2017

Q3
Audi Pre-Delivery Inspection
Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information

Vehicle Preparation

Trunk Inspection (continued)

 Check Elsa for open campaigns and updates

 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*

 Deactivate vehicle transport mode*
This step must be performed with the engine off, and ignition on

 Verify tool kit is installed securely in luggage compartment
 Set spare tire pressure*

 Set adaption channel to enable CD Ripping (if equipped with
NAV)*

Interior

 Set service reminder*

 Verify operation of all seat belts and latches

 Perform any open campaigns *

 Check operation of window, lock, and seat controls*

Under the Hood Inspection
 Check battery clamps for proper torque*
 Perform a battery test*
 Check engine oil level*
 Check all fluid levels and top off if necessary

 Check rear view mirror operation*
 Inspect mirrors for proper operation*
 Verify operation of all interior lights
 Verify operation heated seats (if equipped)
 Verify proper operation of climate control*
 Inspect operation of all power outlets

Exterior

 Check panoramic sunroof and sunshade operation*

 Check all key buttons and features*

 Verify operation of front Passenger Occupant Detection
System

Lighting and Windshield
 Test exterior lighting functions
 Install wiper blades
 Test front washers (and headlight washers if equipped)*

Settings
 Set Time source setting to “GPS” and set Auto daylight savings time to “on.”*
 Verify and set language and Measurement Units*

Trunk Inspection

 Verify speech dialog system is operating*

 Verify power tailgate is operational and set default opening
height*

 Load Onboard Video Tutorials from SD card*
 Set “Music volume while parking” to 6 lines*
 Set dealership location in navigation (if equipped)*

Effective 8-18-2016-US
Version 1.1

PRE-DELIVERY INSPECTION (PDI) | 1

Audi Serv ice

2017

ED
Audi Pre-Delivery Inspection
Media/ Ra dio/ SAT

Driving Perform ance (cont inued)

D Verify operation of AMI
D Verify operation of CD/DVD player (if equipped)
D Insert SD card and test function of all slots
D Program the presets to local stations
D Verify HD Radio is turned "off"*

D Test drive vehicle applying brakes several times*
D Check steering/tire alignment
D Check for squeaks, rattles and wind noise
D Calibrate rear view mirror*
0 Verify quality of radio reception in AM/FM/SiriusXM bands

Audi connect (USA ONLY) ( if equipped)

Driver Assista nce

D Verify Audi connect Information Packet is present*
D Connect the dealer demo SIM card to verify system (if

D Verify all cruise control functions
D Verify Audi side assist functionality (if equipped)
D Verify operation of parking system (if equipped)*
D Activate NAV and follow directions back to dealership (if

equipped) connects to mobile network*

D Turn on the wireless network (if equipped)*
D Check Wi-Fi hotspot functionality*
D Enable Google Earth (if equipped)*

equipped)
Post-Road Test Inspection

D Interrogate fault memory and print Diagnostic Log
D Ensure the yellow tire pressure tag is installed on the steer-

On-H oist Inspection

D Remove transport suspension blocks (follow ELSA instruc-

ing wheel

tion)

D Check steering, boots, brake system, hoses, tires and wheels D Apply Inventory Maintenance Sticker
for damage
D Install showroom charger to ensure battery remains
charged at all times
D Check underside of vehicle for fluid leaks and loose components

D Inspect wheel bolts for proper torque*
D Install wheel locks (if equipped)
D Install wheel bolt covers and center caps as supplied*
D Set and store tire pressures for either sold vehicle OR stock
inventory ve hide*
Driving Perform ance

D Check horn operation
D Verify hold and release of electronic parking brake
D Verify engine performance and acceleration*
D Verify transmission operation, including shift paddles (if
equipped)

~,~
~

~

Technician

I certify that all opecat;oas ha,e beeo rnmpteted aod th;, ,ehkte has beeo pee pared ;, acrn,dao