to continue to support application identification, the service
engine model name will have a new letter designation at the end of the suffix to identify the
application type. The Cummins® Service Engine Model Identification (2017) procedure
provides details. Refer to Procedure 100-008 in Section E. Only new engines that use the
new marketing model name will have an additional letter designation at the end of the suffix
of the service engine model name.
List of Service Engine Model Names
The below table lists the Cummins® products released with the new service engine model
name and a link to the Cummins® Product Technology Procedure for that engine.
To find a particular service engine model name quickly, utilize the search function on your
computer by typing in the service engine model name. With an English keyboard and
computer equipped with Windows™ operating system this is accomplished by
simultaneously pressing the “Ctrl” key and the “F” key on the computer keyboard.
Service Model Name
Bulletin
Number
Procedure Number
Procedure
B Series
B4.5 CM2350 B129B
5411247
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
B4.5 CM2350 B147B StopStart Applications
5411252
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
B6.7 CM2350 B121B
5411223
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
B6.7 CM2350 B135B
5411257
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2013/tsb130080.html
6/26/2017
Cummins® Service Engine Model Identification
Service Model Name
B6.7 CM2350 B148B StopStart Applications
Bulletin
Number
5411262
Page 3 of 9
Procedure Number
Procedure
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
B6.7 G CMOH6.0 B125
4383640
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISB3.9 CM2220 B107
4310792
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISB4.5 CM2350 B104
4332646
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISB5.9 CM2880 B110
4332883
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISB5.9 CM2880 B127
4383645
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISB6.7 CM2350 B101
2883567
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISB6.7 CM2350 B103
4332641
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISB6.7 CM2350 B142
5411131
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISB6.7 G CM2180 B118
5411104
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISB/ISD4.5 CM2150 B119
4358465
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISB/ISD6.7 CM2150 B120
4358470
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISB/ISD6.7 CM2880 B126
4383693
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISD6.7 CM2880 D101
5411372
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB3.3 CM2250 B137
5411058
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB3.9 CM2880 B138
5411050
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB4.5 CM2150 B108
4326163
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB4.5 CM2250 B131
4388774
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB4.5 CM2350 B106
4367376
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2013/tsb130080.html
6/26/2017
Cummins® Service Engine Model Identification
Page 4 of 9
Service Model Name
Bulletin
Number
QSB4.5 CM2350 B122
4388767
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB4.5 CM2350 B144
5411382
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB5.9 CM2880 B115
4332708
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB5.9 CM2880 B139
4388870
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB6.7 CM2350 B105
4332778
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB6.7 CM2150 B109
4326168
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB6.7 CM2350 B112
4358498
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB6.7 CM2880 B116
4363713
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB6.7 CM2250 B128
4388601
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB6.7 CM2350 B130
4388668
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB6.7 CM2350 B145
5411273
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSB7 CM2880 B117
4358390
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
Procedure Number
Procedure
C Series
QSC8.3 CM2880 C102
4388785
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
F Series
F3.8 F102
4325984
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
F3.8 CM2350 F120B
5411237
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISF2.8 CM2220 F101
4310846
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISF2.8 CM2220 F117
4388578
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISF2.8 CM2220 F126
5411159
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2013/tsb130080.html
6/26/2017
Cummins® Service Engine Model Identification
Service Model Name
Bulletin
Number
Page 5 of 9
Procedure Number
Procedure
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISF2.8 CM2220 F129
5411325
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISF3.8 CM2220 F103
4310839
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISF3.8 CM2350 F109
4367218
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISF3.8 CM2220 F110
4358480
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISF3.8 CM2220 F116
4383664
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
ISF4.5 CM2220 F123
5411320
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSF2.8 CM2880 F104
4332741
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSF2.8 CM2880 F105
4358561
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSF2.8 CM2880 F108
4332746
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSF2.8 CM2880 F114
4383734
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSF2.8 CM2880 F124
5411484
Refer to Procedure 100- Cummins® Product
006 in Section E.
Technology
QSF2.8 CM2880 F131
5411489
Refer to Procedure 100- Cummins® Product
006 in Section E.
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Viscosity breakdown as measured in Kurt Orbahn test on 5W...
- As measured in Seq IX test under high load/torque conditions...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: TSB130080-060620
Replacement Service Bulletin Number:
MFR Communication Date: 2017-06-06
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.