NHTSA ID Number: 10115833
Manufacturer Communication Number: A17-036
TSB/Document Date: 2017-08-25
Summary
Service bulletin - The MIL comes on with DTC P0430 (front bank catalyst system efficiency below threshold [Bank 2]). The PCM software may misinterpret sensor inputs as a deteriorated catalytic converter.
Service Bulletin
17-036
August 16, 2017
07162 Version 2
MIL Comes On with DTC P0430 (Front Bank Catalyst System Efficiency
Below Threshold [Bank 2])
Supersedes 17-036, dated June 20, 2017; to revise the section highlighted in yellow
AFFECTED VEHICLES
Year
Model
2016–17
Pilot
2018
Odyssey
2017
Ridgeline
Trim
ALL
ALL
ALL
VIN Range
ALL
ALL
ALL
REVISION SUMMARY
• The 2017 Ridgeline, 2017 Pilot and 2018 Odyssey were added to AFFECTED VEHICLES and SOFTWARE
INFORMATION.
SYMPTOM
The MIL comes on with DTC P0430 (front bank catalyst system efficiency below threshold [Bank 2]).
POSSIBLE CAUSES
The PCM software may misinterpret sensor inputs as a deteriorated catalytic converter.
CORRECTIVE ACTION
Update the PGM-FI software.
WARRANTY CLAIM INFORMATION
The normal warranty applies.
Operation
Number
1255C1
B
Description
Flat Rate
Time
Update the PGM-FI
software.
0.2 hr
Confirm 9AT software
update only - add.
0.1 hr
Defect
Code
03214
Symptom
Code
Template
ID
03217
17-036B
Failed Part
Number
37805-RLV-315
NOTE: Use the warranty information below only if the 9AT software update was required.
Operation
Number
1255C1
B
C
Description
Flat Rate
Time
Update the PGM-FI
software.
0.2 hr
Confirm 9A/T software
update only - add.
0.1 hr
Do the 9A/T software
update - add.
0.1 hr
Defect
Code
03214
Symptom
Code
03217
Template
ID
17-036C
Failed Part
Number
37805-RLV-315
Skill Level: Repair Technician
CUSTOMER INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools,
equipment, and training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and
you should not assume this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this
information applies, contact an authorized Honda
automobile dealer.
© 2017 American Honda Motor Co., Inc. – All Rights Reserved
Page 1 of 9
SOFTWARE INFORMATION
NOTE: Unnecessary or incorrect repairs resulting from a failure to update the i-HDS or MVCI are not covered under
warranty.
i-HDS Software Version: 1.003.015 or later
J2534 Software Information:
PC Application Version 1.1.0.2 or later
Database update 12-JUL-2017 or later
Before beginning the repair, make sure that both the i-HDS and J2534 software are updated as listed above.
Do only the update listed in this service bulletin.
You cannot apply the updates with the MVCI as a standalone tool. To update the vehicle, you must use the
DST-i interface or MVCI in conjunction with the J2534 Rewrite PC application on the i-HDS.
For more information about updating the i-HDS, the MVCI, and vehicle systems, refer to Service Bulletin 01-023,
Updating Control Units/Modules.
Year/Model
2016 Pilot
2017 Pilot
Program ID (or later)
LX 2WD
EX 2WD
EX-L 2WD
EX-L (NAVI) 2WD
EX-L (RES) 2WD
LX 4WD
EX 4WD
EX-L 4WD
EX-L (NAVI) 4WD
EX-L (RES) 4WD
EX (Sensing) 2WD
EX-L (Sensing) 2WD
EX (Sensing) 4WD
EX-L (Sensing) 4WD
*TRG (9A/T) 2WD
*TRG (9A/T) 4WD
*Elite (9A/T) 4WD
LX 2WD
EX 2WD
EX-L 2WD
EX-L (NAVI) 2WD
EX-L (RES) 2WD
LX 4WD
EX 4WD
EX-L 4WD
EX-L (NAVI) 4WD
EX-L (RES) 4WD
EX (Sensing) 2WD
EX-L (Sensing) 2WD
EX (Sensing) 4WD
EX-L (Sensing) 4WD
*TRG (9A/T) 2WD
*TRG (9A/T) 4WD
*Elite (9A/T) 4WD
Program P/N (or later)
LV3150
37805-RLV-315
LV3160
37805-RLV-316
LV3170
37805-RLV-317
LV3180
37805-RLV-318
LV4060
37805-RLV-406
LV4070
37805-RLV 407
LVC030
37805-RLV-C03
LVC130
37805-RLV-C13
LVC230
37805-RLV-C23
LVC330
37805-RLV-C33
LVC430
37805-RLV-C43
LVC530
37805-RLV-C53
Page 2 of 9
2018 Odyssey
2017 Ridgeline
*LX
*EX
*EX-L
*EX-L (NAVI, RES)
TRG
Elite
RTL 4WD
RTL-T 4WD
Sport 4WD
Black 4WD
RTL-E 4WD
RT 2WD
RTL 2WD
RTL-T 2WD
Sport 2WD
MRA040
37805-5MR-A04
MRA250
37805-5MR-A25
MRA750
37805-5MR-A75
MJA560
37805-5MJ-A56
MJA760
37805-5MJ-A76
MJA060
37805-5MJ-A06
* Confirm that the 9A/T software is up-to-date
REPAIR PROCEDURE
NOTE:
• You cannot update the vehicle using the MVCI as a standalone tool.
• Do not use the MongoosePro VCI tool.
• Make sure the 12-volt battery is fully charged before starting an update.
• Connect a fully charged jumper battery to the vehicle, and leave it connected during the entire procedure to
maintain steady voltage.
• Never turn the ignition to OFF or ACCESSORY during the update. If there is a problem with the update, leave the
ignition turned to ON.
• To prevent PCM damage, do not operate anything electrical (headlights, audio system, brakes, A/C, power
windows, door locks, etc.) during the update.
• If you see the following Error Display, check that you are using the correct tool (MVCI or DST-i) with the i-HDS.
Page 3 of 9
To change this, click on either of the SETTING selection buttons at the bottom of the J2534 initial screens as
shown.
1. Update the PGM-FI or A/T software by selecting the i-HDS Diagnostic System icon. Refer to service bulletin
01-026, Updating Control Units/Modules.
NOTE: Do not use the Rewrite icon on your desktop.
2. Select J2534 Rewrite.
Page 4 of 9
3. Confirm the software is the same or later as listed in SOFTWARE INFORMATION.
4. Select Start, then follow the screen prompts.
NOTE:
• Do not enter a bulletin number.
• If you receive a message that the vehicle has been already updated or that no update is available, check the
PGM-FI Data List. The header should indicate one of the following numbers (or later):
•
37805-RLV-315
37805-RLV-316
37805-RLV-317
37805-RLV-318
37805-RLV-406
37805-RLV-407
37805-RLV-C03
37805-RLV-C13
37805-RLV-C23
37805-RLV-C33
37805-RLV-C43
37805-RLV-C53
37805-5MR-A04
37805-5MR-A25
37805-5MR-A75
37805-5MJ-A56
37805-5MJ-A76
37805-5MJ-A06
If the program part numbers do not match those listed above, the i-HDS software needs to be reinstalled.
Contact the Special Tools Hotline at 800-346-6327 for assistance.
Page 5 of 9
Confirm 9AT Software is Up to Date
1. Select J2534 Rewrite.
2. Select Start.
3. Select Start.
Page 6 of 9
4. Select Next.
5. Select Next.
Page 7 of 9
6. Select Next, and a loading screen will appear.
Page 8 of 9
7. Check if TCM appears under System Selection?
•
•
If it appears, choose Select then ENTER on the next screen to update the TCM software.
If it does not appear, the TCM software is up to date.
END
Page 9 of 9
- [J2534 Pass-Thru Programmer] - TOPDON RLink J2534 is...
- [All-in-One OEM Reprogramming and Diagnostics] - When...
- [Tested, Trusted, and Proven for Accuracy] - TOPDON RLink...
- [One-Click Installation, Continuous Updates] - The exclusive...
- [Works with Windows Compatibility and OEM Software...
This product presentation was made with AAWP plugin.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: A17-036
Replacement Service Bulletin Number:
MFR Communication Date: 2017-08-16
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Scanner POR V2.0 with all obd2 services
- Do the scanning for engine
- Support OBDII/EOBD Ten Modes of Operation
- 【Designed for Most Mercedes-Benz
, Sprinter and Smart from 1996-2023】As every car model of Benz has its-owned specific car system and ECUs, not all models are equipped with a complete vehicle ECU, which may cause the scanner to be unable to perform all listed reset services on some models, or even completely incompatible. Like For Sprinter's newer models, it support diagnostic functions only, lacking support for specialized service functions.. So please tell us the car's VIN and required service before purchase for compatibility check. You may also refer to the instructions in the eighth image of the main product photos to perform your inquiry. - 【Up to 38 Reset Services】MB V3.0 2026 Version diagnostic tool performs Up to 38 maintenance services - Oil Rest , SAS, EPB, ETC, D-P-F, TPMS, ABS, Suspension, Air Conditioner, Head Lamp, Body Stability, Engine Control, Seat, Fuel Pump, Air-Filter, Engine Idle, Door, Im-mo-bilizer, Injector Coding, Transmission Control, Miscellaneous, Adblue, BMS, Cluth, Water Pump, NOxSensor, Rain/Light Sensor, Start/Stop, Radar/Camera, Cylinder Shutoff Test, Speed Limit Assist, Control Unit Reset, Oxygen Sensor, Seat Belt, Cruise Control System, Turbocharger, Crankshaft, Language Setting and etc. (Tips: Please update the software after receiving the product to obtain new service functions)
- 【OE-Level All System OBD2 Scanner】iCarsoft MB V3.0 (2026 Version) diagnostic scanner offers comprehensive OBDII services, allowing you to quickly scan all systems, including the Engine, ABS, SAS, SRS, TPMS, TCM, Fuel Pump System, ESP, EPB, EPS, Suspension, SCM, Adaptive Systems, and more. It supports functions such as reading and erasing codes, checking I/M readiness, viewing freeze frame data, performing O2 sensor tests, conducting on-board monitoring, testing the evap system, auto VIN retrieval, and reading both generic and specific codes, as well as DTCs and battery tests.
- 【Bidirectional Scan Tool】iCarsoft MB V3.0 (2026 Version) Bidirectional scanner supports activate or control a vehicle system or component, allows commanding cars’ modules and receiving info from the ECU to perform active tests on individual components, including EVAP/ABS Motor Pump/Windows/Sunroof and more, to pinpoint fault causes & resolve issues,and allows you to re-learn certain components after making repairs or replacement.
- 【Real Time Record & Graph View】iCarsoft MB V3.0 (2026 Version) can automatically record vehicle text history and identify vehicle information. Preserve real-time data information. View & Graph Live Data. Support Data Review and Print. Multi-language: English, German, Dutch, Spanish, French and so on. We promise to offer Lifetime updates (Lifetime free Update via PC), and confidence in products. We also provide 1 year warranty + extra lifetime hardware free repair if you need it in the future. We prioritize user experience & strive to meet your expectations. Please do feel free to reach out to us if you have any question or problem about the usage, our tech team will service you in time.
- WHY CHOOSE THE 2025 CR MAX -Upgrade the latest diagnostic capabilities for all vehicles after 1996: upgrade to 49+maintenance services; 46 extra specific functions; real all systems/all control modules diagnose; over 40K+ bidirectional actuation tests for diagnosing all control moduels of cars; Powerful full OBD2 Functions; built-in ECU Coding for BMW/ Audi/ VW/ RollsRoyce; Fr ee V.A.G Guide Function; Battery retistration for new battery adaptation and more. It covers all vehicle diagnostic services and some special professional vehicle maintenance servces, assists you to do home DIY vehicle maintenance or car repair as a pro technician.
- NEWEST IN INNOVATION FULL OBD2 SERVICES- iCarsoft auto car diagnostic scanner compatible with CAN-FD, CR MAX can do it all-reads and clears trouble codes, ALL SYSTEM DIAGNOSIS such as engine, transmission, ABS and airbag etc. CR MAX code reader for all cars can perform I/M Readiness, Live Data, Freeze Frame, Vehicle Information, Monitor Test, On-Board Monitor, E vap System Test,O2 Sensor Test,DTC Library Lookup,etc. (Warm Tips: If you car is after 2023,please contact us for compatibility; 3. It comes with 16PIN OBD2 diagnostic adapter, please check your car diagnostic socket if it is 16pin socket, if your car is 14pin diagnostic socket please contact us for the solution.)
- 49 RESET+ 46 SERVICES- Performs: Oil Reset, EPB,SAS,Throttle, D-P - F, Battery, ABS, Injector, TPMS, Suspension, AC, Head Lamp, Body Stablity, Engine, Tramsmission, Airbag, Seat, Door-Win-Roof, Fuel Pump, Door, E-G- R.+21 NEWEST SERVICES( Need update scanner)-AdBlue, Clutch, Crankshaft, High Voltage Battery, Cruise Control, NO xSensor, Rain Sensor, Stop And Start, Turbocharger, Head Up Display, Radar Camera, Vehicle Setup, Cyliner Misfire Check,Speedlimitassist, ControlUnitReset,OxygenSensor, Seatbelt. Extra 46+ extra services based on car brand.(Tips: Quantity of reset/ calibration fucitons are based on car system that your vehicle model has)
- REVOLUTIONARY 40000+BIDIRECTIONAL ACTIVE TESTS: Upgraded CR Max scanner equip with numberous of actuational test items for covering all available vehicle control modules, no longer only do simple light test or window test like other scanners, performs hardware modules test and software control modules test for checking car units or new updated control moduels work well or not after maintenance/ repair/ re-installation/ control system updated (Example for Benz- Roller Sun Blind test; Backup Camera test ;Self-test; EPB test; Transport Mode test;Boost Pressure Positioner test; Fuel Pump test; AND MORE!!).(Warm tip: The available test items are based on control modules your car has)
- ECU CODING+ BATTERY REGISTRATION- Powerful ECU Coding service for BMW/MINI/RollsRoyce / Audi/VW/Seat/Skoda/Bentley/Bugatti/Lamborghini, Improves Engine Power Performance and Optimizes Fuel Efficiency and Match New Hardware Unit to car and Customized a comfortable Driving Modes and Fixes & Updates Original Software Bug. The battery test function for checking car battery health, perform battery reset (BMS ) for replacing a damaged or aging car battery with a new one and register new battery to car ECU
This product presentation was made with AAWP plugin.
Last update on 2026-06-05 / Affiliate links / Images from Amazon Product Advertising API