NHTSA ID Number: 10102185
Manufacturer Communication Number: LTB00660NAS2
TSB/Document Date: 2017-06-01
Summary
"SITUATION: THE FRONT AND/OR REAR PARKING AID SYSTEM MAY BE INOPERATIVE. CAUSE: THIS MAY BE CAUSED BY A CORRODED WIRING HARNESS AT THE FRONT AND/OR REAR BUMPER HARNESSES."
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- ✔️【PREMIUM QUALITY】Thick copper barrel ensures...
- ✔️【DURABILITY】Each terminal features a thick tinned...
- ✔️【WATERPROOF】Insulation tubing has unique...
- ✔️【WIDE APPLICATIONS】Compliant with all electrical...
- ✔️【TICONN BRAND QUALITY COMMITMENT】We stand behind...
- Tinned Copper Core: Butt connectors use a heavy-duty copper...
- Package Includes: 100Pcs Blue heat shrink butt connectors...
- Solderless Crimping: Insert the wires to be connected, crimp...
- 3:1 Shrink Ratio: Marine grade heat shrink tubing provides...
- Wide Application: Wire connectors are waterproof, stable...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: LTB00660NAS2
Replacement Service Bulletin Number:
MFR Communication Date: 2014-09-25
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: PARKING BRAKE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
Page 1 of 10
TECHNICAL BULLETIN
LTB00660NAS2
25 SEP 2014
© Jaguar
Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools,
and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some
vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-ityourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Land
Rover service facility to determine whether this bulletin applies to a specific vehicle.
This reissue replaces all previous versions. Please destroy all previous versions. Only refer to the
electronic version of this Technical Bulletin in TOPix.
Changes are highlighted in gray
SECTION: 418-02
Front/ Rear Bumper Harness Protective Sleeve
AFFECTED VEHICLE RANGE:
LR4 (LA)
Model Year:
VIN:
2010-2013
AA510178-DA664194
Range Rover Sport (LS)
Model Year:
2010-2013
VIN:
AA215623-DA790203
LR2 (LF)
Model Year:
VIN:
2008 Onwards
8H000212 Onwards
Range Rover Evoque (LV)
Model Year:
2012 Onwards
VIN:
CH000447 Onwards
Range Rover Sport (LW)
Model Year:
2014 Onwards
VIN:
EA000002 Onwards
Range Rover (LG)
Model Year:
2013 Onwards
VIN:
DA000083 Onwards
Range Rover (LM)
Model Year:
2010-2012
VIN:
AA302697-CA393639
MARKETS:
NAS
CONDITION SUMMARY:
Situation: The front and/or rear Parking Aid system may be inoperative.
Cause: This may be caused by a corroded wiring harness at the front and/or rear bumper harnesses.
Action: Should a customer express this concern, follow the appropriate Service instruction [A or BJ outlined
below.
PARTS:
LR060969
Protective sleeve - Front bumper harness - Range
https ://topix.landrover.jlrext.com/topix/service/document/49 8512
Quantity: 2
10/3/2014
Page 2 of 10
Rover Evoque (L538), Range Rover (L322)
LR060969
Protective sleeve - Front bumper harness - LR2 (L359),
LR4 (L319), Range Rover Sport (L320, L494)
Quantity: 1
LR060970
Protective sleeve - Rear bumper harness
Quantity: 1
-
TOOLS:
No Tools Required
WARRANTY:
,6 ,
NOTE: Repair procedures are under constant review, and therefore times are subject to change;
those quoted here must be taken as guidance only. Always refer to TOPix to obtain the latest repair
time.
,6
NOTE: DDW requires the use of causal part numbers. Labor only claims must show the causal part
number with a quantity of zero.
DESCRIPTION
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
Protective sleeve - Front bumper harness - Install LR2 (L359) - 2008-2010MY
86.71.89.53
1.0
42
LR040145
Protective sleeve - Front bumper harness - Install LR2 (L359)- 2011MY+
86.71.89.53
1.10
42
LR040145
Protective sleeve - Rear bumper harness - Install LR2 (L359)
86.71.89.54
1.20
42
LR040105
Protective sleeve - Front bumper harness - Install LR4 (L319)
86.71.89.53
1.30
42
LR030234
Protective sleeve - Rear bumper harness - Install LR4 (L319)
86.71.89.54
1.10
42
LR015500
Protective sleeve - Front bumper harness - Install Range Rover Evoque (L538) - 2012-2013MY
86.71.89.53
1.90
42
LR047488
Protective sleeve - Front bumper harness - Install Range Rover Evoque (L538) - 2014MY+
86.71.89.53
1.80
42
LR047488
Protective sleeve - Rear bumper harness - Install Range Rover Evoque (L538)
86.71.89.54
1.20
42
LR047488
Protective sleeve - Front bumper harness - Install Range Rover Sport (L494)
86.71.89.53
1.30
42
LR058437
Protective sleeve - Rear bumper harness - Install Range Rover Sport (L494)
86.71.89.54
1.50
42
LR053996
Protective sleeve - Front bumper harness - Install Range Rover (L405)
86.71.89.53
1.40
42
LR053993
Protective sleeve - Front bumper harness - Install Range Rover Sport (L320)
86.71.89.53
0.90
42
LR030235
Protective sleeve - Rear bumper harness - Install Range Rover Sport (L320)
86.71.89.54
0.80
42
LR016237
Protective sleeve - Front bumper harness - Install Range Rover (L322)
86.71.89.53
1.40
42
LR031084
Protective sleeve - Rear bumper harness - Install Range Rover (L322)
86.71.89.54
0.80
42
LR032271
6 ,NOTE: Normal Warranty policies and procedures apply.
SERVICE INSTRUCTION A - Front Bumper Harness
n
NOTE: Prior to performing the Service Instruction, corroded or damaged wires in the front and/or
https ://topix.landrover.jlrext.com/topix/service/document/49 8512
10/3/2014
Page 3 of 10
rear bumper harness must be repaired using the harness repair kit (see TOPix Workshop Manual, section
418-02, for additional information on harness repair). To be carried out as a separate claim.
~
NOTE: After installation, the protective sleeve must be spiral taped -- not fully taped.
/ \NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
1. Remove the front bumper cover to expose the complete wiring harness (see TOPix Workshop Manual, section
501-19).
2. Location of the front Parking Aid system sensor
wiring harness.
3. ~
NOTE: There must be a minimum of
30mm between the connector and the end of
the bumper harness protective sleeve.
~
NOTE: Repeat this procedure on the four
Parking Aid system sensors.
Install the front bumper wiring harness protective
sleeve to the front Parking Aid system sensor
harness on both sides of the securing clip.
4. There must be a minimum of 30mm between the
electrical connector and the protective sleeve.
https ://topix.landrover.jlrext.com/topix/service/document/49 8512
10/3/2014
Page 4 of 10
130
mni
5. ,~
NOTE: Make sure the protective sleeve is
a minimum of 30mm from the electrical
connector.
~
NOTE: Repeat this procedure on all front
Parking Aid system sensors.
Use suitable tape to secure the end of the
protective sleeve to the front Parking Aid system
sensor wiring harness.
6. ,O ,NOTE: Repeat this procedure on all front
bumper wiring harness joints where the
protective sleeve is installed.
~
NOTE: Repeat this procedure on all front
Parking Aid system sensors.
Use suitable tape to secure the end of the
protective sleeve to the front Parking Aid system
sensor harness.
7. Wrap the main connector wiring harness in the
4.5mm protective sleeve.
https ://topix.landrover.jlrext.com/topix/service/document/49 8512
10/3/2014
Page 5 of 10
s.
/ \NOTE: There must be a minimum of
30mm between the electrical connector and
the protective sleeve.
---T
Use suitable tape to secure the protective sleeve to
the front Parking Aid system sensor wiring harness.
130
mrrj
~_J_
El 6 529B
9. ,O ,NOTE: Repeat this procedure on all
bumper wiring harness joints.
Use suitable tape to secure the end of the
protective sleeve to the front Parking Aid system
sensor wiring harness.
El 6 5 299
10. Install the front bumper cover (see TOPix Workshop Manual, section 501-19).
https ://topix.landrover.jlrext.com/topix/service/document/49 8512
10/3/2014
Page 6 of 10
11. Check the operation of the Parking Aid system.
SERVICE INSTRUCTION B - Rear Bumper Harness
LR2 (L359), LR4 (L319), Range Rover Evoque (L538), Range Rover Sport (L320, L494), Range Rover
(L322) only; NOT Range Rover (L405)
6
NOTE: Range Rover (L405) rear bumper harness is fully protected; no modification necessary.
6
NOTE: Prior to performing the Service Instruction, corroded or damaged wires in the front and/or
rear bumper harness must be repaired using the harness repair kit prior to performing the Service
Instruction (see TOPix Workshop Manual, section 418-02, for additional information on harness repair).
To be carried out as a separate claim.
6
NOTE: After installation, the protective sleeve must be spiral taped and not fully taped.
~
NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
1. Remove the rear bumper cover to expose the complete wiring harness. (see TOPix Workshop Manual, section
501-19).
2. Install the 4.5mm sleeve to the rear bumper wiring
harness.
3. l'.:JNOTE: Repeat this procedure on all
bumper wiring harness joints.
Use suitable tape to secure the end of the
protective sleeve to the rear Parking Aid system
sensor wiring harness.
https ://topix.landrover.jlrext.com/topix/service/document/49 8512
10/3/2014
Page 7 of 10
El 6 5 299
4. ,~
NOTE: There must be a minimum of
30mm between the electrical connector and
the protective sleeve.
Use suitable tape to secure the protective sleeve to
the rear Parking Aid system sensor wiring harness.
130
mrrj
5. ~
NOTE: Repeat this procedure on all rear
Parking Aid system sensors.
Make sure the rear Parking Aid system sensor
wiring harness is located correctly on the cable tie.
https ://topix.landrover.jlrext.com/topix/service/document/49 8512
10/3/2014
Page 8 of 10
6. ~
NOTE: Repeat this procedure on all rear
Parking Aid system sensors.
Install the protective sleeve on the rear Parking Aid
system sensor wiring harness.
7. ,~
NOTE: Repeat this procedure on the four
bumper sensors.
~
NOTE: Make sure the protective sleeve is
a minimum of 30mm from the electrical
connector.
Install the protective sleeve on the rear Parking Aid
system sensor wiring harness.
https ://topix.landrover.jlrext.com/topix/service/document/49 8512
10/3/2014
Page 9 of 10
8. ~
NOTE: Repeat this procedure on all rear
Parking Aid system sensors.
Use suitable tape to secure the end of the
protective sleeve to the rear Parking Aid system
sensor wiring harness.
9. Secure the rear Parking Aid system sensor wiring
harness into the wiring harness channel.
https ://topix.landrover.jlrext.com/topix/service/document/49 8512
10/3/2014
Page 10 of 10
10. Install the rear bumper cover (see TOPix Workshop Manual, section 501-19).
11. Check the operation of the Parking Aid system.
https ://topix.landrover.jlrext.com/topix/service/document/49 8512
10/3/2014
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAM
and 64GB ROM, serving up to 5X faster than older MAX/MINI/PLUS vehicle scanners, no more slow and delayed feedbacks, it's time to update your garage tool. - [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCA AutoAuth（The 689BT only provides a login and purchase portal, and users are required to register for an FCA account and pay a membership fee in order to perform the relevant automotive diagnostics)
- [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
- [Hot Advanced Features] 689BT bidirectional tool newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
- 【Warm Tips】Wired THINKSCAN 689 is connected through a detachable OBDII cable, and we also have added OBD2 Extension Cable (about 60 cm/2 feet) as g ift, enabling customers handling vehicle repairs with ease. Just click "Bundles Item" above to get it.
- 【Professional Car Diagnostic Tool】Tired of renew fees? Thinkscan 689 scanner provides dealer-level advanced functions for lifetime f.r.e.e update for auto mechanics and repair shops. 34+ Services, 3000+ Active Test, ECU Coding, 140+ Brands Coverage, FCA AutoAuth, CANFD&DOIP Protocol, Component Matching, Power Balance, V.A.G Guided, Compatible with Google Chrome integration, etc. With strong hardware backing, 64G Memory, Android 10, 4-core processors, and 4150mAh battery. Thinkscan 689 brings you the best as your daily business helper and never lets you drop the ball!
- 【Over 34 Reset Service, Adaptation + Relearn + Calibration + Initialization + Matching】Made for workshops, Thinkscan 689 scanner provides 34+ services for worldwide vehicles: such as Gear/SAS/EPB/TPMS/D.P.F/I.M.M.O/BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset, ABS Bleed, Injector coding, etc. Warm tips: Compatibility may vary on vehicles' model and year, please contact seller before purchase to make sure it works well on your cars.
- 【Real Active Test】Thinkscan 689 scan tool features over 3000+ full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior&exterior lights, sound horn, test door lock actuators, turn on/off front/rear side ACM Solenoid, Vehicle level position calibration, Wheel Speed Sensor Supply.
- 【Comprehensive Solutions with Advanced Features】Take your vehicle customization to the next level with the Thinkscan 689's advanced ECU coding capabilities. This scan tool provides power balance, PMI, unlock more new features and enhance performance by activating dormant functions, customizing OE settings, matching replaced components, and reprogramming adaptive data to elevate your driving experience. Note: Compatibility varies by car models, please check before order.
- 【Powerful Bidirectional Control -- Active Test】Good News! The THINKSCAN 662 obd2 scanner has bidirectional control function,which is the most popular feature among mechanics.This function is mainly used to test whether the executing components in the electronic control system can work normally,By requesting information from the vehicle's ECU or sending commands to the ECU module to execute commands and identify maintenance status,quickly locate the cause of the fault.Such as ABS,Fuel Injectors,Adjusting Throttle,Coolant Fans,Radiator Fans,Coolant Pumps,EV.AP Test, Fuel Trim Reset,Injector Buzz Test,Pump/ Value Test,etc. Effectively shorten diagnosis time and reduce diagnosis costs.
- 【Unlock Pro-Level Diagnostics With Half Costs】 THINKSCAN 662 obd2 scanner diagnostic tool Delivers Premium Scanning Power for Half the Price! The OBD2 scanner can handle common issues with ECM,TCM,ABS,SRS. It can easily read and clear fault codes, analyze data streams, and ensure quick identification of problems. THINKSCAN 662 bidirectional scan tool has 12 practical reset functions, including Airbag Reset,ABS Bleeding,BMS,Brake Reset, D.P.F,Throttle Adaptation,Injector Coding,OIL Reset,steering angle Reset,Gearbox,TPMS,and more. The car scanner diagnostic tool very suitable for DIY enthusiasts, car repair technicians, and small and medium-sized repair shops.
- 【Multi Functional Intelligent Car Scanner Diagnostic Tool】 Automatic VIN + Real-time Data + DTC Lookup + Historical Diagnostic Records: This OBD2 scanner features auto serch technology, allowing for car recognition without the need for manual input. The real-time data of the car ECU is read and displayed in the form of text or a 4-in-1 merged waveform chart. You can save, share, print or send the entire inspection report via email for analysis. Historical diagnostic reports help you quickly identify vehicle issues and understand the condition of the vehicle. The built-in 'feedback' module provides customized repair Operation recommendations from our certified professionals.
- 【Upgraded Hardware + Ergonomically Engineered】 THINKSCAN 662 OBD2 scanner has a friendly combination of touch screen and physical buttons with an ergonomic appearance for comfortable use.Experience 2x faster scans and 50% longer lifespan vs standard models.This scanner para autos boast a 4-core 1.8GHz CPU,6.2-inch HD touch screen,2GB RAM + 32GB ROM storage capacity,a long-lasting 4150mAh battery,Android 8 ensures lightning-fast bootup and processing.The scanner is robust with rubberized protection that you can store and use in the trunk or garage.Whether you are engaged in Home car maintenance or road rescue car repair,this car scanner can help you perfectly solve car problems.
- 【Effortless Setup & Scanning - Intuitive for All Skill Levels】No More Complicated Scanners! The User Interface is as User-Friendly as THINKCAR 689BT! Truly Plug-and-Play,The downward sliding setup shortcut portal and drawer function shortcut portal make you use this scan tool as easy as using your own cell phone.The car scanner supports setup screenshot,screen recording,volume adjustment,this scan tool includes product e-manuals,instructional videos,and fault code libraries,users can check the usage guide,perfect for DIY car owners,Maintenance technician.If your father,husband,brother,boyfriend enjoys car repairs,THINKSCAN 662 is a great gift choice, and it has amazing family value.
This product presentation was made with AAWP plugin.
Last update on 2026-05-11 / Affiliate links / Images from Amazon Product Advertising API