NHTSA ID Number: 10102803
Manufacturer Communication Number: LTB00648NAS1
TSB/Document Date: 2017-06-02
Summary
"SITUATION: THE FOLLOWING SYMPTOMS MAY OCCUR: ENGINE WILL NOT START; TOUCH SCREEN INOPERATIVE; WINDOWS INOPERATIVE; SEATS IN INCH MODE; AND/OR CLIMATE CONTROL PANEL NOT ILLUMINATED OR NON-RESPONSIVE. CAUSE: THESE MAY BE CAUSED BY TERMINAL BLOCK C44-R2 PINS 10, 17, 18, AND/OR 21 HAVING POOR CONTINUITY."
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- MaxLife Technology prevents engine breakdown with 40% better...
- Includes seal conditioners to reduce oil consumption and oil...
- Added detergents reduce sludge, corrosion, rust and deposits...
- Advanced friction-fighting additives help maximize...
- Meets or exceeds all requirements of ILSAC GF-6A, API SP...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: LTB00648NAS1
Replacement Service Bulletin Number:
MFR Communication Date: 2014-11-17
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:ELECTRICAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
Page 1 of 12
TECHNICAL BULLETIN
LTB00648NAS1
17NOV2014
© Jaguar
Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools, and
equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you
are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Land Rover service facility to
determine whether this bulletin applies to a specific vehicle.
SECTION: 418-02
Harness Repair Terminal Block C44-R2
AFFECTED VEHICLE RANGE:
Range Rover (LG)
Model Year:
2013
VIN:
DA108006-DA118089
MARKETS:
NAS
CONDITION SUMMARY:
Situation: The following symptoms may occur:
• engine will not start;
• Touch Screen inoperative;
• windows inoperative;
• seats in inch mode; and/or
• climate control panel not illuminated or non-responsive.
Cause: These may be caused by terminal block C44-R2 pins 10, 17, 18, and/or 21 having poor continuity.
Action: If during diagnosis of the issue terminal block C44-R2 is suspected to have poor continuity, follow the service
instruction outlined below. If during diagnosis of the issue terminal block C44-R2 is not suspected to have poor
continuity, continue with diagnosis with reference to Symptom Driven Diagnostics and TOPix
PARTS:
,{ )NOTE: Each of the part number is supplied in packs containing ten or more pieces sufficient for several
vehicles.
6
NOTE: All four terminals may not require replacing; only use the quantity of terminals required for the
repair.
418107
Splice joint connector
Quantity: 4
41841145
Repair terminal
Quantity: 4
418112
Identification sleeve
Quantity: 4
TOOLS:
http://topix.landrover.jlrint.com/topix/service/document/5 08315
12/2/2014
Page 2 of 12
Crimping pliers
418-116A
El6 4242
,.,•.,
Insulation stripper
418-117
El64243
WARRANTY:
6
NOTE: Repair procedures are under constant review, and therefore times are subject to change; those
quoted here must be taken as guidance only. Always refer to TOPix to obtain the latest repair time.
A
~OTE: DDW requires the use of causal part numbers. Labor only claims must show the causal part
number with a quantity of zero.
6
DESCRIPTION
SRO
TIME (HOURS)
CONDITION CODE
CAUSAL PART
Harness - Tailgate - Repair -
86.71.89.51
1.9
42
LR046858
NOTE: Normal Warranty procedures apply.
SERVICE INSTRUCTION:
6
NOTE: Removal steps in this Service Instruction may contain installation details.
1. Remove the Sun Visor (see TOPix Workshop Manual, section 501-05).
2. ~
NOTE: The step must be carried out on both sides.
Remove both A-pillar trim panels (see TOPix Workshop Manual, section 501-05).
3. 6
NOTE: The step must be carried out on both sides.
Remove both B-pillar trim panels (see TOPix Workshop Manual, section 501-05).
4. 6
NOTE: The step must be carried out on both sides.
Remove both C-pillar trim panels (see TOPix Workshop Manual, section 501-05).
5. ~
NOTE: The step must be carried out on both sides.
Remove both D-pillar trim panels (see TOPix Workshop Manual, section 501-05).
6. Remove the overhead console (see TOPix Workshop Manual, section 501-12).
http://topix.landrover.jlrint.com/topix/service/document/5 08315
12/2/2014
Page 3 of 12
7. 6
NOTE: Note the orientation of the seal prior to
detaching.
Reposition the tailgate seal.
8. ~
NOTE: The step must be carried out on both
sides.
Remove the roof handle and position the front door seal
to one side.
•
Torque: 6 Nm
9. ~
NOTE: The step must be carried out on both
sides.
Remove the roof handle and position the rear door seal
to one side.
•
Torque: 6 Nm
http://topix.landrover.jlrint.com/topix/service/document/5 08315
12/2/2014
Page 4 of 12
E156889
10. ~
NOTE: The step must be carried out on both
sides.
Remove the interior lamp cover.
El56894
11. ~
NOTE: The step must be carried out on both
sides.
Remove the interior lamp cover retaining bolt.
•
Torque: 6 Nm
http://topix.landrover.jlrint.com/topix/service/document/5 08315
12/2/2014
Page 5 of 12
12. ~
NOTE: The step must be carried out on both
sides.
6
NOTE: If equipped.
Remove the roof air vents.
13. ~
NOTE: The step must be carried out on both
sides.
l : lNOTE: If equipped.
Remove the roof air vent fixings.
•
Torque: 6 Nm
http://topix.landrover.jlrint.com/topix/service/document/5 08315
12/2/2014
Page 6 of 12
14.
6
I
•
CAUTION: Take extra care not to damage the component.
NOTE: The step must be carried out on both sides.
it!:lNOTE: If equipped.
Detatch the headliner retainers as illustrated.
http://topix.landrover.jlrint.com/topix/service/document/5 08315
12/2/2014
Page 7 of 12
15 . .&, CAUTION: Take extra care not to damage the component.
!
CAUTION: Using a suitable plastic trim tool, release the magnetic fixings.
&
.CAUTION: Make sure that there is at least 50mm clearance between the magnetic fixings and the
headliner during the removal procedure. The fixings will engage if too close to each other.
Remove the headliner retaining clips as shown.
http://topix.landrover.jlrint.com/topix/service/document/5 08315
12/2/2014
Page 8 of 12
0
16. Remove the headliner retaining clips as illustrated.
http://topix.landrover.jlrint.com/topix/service/document/5 08315
12/2/2014
Page 9 of 12
17. ~
CAUTION: Take extra care not to damage the component.
Lower the headliner.
http://topix.landrover.jlrint.com/topix/service/document/5 08315
12/2/2014
Page 10 of 12
18. Disconnect the electrical connector C44-R2 from C44-Rl.
http://topix.landrover.jlrint.com/topix/service/document/5 08315
12/2/2014
Page 11 of 12
19. Remove the terminals in the positions 10, 17, 18, and 21 and carry out a pin drag test with each corresponding
terminal of connector C44-Rl.
•
•
If any of the terminals show no sign of resistance to movement during the test, continue to step 20.
If any of the terminals offer a small amount of resistance, refit the original terminals to connector C44-R2 and
carry out a continuity test across the two connectors.
• If the joint has good continuity, continue with further diagnosis with reference to TOPix and SDD.
20. & ..CAUTION: To reduce the chance of incorrect
wiring of the harness, repair only one wire at a
time.
Carry out the wiring repair (see TOPix Workshop Manual
section 418-02). Remove any terminals found to be
faulty by diagnosis in step 19 and install a new terminal
as required (41841145). Make sure a sufficient length of
wire is left on the electrical harness so the new terminal
can be installed correctly using the recommended splice
connector (418107). Make sure the correct black
identification sleeve (418112) is fitted to the new
terminal.
CICJCJCJCICICJ
n
CJCJCICICJ LI
El 6230 9
http://topix.landrover.jlrint.com/topix/service/document/5 08315
12/2/2014
Page 12 of 12
21. Install connector C44-R2 to C44-Rl and check for correct continuity across the connector before continuing.
22. To install, reverse steps 1-17.
http://topix.landrover.jlrint.com/topix/service/document/5 08315
12/2/2014
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Resets: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA AutoAuth access for Chrysler, Jeep, Dodge, and Fiat (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA AutoAuth account is not included with the device. Users must register and pay separately through the official FCA AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Save $500+/Year with Pro-Level Diagnostics -No Subscriptions: The Portable XTOOL Anyscan A30D OBD2 scanner diagnostic tool includes free lifetime software updates for all app service functions, without extra cost. With a single payment, enjoy full access to diagnostics, relearn scan tools, and maintenance features. A cost-effective, smart choice for car owners and DIY enthusiasts, compatible with vehicles from 1996 onward. Please provide the car VIN and the special functions you need in advance so that we can confirm compatibility
- Bi-Directional Control for Faster Troubleshooting: Unlike a basic code reader, the A30D bi directional scan tool sends commands directly to your vehicle’s ECU to actively test components like fuel pump, valves, wipers, windows, doors, sunroof, and headlamps right from your smartphone. See component responses in real time without disassembly—perfect for brake jobs, electrical issues, and hard-to-find problems. This bidirectional obd2 scanner helps pinpoint faults faster, reduce guesswork, and avoid replacing good parts. An efficient, easy-to-use car scanner diagnostic tool built for DIYers, home garage users, and small-shop technicians who want real two-way scanner, not just codes
- 19 Reset Functions for Routine Maintenance: The A30D car diagnostic scanner provides 19 relearn functions without extra charges, including EPB Reset for parking brake replacement, TPMS Reset after tire changes, ABS Auto Bleeding, Oil Reset, SAS Reset, BMS Reset, Throttle Relearn, Injector C0ding, Gear Learning, Crank/Crankshaft/Cam/Ckp Sensor Relearn Tool, Transmission Match, Seat Calibration, Airbag Repair and more. This XTOOL A30D automotive scanner diagnostic tool supports preventive care, helping extend vehicle life and reduce costly shop visits. Functions vary by vehicle make and year—plz confirm compatibility before purchase
- Stable BT Connection & All-System & 8 Pids Live Data: The A30D wireless OBD2 scanner delivers a fast and stable wireless connection up to 33 feet, letting you move freely around the vehicle without tangled cables. Pair with with Android 9.0+ and iOS 10.0+ devices to turn your phone into a mobile auto scanner—perfect for home garages, driveways, or on-the-spot repairs. This full system scanner for cars provides real-time access to all major modules, including Engine, Gearbox, ABS, SRS, AC and more. with clear graphs, meters, and up to 8 PIDs displayed at once. This car code reader makes system monitoring visual, simple, easy to understand, and offering data logging for playback and deeper
- Wide Compatibility with CAN-FD & FCA Support: The A30D car computer diagnostic reader works with most 1996 and newer vehicles with a standard OBD2 port, including for Ford, for GM, for Toyota, for Honda, for Nissan,for Hyundai etc, with ongoing updates covering more car models and functions later. It also supports newer communication protocols like CAN-FD and FCA AutoAuth (Personal AutoAuth account and active subscription required, not included with the device!for Chrysler, for Dodge, for Jeep, for Fiat models). It is a future-ready automotive scanner diagnostic tool for households with multiple vehicles or part-time techs. Coverage vary by cars, plz check the compatibility first
- 2026 Latest Version – Now Upgraded from 32GB to 64GB: XTOOL D7 obd2 scanner diagnostic tool with bidirectional is designed for DIY enthusiasts, professional mechanics. It now offers 64GB storage for smoother operation. Its 5000mAh battery (with 2500mAh 7.3V fast-charging) supports all-day use. With FCA, CAN FD, and DOIP protocol support, it covers more vehicle models and newer systems. A newly added battery voltage reading shows battery status before diagnostics, helping prevent low-voltage tests that could harm the vehicle. The V2.0 Diagnostic Report allows shops to personalize results with logos, customer details, and attachments to build trust and maintain records.
- Save $500+/Year with Pro-Level Diagnostics: Whether you're a DIYer, starting a repair business, or beginning work at an auto shop, XTOOL D7 car scanner offers advanced features typically found only in expensive professional OBD2 scanners - without the high price tag. With 4,000+ Active Tests & Bidirectional Pids, 36+ Special Functions, advanced module resets like SRS Reset, OE-level All-System Scan (one-click), FCA AutoAuth, CAN FD, DoIP, data export, and 8 PIDs graphing, the D7 auto scan tool covers 100,000+ vehicles (excluding Indian models). Includes 3-Year updates and supports the XV200 endoscope to detect em!ssions and intermittent issues.
- Full Bidirectional Advantage Over Other Code Readers & Scan Tools: The XTOOL D7 automotive scanner offers true bidirectional control plus advanced bidirectional PIDs, letting you send commands to components like A/C clutches, fuel injectors, windows, fans and more, while monitoring sensor responses live to catch elusive issues (even those without warning lights). Unlike budget bidirectional obd2 scanners limited to basic active tests,the D7 car fault scanner gives you full bidirectional control to run ABS pump tests, throttle position, turn fan on/off and solenoid tests, etc. No guessing, no extra fees—just smarter diagnostics
- OE-Level Full System Car Diagnostic Scanner with 8 Live Data Graphs: The XTOOL D7 is a pro-grade diagnostic tool that gives you full access to all vehicle systems—just like Snap on scanners & the factory scan tools, it delivers deep, accurate diagnostics you can trust. Easily view live data streams, retrieve freeze frame, and run active tests to pinpoint issues fast. With the ability to graph up to 8 PIDs at once, you can spot performance trends and troubleshoot like a pro. Whether you're a mechanic or car owner, with the D7 auto scanner you can stay ahead of problems and keep your vehicle running at its best
- High-value Automotive Scanner Diagnostic Tool with 36+ Special Function, Module Resets, Relearns, Calibrations, Adaptations & Initializations: XTOOL D7 diagnostic tool packs 36+ common & advanced maintenance, skip the $150 fee for battery registration after replacement, throttle body relearn after cleaning, or TPMS resets post-rotation, Auto bleed after the pad changes, or Electronic Parking Brake. Need to reset the transmission after towing? Crank sensor relearn for GM/for Dodge? Done. D7 also covered advanced functions like Ad~blue Reset, VIN Write, and many more professional OBD2 scanner functions that we can't list here. Text us your VIN + what you need, we’ll check the compatibility
This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API