(8)ACURA

Service Bulletin

March 7, 2017

17-013
05907 Version 1

2017 MDX Sport Hybrid: TQI and New Model Service Information
AFFECTED VEHICLES
Year

2017

Model

MDX Sport Hybrid

Trim Level

With Technology Package
With Advance Package

INTRODUCTION

This bulletin covers the total quality inspection (TQI) of the 2017 MDX Sport Hybrid. It includes these procedures:
1.

Remove the Exterior Protective Coatings

10.

Check the Power Control Unit (PCU) Coolant Level

2.

Install the Fuses

11.

Initialize the Audio-Navigation Unit Anti-Theft
Function, and Set the AM/FM Audio Unit Presets

3.

Remove the Interior Protective Coverings

12.

Check/Refresh SiriusXM® Radio Dealer Demo
Service (Except in Alaska and Hawaii)

4.

Install the Floor Mats

13.

Check the ACC, Collision Mitigation Braking
System™/Forward Collision Warning, LKAS, Lane
Departure Warning/Road Departure Mitigation, and
Auto Idle Stop Indicators

5.

Check the 12-Volt Battery

14.

Check the Head-Up Warning (HUW) Indicator

6.

Install the Body Plugs

15.

Check B/uetooth®HandsFreelink® (HFL)

7.

Install the Front License Plate Holder

16.

Check the Moon roof One-touch Feature

8.

Set the Tire Pressures

17.

Reset the Acuralink Control Unit

9.

Do the PCM Idle Learn Procedure

To do the TQI for the navigation system, be sure to complete S/B 17-014, 2017 MDX Sport Hybrid: TQI of the
Navigation System.

CLIENT INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment,
and training to correctly and safely maintain your vehicle. These procedures should not be attempted by "do-it-yourselfers," and you should not
assume this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies,
contact an authorized Acura automobile dealer.

© 2017 American Honda Motor Co., Inc. - All Rights Reserved

Page 1 of 12

This bulletin also includes this new model service information:
1.

Heated Windshield (Advance Trim)

6.

Real Wood Surfaces (Advance Trim )

2.

Auto High Beams

7.

Charge and Data Ports

3.

Surround View Camera (Advance Trim)

8.

Capless Fuel System

4.

Walk-Away Auto Lock

9.

Electric Parking Brake (EPB)

5.

Power Folding Mirrors

10.

Automatic Brake Hold System

CLAIM INFORMATION
Reimbursement Time: 1.4 hours
NOTE: This time includes the TQI of the navigation system.

TQI PROCEDURES

Before Starting
Review these items:
•

Perfect Delivery documents, especially the information on battery maintenance and tire pressures

•

TQI checklist in the maintenance journal

Make sure you record the TQI on the appropriate pages of the maintenance journal. The TQI is not done until this
bulletin and the TQI checklist are both complete. Note on the repair order any repairs or problems that cannot be fixed
within a few minutes.
Remove all TQI items from the cargo area and glove box.
To lower parasitic draw, the vehicle comes from the factory with the No. 15 RADIO (20 A) and No. 16 BACKUP (10 A)
fuses removed from the main under-hood fuse box. With them removed, the engine will not start when you apply the
brake pedal and press the ENGINE START/STOP button.
To start the engine with these fuses removed, you must do this:
1.

Press the ENGINE START/STOP button once.

Page 2 of 12

2.

When the indicator blinks, touch the keyless remote to the ENGINE START/STOP button.

The indicator will switch from blinking to steady when communication is complete.

3.

Start the engine by pressing the ENGINE START/STOP button while pressing the brake pedal. You must start
the engine within 10 seconds of touching the remote to the button.

1. Remove the Exterior Protective Coatings
Carefully remove all of the exterior protective coatings. See S/B 96-009, Removal of Protective Coatings During TQI.

2. Install the Fuses
To lower battery drain during vehicle shipping, the No. 15 RADIO (20 A) and No. 16 BACKUP (10 A) fuses are removed
from the main under-hood fuse box and stored in the glove box. Make sure the ignition is turned to OFF before installing
these fuses.
No. 15 RADIO (20 A)

No. 16 BACKUP (10 A)

Page 3 of 12

Vehicle Interior

3. Remove the Interior Protective Coverings
There are several protective coverings on the interior trim pieces and some areas of the carpet. Carefully remove all of
them with clean hands to avoid soiling any surfaces.
To remove the protective covering from the leather-wrapped steering wheel, pull the top of the covering toward you.
Do not try removing it by pulling the top away and down from you, or you will damage the cable reel. Also, do not use
any cutting tools to remove the covering; you could damage the leather.
If any of the interior is dirty, clean it with mild soap or an Acura cleaning product such as Leather & Vinyl Cleaner
(P/N 08700-9214A) or Carpet Spot Remover (P/N 08700-921 SA). Clean real wood surfaces (Advance trim only) with a
mild detergent and a soft, damp cloth. Be sure to wipe off any excess liquid to avoid damaging the wood. Do not use
other cleaning agents on this wood; such products could damage it.

4. Install the Floor Mats
Install the floor mats where they belong. Be sure to place the eyelets in the driver's and front passenger's floor mats
over the anchors in the floor and turn the knobs clockwise to the lock position. Also, do the same for the second row
floor mats. The anchors for those mats are under the front seats.

LOCKED

@)
UNLOCKED

Under-Hood (Engine Cold)

5. Check the 12-Volt Battery
This vehicle comes with an absorbent glass mat (AGM) 12-volt battery. To ensure long battery life and that the client
gets a fully charged battery as outlined in S/B 89-006, Battery Maintenance at Dealers, it must be checked at these
times:
•

When the vehicle first arrives at the dealership

•

During the TQI (if done at a later date)

•

At regular intervals

•

Just before vehicle delivery

If you plan to keep the vehicle in long-term storage, be sure to remove the No. 16 BACKUP (10 A) fuse.

Page 4 of 12

To access the battery, you must first remove the front bulkhead cover. To do that, follow these steps:
1.

Starting on the passenger side, lift up the far edge of the cover. You will hear a pop as the striker in the cover
releases from the latch in the body.

10 FASTENERS

2.

Using even, upward pressure, continue releasing the strikers from the latches, working your way toward the
driver's end of the cover. There are a total of 10 strikers and latches.

3.

Make sure all of the strikers and latches remain in place. Use the Striker/Latch Kit (P/N 06910-TZS-AOO)
to replace any that are missing or damaged.

Test the battery with the ED-18 battery tester using S/B 88-016, Battery Testing and Replacement. Make sure the
ED-18 has the latest software installed before using it. See S/B 09-027, ED-18 Battery Tester Update Information.
If the test results show GR8 DIAGNOSTIC NEEDED, you must charge the battery with the GR8 battery diagnostic
station. Make sure the GR8 has the latest software installed before using it. See S/B 09-034, GRB Battery Diagnostic
Station Update Information.
NOTE: When charging an AGM battery, always select AGM Battery. Serious damage can result if you select Standard
Battery (FLA). Also, make sure the negative battery lead is connected to the negative battery post. The temperature
probe is in the handle of the negative lead. The GR8 monitors battery temperature during charging so that it does not
overheat and destroy the battery. See the ServiceNews article "AGM Battery Testing and Charging Precautions," posted
in May 2015, to learn more about it.
Write down the GOOD BATTERY 10-digit code in the maintenance journal. During the TQI, write down the code in the
"Under Hood (Engine Cold)" section. Then, at vehicle delivery, test the battery again, charge if needed, and write down
the new code in the "Final Inspection (At Delivery)" section.

Page 5 of 12

To install the front bulkhead cover, place it into position, then press down firmly at each striker location until you hear a
click. Be sure the bulkhead center section outer corners are tucked under the grille seal.

Vehicle Exterior (Vehicle Raised to Full Height)

6. Install the Body Plugs
Install the body plugs on each side of the vehicle as shown.

PASSENGER SIDE SHOWN

BODYPWG (BOTH SIDES) ~

REAR WHEEL

Page 6 of 12

Vehicle Exterior (Vehicle Lowered to Half-Height)