NHTSA ID Number: 10109247
Manufacturer Communication Number: NTB15-086g
TSB/Document Date: 2017-08-01
Summary
2013-2014 ALTIMA AND 2014-2016 ROGUE; MIL ON WITH DTC P0776, P1715 MAY HAVE HESITATION AND/OR LACK OF POWER This bulletin applies only to Altima vehicles equipped with 4-cylinder engine. This bulletin has been amended. The PARTS INFORMATION section has been revised. No other changes have been made. Please discard all previous versions of this bulletin.
5HA5A
2014
Rogue
2015
20/28
NTB15-086g
7. Follow the on-screen instructions to navigate C-III plus and reprogram the TCM.
NOTE:
In some cases, more than one new P/N for reprogramming is available.
If more than one new P/N is available, the screen in Figure 3B displays.
Select and use the reprogramming option that does not have the message
“Caution! Use ONLY with NTBXX-XXX”.
If you get this screen and it is blank (no reprogramming listed), it means there is no
reprogramming available for this vehicle.
Figure 3B
21/28
NTB15-086g
8. When the screen in Figure 4B displays, reprogramming is complete.
NOTE: If the screen in Figure 4B does not display (indicating that reprogramming did
not complete), refer to the information on the next page.
9. Disconnect the battery charger from the vehicle.
10. Select Next.
Step
10
Figure 4B
NOTE:
In the next step (page 24) you will perform Erase All DTCs.
DTC erase is required before C-III plus will provide the final reprogramming
confirmation report.
22/28
NTB15-086g
TCM Recovery:
Do not disconnect plus VI or shut down C-III plus if reprogramming does not
complete.
If reprogramming does not complete and the “!?” icon displays as shown in
Figure 5B:
Check battery voltage
(12.0–15.5 V).
Ignition is ON, engine OFF.
External Bluetooth® devices
are OFF.
All electrical loads are OFF.
Select retry and follow the
on screen instructions.
“Retry” may not go through
on first attempt and can be
selected more than once.
Figure 5B
If reprogramming does not complete and the “X” icon displays as shown in
Figure 6B:
Check battery voltage
(12.0 – 15.5 V).
CONSULT A/C adapter is
plugged in.
Ignition is ON, engine OFF.
Transmission is in Park.
All C-III plus / VI cables are
securely connected.
All C-III plus updates are
installed.
Select Home, and restart
the reprogram procedure
from the beginning.
Figure 6B
23/28
NTB15-086g
11. Follow the on-screen instructions to Erase All DTCs.
12. When the entire reprogramming process is complete, the screen in Figure 7B will
display.
13. Verify the before and after part numbers are different.
14. Print a copy of this screen (Figure 7B) and attach it to the repair order for warranty
documentation.
15. Select Confirm.
31036 - _ _ _ _ _
Step
13
31036 - _ _ _ _ _
Step
14
Step
15
Figure 7B
16. Return C-III plus to the Home screen.
17. Turn OFF C-III plus and the vehicle ignition.
18. Disconnect C-III plus from the vehicle.
24/28
NTB15-086g
PARTS INFORMATION
DESCRIPTION
CVT ASSEMBLY (1)
PART NUMBER
(2)
QUANTITY
1
VALVE ASSEMBLY KIT-CONTROL
(valve body)
31705-28X9B
1
Valve Assembly Kit-Control includes:
VALVE ASSEMBLY-CONTROL (3)
STRAINER ASSY-OIL AUTO TRANS
GASKET-OIL PAN
BRACKET (for temperature sensor)
BAND (zip tie for sensor bracket)
SEAL-LIP
SEAL, O-RING (fluid filler plug gasket)
WASHER-DRAIN
NS-3 CVT Fluid (4) (5)
Lens Swab (6)
1
1
1
1
1
1
1
11026-JA00A
999MP-NS300P
J-51963 (Shop supply)
1
As needed
As needed
(1) If the CVT assembly is being replaced, no other parts in the table above, except NS-3
CVT fluid or equivalent, are needed.
(2) Refer to the electronic parts catalog (FAST or equivalent) for the correct part number.
(3) Includes QR Label and CD-R.
(4) For warranty repairs, Nissan NS-3 CVT Fluid must be used. For customer pay repairs,
Nissan
NS-3 CVT Fluid or an equivalent is recommended.
(5) NS-3 CVT Fluid can be ordered through the Nissan Maintenance Advantage program:
Phone: 877-NIS-NMA1 (877-647-6621) or Website: Order via link on dealer portal
www.NNAnet.com and click on the “Maintenance Advantage” link.
(6) Lens swabs are available from Tech•Mate online: www.nissantechmate.com, or by
phone: 1-800-662-2001.
Tech Cam J-51951
Lens swab J-51963
(not part of J-51951)
Figure 8B
Remove protective
film before first use
Additional kits and components of Tech Cam J-51951 are available from Tech•Mate online:
www.nissantechmate.com, or by phone: 1-800-662-2001.
25/28
NTB15-086g
CLAIMS INFORMATION
NOTE: Refer to CVT Assembly Replacement Approval Procedures (on page 28) before
submitting a claim.
If belt condition shows no signs of belt slip, OK
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
RPL CVT CONTROL VALVE ASSY
PFP
(1)
OP CODE SYM DIA FRT
JD48AA
ZE
32
(2)
(1) Reference the Parts Information Table and use the applicable Control Valve Assembly
Part Number (31705-*****) as the Primary Failed Part.
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
NOTE: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.
And
DESCRIPTION
OP CODE
FRT
Inspect CVT Belt, Belt = OK
JX37AA
0.3
And; if TCM requires reprogramming
OPERATION
PFP
TCM Reprogramming
(3)
OP CODE SYM
JE99AA
ZE
DIAG
FRT
32
(4)
(3) Refer to the electronic parts catalog (FAST or equivalent) and use the TCM part number
(31036 - *****) as the PFP.
(4) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
NOTE: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.
Claims Information continued on the next page.
26/28
NTB15-086g
CLAIMS INFORMATION (continued)
If belt inspection shows signs of belt slip, NG
MODEL
Altima
DESCRIPTION
PFP
JD01AA
JD023A
CVT R&R
Rogue
Altima/
Rogue
OP CODE SYM DIA FRT
(2)
(1)
CVT TROUBLE DIAGNOSIS
ZE
32
JX22AA
0.5
(1) Reference the electronic Parts Catalog (FAST or equivalent) and use the CVT assembly
part number for the vehicle being repaired as the Primary Failed Part.
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
NOTE: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.
And
DESCRIPTION
OP CODE
FRT
Inspect CVT Belt, Belt = NG (Includes control valve R&I)
JX36AA
2.2
And; if TCM requires reprogramming
OPERATION
PFP
TCM Reprogramming
(3)
OP CODE SYM
JE99AA
ZE
DIAG
FRT
32
(4)
(3) Refer to the electronic parts catalog (FAST or equivalent) and use the TCM part number
(31036 - *****) as the PFP.
(4) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
NOTE: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.
27/28
NTB15-086g
CVT Assembly Replacement Approval Procedures
If CVT belt inspection indicates CVT assembly replacement is required:
a. Complete the PCC CVT Preauthorization Form in ASIST.
b. Attach the required video (15 seconds or less) to the CVT Preauthorization
Form.
Failure to submit a continuous video showing evidence of belt slip and the
VIN will cause immediate denial of request for CVT unit replacement.
c. Call the PCC for authorization at 800-973-9992 (opt 2).
IMPORTANT: Make sure the video has a clear image of the VIN on the F.M.V.S.S.
certification label (VIN label).
28/28
NTB15-086g
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB15-086g
Replacement Service Bulletin Number:
MFR Communication Date: 2017-04-18
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN:AUTOMATIC TRANSMISSION
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.