Technical Bulletin
Model(s)

Year

Eng.Code

Trans. Code

VIN Range From

VIN Range To

Jetta

2002 - 2010

All

All

All

All

Jetta Wagon

2002-2005

All

All

All

All

Golf

2002- 2009

All

All

All

All

Sportwagen

2009

All

All

All

All

Passat

1998 - 2010

All

All

All

All

Passat Wagon

1998 - 2010

All

All

All

All

Condition
55 16 13 July 13, 2016 2039446 Supersedes Technical Bulletin V551612 dated June 9, 2016 to clarify 2002 thru
2005 Jetta Wagon applicability.
Corrosion Hood Edge

Corrosion may be found on the folded edge of the hood. The corrosion may be found on this edge anywhere
around the hood.

Page 1 of 8
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
Procedures Manual.
Documentation required per Warranty Policies and Procedures Manual.
For vehicles outside of the Limited Warranty Against Corrosion Perforation this Technical Bulletin is for
information only.

Technical Background
Not applicable.

Production Solution
Not applicable.

Page 2 of 8
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Service
A. Repair Edge Corrosion on the Hood
•

Remove the Hood from the vehicle. See Repair Group 55 in Elsa.

•

Remove the corrosion with Pneumatic Brush Grinder Set -VAS6446 or similar tool.

•

Sand the overlapping areas with P360 - P400 sandpaper.

•

Clean the base surface with a voe compliant cleaning solution.

•

After a corrosion repair and before sealing, insulate the base surface with a Two-Part Wash Primer and then
fill with Two-Part HS Performance Filler. (Both Locally Sourced).

•

After the filler has dried, the filled area must be dry sanded with P400- PS00. While doing so, make sure to
avoid "sanding through". Then clean the sanded areas with a voe compliant cleaning solution.

•

After the filler has dried and has been sanded, the metal edges in the fold area must be thinly sealed with
Polyurethane adhesive -AKD 476 KOS 05.

•

Paint the hood according to Volkswagen specifications.

•

Install the hood on the vehicle. See Repair Group 55 in Elsa.

© Note:
•

When repairing , the seam sealant is to be returned to replicate stock visual appearance and layer thickness.

•

In order to avoid damage and malfunctions , seam sealant must be applied smoothly in the area of attached
components.

•

Water drain holes must remain free.

B. Replace Hood due to Through-Corrosion (Perforation)
© Note:
If through-corrosion (perforation) is not present, hood replacement will only be accepted if it qualifies per the
Reimbursement Policy section of the Warranty Policies and Procedure Manual. This section provides important
guidelines when considering component repair vs . replacement options (the "80% rule") .
•

Paint the new hood according the Volkswagen specifications.

•

Remove the old hood. See Repair Group 55 in Elsa.

•

Install new hood. See Repair Group 55 in Elsa.

Page 3 of 8
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Warranty

CD Note:
•

Dealers may complete the repair as described without prior authorization (through a WISE Warranty Repair
Acceptance request).

•

Documentation required : Clear pictures , completed estimate and body shop invoice must be saved and kept
on file at the Dealership for audit purposes .

•

Labor time units (TU), Material units (MU), and Material unit rate are correct at the time of publication. The
time units and/or material units may differ if the repair catalogue is updated. The information in the repair
catalogue applies , except for the open time items (labor operations ending in 99) which are calculated at
actual time multiplied by the body shop labor rate . The material allowance (Paint material price per unit) is
subject to change. Refer to WISE> Resource Center> Forms > Paint/Corrosion for the most current
forms.

•

This section is applicable for vehicles within the terms of Volkswagen 's Limited Warranty Against Corrosion
Perforation. For vehicles outside the terms of the Limited Warranty Against Corrosion Perforation this section
is for information only.

•

This bulletin may be provided to outside shops to ensure the proper repair is completed .

CD Note:
Claim Processing
Utilize the attached form examples and pre-populated forms on WISE to assist with calculating the
reimbursement amounts . This will expedite the claim review process and reduce the time to pay the claim .
Note that miscalculations are subject to claim adjustment. You can email completed excel forms (in the excel
format) to paintcamp@vw.com. The Paint and Corrosion Team will review your completed form(s) and adjust for
overlap on behalf of the dealer.
For the complete set of pre-populated Paint/Corrosion Claim Form templates associated with this Technical
Bulletin , refer to WISE> Resource Center> Forms> PainUCorrosion.

Page 4 of 8
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
Procedures Manual 1>
Model(s)

Year(s)

Eng. Code(s)

Trans. Code(s)

VIN Range From

VIN Range To

Jetta

2002 - 2010

All

All

All

All

Jetta Wagon

2002-2005

All

All

All

All

Sportwagen

2009

All

All

All

All

Golf

2002 - 2009

All

All

All

All

Passat

1998 - 2010

All

All

All

All

Passat Wagon

1998 - 2010

All

All

All

All

SAGA Coding
160 1>

Claim Type:

HST

Damage Location
(Depends on Service
No.)

--

020

Damage
Service Number:
Code
5522

0003

Parts Manufacturer

Jetta (9M2, 1K2), Jetta Wagon
1JG), Sportwagen (1 KS)

020

2>

Passat (3B2,3B3,3C2),

020

2>

020

2>

Passat Wagon (385, 3B6,3C5)
AS Golf (981,1K1)
Repair
Please use the following part number in "Outside Materials" 4>
LACKMA TF: Paint and Materials

MU @ $12 per unit

2 Part Wash Primer

Claim Dollar Amount (MAX: $40)

2 Part HS Performance Filler

Claim Dollar Amount (MAX: $40)

Page 5 of 8
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Please use the following Labor Operation in "Outside Labor"

4>

Select the appropriate Labor Operation below:
- L0010000: External Painting-straight color
Claim Dollar Amount
- L0020000: External Painting-metallic/2-layer
- L0030000: External Painting-pearl color
Use this for all body repair in this bulletin:
Claim Dollar Amount
- A0041000: Body Shop repair no paint
Replace
Please use the following part number in "Outside Materials"
LACKMA TF: Paint and Materials

4>

MU @ $12 per unit

Please use the following Labor Operation in "Outside Labor"

4>

Select the appropriate Labor Operation below:
- L0010000: External Painting-straight color
Claim Dollar Amount
- L0020000: External Painting-metallic/2-layer
- L0030000: External Painting-pearl color
Use this for all body repair in this bulletin:
Claim Dollar Amount
- A0041000: Body Shop repair no paint
Causal Part:

L00#0000
Diagnostic Time

GFF Time expenditure

01500000 = 00 TU max.

Road Test

01210002 = 00 TU

4>

NO

NO
01210004 = 00 TU
Technical Diagnosis

01320000 = 00 TU

NO

Claim Comment: Input "As per Technical Bulletin 2039446" in comment section of Warranty Claim.
1> For

Vehicles outside the Limited Warranty Against Corrosion Perforation this bulletin is information

only

Page 6 of 8
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
2

> Corrosion

3

> Labor

4

> Documentation