Service

Technical Information

93/13 ENU

WD61

2

WD61 - Replacing High-voltage Battery (Stop Sale Campaign/Workshop Campaign)

Vehicle Type:

Panamera S E-Hybrid

Model Year:

2014

Concerns:

High-voltage battery

Information:

This is to inform you of a Stop Sale/Workshop Campaign on the above-mentioned vehicles. There is a
possibility that high-voltage batteries from a batch that does not conform to the high quality
standards of Porsche AG may have been installed in the affected vehicles.
As a result, the high-voltage battery may fail after the vehicle has been driven for just a short time. If this
happens, the message "Hybrid system failure" will be displayed in the instrument cluster.

Action
Required:

Replace high-voltage battery.

Affected
Vehicles:

The VIN(s) can be checked by using PIWIS Vehicle Information link to verify if the campaign affects the
vehicle. This campaign is scope specific to the VIN! Failure to verify in PIWIS may result in an improper
repair. This campaign currently affects only 3 vehicles in North America.

Parts Info:

NOTE: PLEASE SUBMIT A PTEC/PAV FOR REQUIRED PARTS.

Materials:

7PP.915.590.B

 Battery (high-voltage battery)

1 ea.

N .906.661.01

 Tie-wrap clip

5 ea.

970.555.643.01

 Screw bolt for locking mechanism

2 ea.

999.507.584.02

 Clamp

10 ea.

999.507.839.01

 Clip

10 ea.

000.043.301.47

 Antifreeze, 1-liter container

approx. 1 liter per vehicle
(as much as required)

...

Tie-wrap, approx. 3.0 x 200 mm
e.g. 999.513.075.40

5 ea.*

* For warranty invoicing for P/N WD610000001, enter "tie-wrap" designation as a sublet part.
Special Tools:

•
•
•
•

VAS 6558/9-6 - High-voltage test adapter HVA 280
VAS 6558/9-7 - High-voltage test adapter HVR 40
VAS 6884 - High-voltage cordon
VAS 6883 - Insulated tool set

2013© Porsche Cars North America, Inc.

AfterSales

Dec 13, 2013
Page 1 of 5

2

Service
WD61

ENU

•
•
•
•
•
•
•
•
•

Technical Information

93/13

9860 - Adapter plate
3033 - Lifting tackle
VAS 6100 - Workshop crane
T40262 - Locking cap
9818 - PIWIS Tester II
9696 - Filling device
Nr.192 - Hose clamping pliers
Nr.90 Pos.2 - Torque wrench
Nr.90 Pos.6 - Torque wrench

Work
Procedure:

See Attachment “A”.

Claim
Submission:

See Attachment “B”.

Installation
Position:

Installation position of high-voltage battery
Attachment "A": Work Procedure

Dec 13, 2013
Page 2 of 5

AfterSales

2013© Porsche Cars North America, Inc.

Service

Technical Information

93/13 ENU

WD61

2

WARNING
High voltage
•

Danger of electric shock from live parts

•

Risk of serious burns or death



Work on the HV battery may only be carried out by a high-voltage technician.



Always use insulated tools VAS 6883 - Insulated tool set when working on the HV battery.



Observe general warning notes for working on the high-voltage vehicle electrical system.  Workshop
Manual '2X00IN General warning notes for working on the high-voltage electrical system'

Information
Before starting to work on the high-voltage system, a high-voltage technician must isolate the
high-voltage system from the power supply.
The document  Workshop Manual '2X00IN Isolation from supply prior to performing maintenance
tasks on hybrid vehicles' describes the various types of work for which the high-voltage system must be
isolated from the power supply.
The test log Verifying absence of electric charge and Restarting high-voltage system can be
found under Standard forms in PIWIS.
1

Observe warning notes  Workshop Manual '2X00IN General warning notes for working on the
high-voltage vehicle electrical system'.

2

The high-voltage system must be isolated from the power supply and the related documentation
for isolating the high-voltage system and classification of the high-voltage battery must be
completed.
 Workshop Manual '2X00IN Isolating high-voltage electrical system from power supply/Starting
high-voltage electrical system'
 Workshop Manual '2X00IN Classification of high-voltage battery'

3

The high-voltage battery must now be replaced  Workshop Manual '270855 Replacing
high-voltage battery'.

4

Restart the high-voltage system and complete the relevant documentation  Workshop Manual
'2X00IN Isolating high-voltage electrical system from power supply/Starting high-voltage electrical
system'.

5

Enter the Stop Sale/Workshop campaign in the Warranty and Maintenance booklet.

Attachment "B": Claim Submission - Workshop Campaign WD61
Warranty claims should be submitted via WWS/PQIS.

2013© Porsche Cars North America, Inc.

AfterSales

Dec 13, 2013
Page 3 of 5

2

Service
WD61

ENU

Technical Information

93/13

Open campaigns may be checked by using either the PIWIS Vehicle Information system or through PQIS
Job Creation.
Labor, parts, and sublet will be automatically inserted when Technician is selected in WWS/PQIS. If
necessary, the required part numbers will need to be manually entered into warranty system by the dealer
administrator.
Labor time: 495 TU

Replacing high-voltage battery
Includes:
Isolating high-voltage system from power supply and
starting high-voltage system
Removing and installing subwoofer
Removing and installing luggage compartment cover
Removing and installing C-pillar trim panel
Removing and installing side trim panel
Removing and installing cover for lock support
Removing and installing battery
Removing and installing KESSY antenna
Removing and installing high-voltage charger
Removing and installing high-voltage battery
Removing and installing battery cross member
Filling coolant
Bleeding low-temperature cooling system
Connecting and disconnecting battery charger
Connecting and disconnecting PIWIS Tester
Packing high-voltage battery in transport box
Parts required:
7PP.915.590.B

Battery

1 ea.

N .906.661.01

Tie-wrap clip

5 ea.

970.555.643.01

Screw bolt for locking mechanism

2 ea.

999.507.584.02

Clamp

10 ea.

999.507.839.01

Clip

10 ea.

000.043.301.47

Antifreeze, 1-liter container

1 ea.

WD610000001

Tie-wrap

1 ea.
(i.e. 5 tie-wraps, approx.
3.0 x 200 mm
e.g. 999.513.075.40;
for warranty invoicing
only)*

* For warranty invoicing for P/N WD610000001, enter "tie-wrap" designation as a sublet part.

Dec 13, 2013
Page 4 of 5

AfterSales

2013© Porsche Cars North America, Inc.

Service

Technical Information

93/13 ENU

WD61

2

 Damage code WD61 066 000 2
References:

 Workshop Manual '2X00IN General warning notes for working on the high-voltage vehicle electrical
system'
 Workshop Manual '2X00IN Isolating high-voltage electrical system from power supply/Starting
high-voltage electrical system'
 Workshop Manual '270855 Replacing high-voltage battery'
 Workshop Manual '2X00IN Classification of high-voltage battery'

Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. If a particular condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your authorized Porsche Dealer for the latest information
about whether a particular technical bulletin applies to your vehicle. Part numbers listed in these bulletins are for reference only. Always check with your authorized Porsche dealer to verify the current and
correct part numbers. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS
Tester are the ones that must be followed.
© Porsche Cars North America, Inc.

Dealership
Distribution
Routing

Service Manager

_______

Shop Foreman

_______

Service Technician

________

_______

_______

_______

Asst. Manager

_______

Warranty Admin.

_______

Service Technician

________

_______

_______

_______

Dr. Ing. h.c. F. Porsche AG is the owner of numerous trademarks, both registered and unregistered, including without limitation the Porsche Crest®, Porsche®, Boxster®, Carrera®, Cayenne®,
Cayman®, Panamera®, Speedster®, Spyder®, 918 Spyder®, Tiptronic®, VarioCam®, PCM®, PDK®, 911®, 4S®, FOUR, UNCOMPROMISED.® and the model numbers and the distinctive shapes of
the Porsche automobiles such as, the federally registered 911 and Boxster automobiles. The third party trademarks contained herein are the properties of their respective owners. Porsche Cars North
America, Inc. believes the specifications to be correct at the time of printing. Specifications, performance standards, standard equipment, options, and other elements shown are subject to change without
notice. Some options may be unavailable when a car is built. Some vehicles may be shown with non-U.S. equipment. The information contained herein is for internal use only by authorized Porsche dealers
and authorized users and cannot be copied or distributed. Porsche recommends seat belt usage and observance of traffic laws at all times.
Printed in the USA

2013© Porsche Cars North America, Inc.

AfterSales

Dec 13, 2013
Page 5 of 5